Reviews Ball Socket Joints

Charchendo Tablet Holder for Spin Bike, Universal Handlebar Phone Mount with Gooseneck for Stationary Exercise Bike, Elliptical, Compatible with iPad Pro/Air/Mini, Smartphones More Devices 4-13''

  • COMMERCIAL GRADE SOLUTION - This tablet mount is the ultimate mounting device for commercial applications, where downtime is not an option. The all metal clamp, metal arms, & metal ball and socket connections couple with a lightweight engineered polymer tablet cradle is the optimal solution for commercial applications..
  • TABLET COMPATIBLITY - Our spring loaded cradle coupled with 1.25" deep grips accommodates most all tablets on the market even with thick protective cases. Compatible with iPad Mini, iPad 10.2, iPad Pro 12.9, Surface Pro, Surface Go, Samsung Galaxies and everything in between..
  • CLAMP COMPATIBLITY - Tackform's Mega Clamp Tablet Mount will securely hold round bars up to 2" in diameter or table up to 2" thick..
  • 4.75" METAL ARM W/ DUAL METAL BALL AND SOCKET CONNECTIONS - Not all ball and sockets are created equal. Metal ball and socket connections can securely lock into place for a slip free hold while riding. With a simple half turn of the adjustment knob you can loosen, reposition, and relock into place. Dual ball and socket joints allow for a huge range of motion for the perfe....
Check Stock

ABN Double Side Socket 4-Piece Impact Lug Nut Socket Set - 1/2 inch Drive Flip Sockets Thin Wall Tire Sockets

  • [Flip-Style Lug Nut Socket Set] Change tires, repair brakes, or replace ball joints and bushings easily with the ABN Double Sided Lug Nut Socket Locking Lug Nut Removal Tools.
  • Fits 6 of the most common lug nut sizes for removal and installation.
  • [Various Sizes to Meet Your Needs] Lug nut impact socket set includes a 19mm to 17mm socket, a 13/16-inch to 3/4-inch socket, a 7/8-inch to 21mm socket, and a 1/2-inch drive extension bar.
  • [Unique Design] Thin wall wheel sockets feature 6 point flank drive for a snug hold without damaging fastener corners.
  • 3-inch (7.6cm) extension bar and thinner walls ensure clearance into tight recessed wells.
  • [Built to Last] Drop forged, heat-treated chrome-molybdenum steel (CR-MO) provides maximum strength and durability while the black oxide finish resists corrosion.
  • [Convenient Storage] 5.5 x 5 x 2-inch (14 x 12.7 x 5.1cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • Each impact lug socket has laser-etched size labeling for easy identification.
Check Stock

Drixet 3/8 & 1/2-Inch Drive Impact Universal Swivel Joint Set | 2Pc Cr-Mo Ball Type Flexible Wobble U-Joint Socket Adapters for Hard to Reach Nuts/Bolts

  • The Drixet Cr-Mo Impact Universal Flexible Joint Socket Holder Pack is designed with Pins to be used with impact wrenches transferring torque to allow sockets to be bent & access nuts/bolts in hard to reach tight areas with no trouble, while sustaining the greatest torques..
  • SPECS: Square Head Dr. Sizes Included: 3/8" 1/2" - Joint Adapter Working Angle: 30 Degree - Material: Chrome-Moly - Length: (3/8") 2" (1/2")-2.5" - Weight: 10 oz..
  • QUALITY: Heavy Duty Rust-Free Rotating Impact Swivels are Made in Taiwan From Drop Forged Heat-Treated Chrome Molybdenum Cr-Mo Steel ensuring a long lasting life without breaking or shattering - Meets and exceeds ANSI/ASME standards..
  • DESIGN: Innovative Ball Spring Design enables 360 Degree Rotation to reach into the hardest spots easily - Finished with Black Phosphate for Ultimate Durability - Spring Ball Bearings holds Sockets Securely on male end - Drive Hole on Female side Locks onto Drive Tang..
  • USES: Useful Wobble Socket Adapters for the Professional Mechanic Workshop, Handyman & Builder to use it with any Cordless/Electric Impact, Torque, & Ratcheting Wrench or Breaker Bar - Useful on Bikes, Automotive Engines, Spark Plugs, O2 Sensor Shields, Exhaust Manifolds, Ball Joints, Stubborn Tire Lug Nuts, Rusty Brake/Su....
Check Stock

Strong Ball Joint,U-Joints and Brake Anchor Pins Press and Removal Tools丨Universal Installation Kit for Pre-pressed Upper or Lower Control Arms

  • This Dynofit U joint and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks, Heat Treated C Clamp Puller is made of high quality material which can excellent press rusted parts effortlessly and it’s not easy to bent..
  • This Ball Joint Press Kits has a wide range of applications, it can not only be used to remove ball joints, but also U-joints and brake anchor pins, the operation is easy which won’t take a long time..
  • Package:10pcs as pic shown in box, 7/8" (22mm)socket recommended, and the exquisite plastic is through heat treated which make the surface more beautiful, you are not only got a set of tool, you also got a nice gift..
  • Well Made: better finish, more smooth screw, flat machined to keep sitting flush against the ball or u-joint, air damping new design thread for little accurate adjustment!.
  • Brand Promise: 1 year warranty, free return replacement or refund if missing parts, thread problems or anything else.
Check Stock

TRQ Rear Suspension Kit Trailing Arms Sway Bar End Links for Buick Cadillac Olds

  • CARBON FIBER BEARINGS -- Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket....
  • HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils.
  • INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation.
  • LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it.
  • ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure.
Check Stock

OEMTOOLS 37089 Ball Joint and U Joint Press Set Forged Steel U Joint Removal Tool Ball Joint Separator Rust-Resistant Coated Ball Joint Removal Tool

  • RELIABLE BALL JOINT PRESS KIT: Don’t let removing and installing ball joints be complicated.
  • Remove ball joints quickly and easily with our ball....
  • VERSTAILE BALL JOINT PRESS: Maintain the health of your suspension system.
  • Our ball joint tool kit works on U joints, brake anchor pins, and more.
  • DURABLE DIY TOOL: Get a ball joint puller kit that pays for itself.
  • Easy to use, our ball joints press kit is excellent for saving on the expense of....
  • PRACTICAL JOINT PRESS: Remove and install ball and U joints with ball joint puller set's selection of adapters.
  • EFFECTIVE PRESS KIT: Don’t rely on makeshift methods and lesser C-clamps to do a heavy duty job.
  • Our ball joints kit system is the best way to....
Check Stock

GEARWRENCH 23 Pc. 3/8\ Drive 6 Pt. Pass-Thru™ Mechanics Tool Set, Standard, SAE/Metric - 893823

  • HIGH QUALITY: These universal joints are made of hardened chrome vanadium steel (Cr-V), and the surface is chrome plated and polished for corrosion resistance and long service life..
  • PRACTICAL: We have also added springs to the two fixed shafts in the middle, so that the universal joint can be kept at any angle without moving, more convenient and practical..
  • RELIABLE: There are also some small grooves in the inner wall of the groove on the driving end, which can be used in conjunction with the locking ball in the ratchet handle to lock the two together securely and not easily dislodged..
  • PERFECT OPTIMIZATION: We have optimized the structure of the universal joint, so that the maximum bending angle of the universal joint can be almost 90 ̊, So this is more suitable for working in a narrower space..
  • RELIABLE: Spring-loaded locking ball keeps the universal joint set securely latch in the groove of the socket sets or extension bar, more reliable during use, not easy to fall off, improve your work efficiency..
  • MODEL: These universal joints are 1/4in, 3/8in, 1/2in in size and are finely machined to meet and exceed ANSI/ASME standards to ensure they will fit on any compatible tool..
Check Stock

Fotga Large Octopus Flexible Portable Camera DV Tripod 1/4\ 3/8\ Stand for Canon Nikon

  • A octopus table-top tripod perfect for a number of applications.
  • Allowing it to level out a camera on the most uneven surfaces.
  • Complete flexibility, made of hard plastic.
  • Universal (1/4" -20 screw) & (3/8" screw) digital camera link attachment.
  • Each leg has nine black ball and socket joints that each have 360 rotational range.
Check Stock

CASOMAN 3-Piece Impact Universal Joint Set - 1/4

  • Precisely machined, made of heat treated chrome molybdenum steel with a corrosion-resistant black phosphate finish..
  • 3-piece set: 1/4-inch. drive, 3/8-inch drive, and 1/2-inch drive impact grade universal joints.
  • Full 360 degree motion allows U joint swivel sockets to access complete rotation to reach tight spaces, access hard to reach fasteners..
  • High-contrast size marking is permanently laser and easy to read, even in low light..
  • Spring loaded ball at the end of bar locks socket into place for security and prevents dropping..
Check Stock

Sea frogs 2.0\ Essential Diving Equipment Ball Arm Ball to YS Mount Arm Underwater Photography Gear Lighting System Aluminum Alloy Diving Equipment Accessory Lightweight Arms AM-3

  • Material: Underwater Diving Light Arms is premium hard-anodized anti-abrasive finish, durable air-grade aluminum. Lightweight aluminum alloy processing ball head socket to meet the highly accurate and durable requirements..
  • Design: Underwater Ball Clamp is adjustable handle design, can connect multiple diving devices.
  • naturally suitable for fingers and made of resin to enhance its operability, with lower power consumption, easy to loose, adjust the relative angle of the joint arms firmly clamp the ball joints..
  • Specifications: 8*4*1.5cm / 3.14*1.57*0.59inch(L*W*H) ,58g, black. Can rotate 360 degrees, and can rotate about 80 degrees in the horizontal direction.
  • have a higher degree of freedom to adjust the direction of the flash..
  • Package Included: 1" Black Standard Underwater Ball Clam for diving housing camera arm GoPro LED light..
  • Widely use: Standard Underwater Ball Clamp for 1" ball compatible with arm brands like Seafrogs,CamDive, Meikon, Ikelite, TLC, Ultralight, Nauticam and others.Wide range of strong practicality, is photography enthusiasts a great choice..
Check Stock