Reviews Baffles Inlet

Majestic Water Spouts Nakano 12 Waterfall Spillway for Fountains Pools Ponds - 316 Stainless Recommended

  • 316 Marine-Grade Stainless Steel - Superior to competitors using 304.
  • Dual Internal Baffles Smooth Turbulance & Promote Waterfall Effect.
  • Perfect for Pools, Fountains, Ponds, Etc.
  • 30 Degree Lip to Avoid Drips onto Wall - Beware of Flat Lip Designs.
  • Dimensions: 11.75" W x 5" D x 3.125" H with 1" Inlet on Bottom.
Check Stock

Funwill Commercial Grease Trap, Stainless Steel Grease Trap Interceptor Set with Removable Baffles for Restaurant Kitchen Wastewater - Shipping from USA

  • ✔️〖PREMIUM QUALITY〗- Made of stainless steel material, will not corrode, chip or peel. Removable baffles for ease of maintenance. It is robust, non-rusting, long lasting that is super durable..
  • ✔️〖REMOVABLE DESIGN〗- Removable baffles and buckle lock designed for easy clean and maintenance. It can be arranged in the open air, or underground to prevent freezing..
  • ✔️〖GOOD KITCHEN HELPER〗- It is an important component for any kitchen help in averting the upsetting consequences of blocked drains, foul odors and malfunctioning septic systems..
  • ✔️〖EASY TO INSTALL〗- Just connect the pipe run from the sinks and dishwasher to the grease trap inlet. Then pipe the grease trap outlet directly to drain. (Recommend: Solvent weld pipe is used for a secure fit, also make sure the trap is on the flat floor.).
  • ✔️〖APPLICATIONS〗- The product is suitable for the treatment of oily water of mineral oil, ith high-efficient oil-water separation effect. Widely applicable to petroleum, chemical, oil field, shipbuilding, port and municipal engineering industries, catering industry, etc..
Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

XuSha US Stock Commercial Grease Trap 25lbs 13GPM Interceptor Stainless Steel for Restaurant Kitchen, Side Inlet

  • ...easily remove the collected residual waste. The threaded pipe is tightly installed with the grease trap, and the locking devices on both sides to prevent leakage..
  • ❤【PRINCIPLE】- Waste water flows into the grease trap from the sink, the fats, oils and grease will rise to the surface and be collected between the baffles, and the solid particles will sink. Food particles and grease are kept in the device. The removable filter basket can easily remove residual waste. The side outlet helps to take out any liquid for future clean up when needed..
  • ❤【EASY TO INSTALL】- Connect the pipe run from the sinks and dishwasher to the Grease Trap inlet.Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school or small sink or dishwasher applications..
  • ❤【PRECAUTIONS】- 1. When heating with electricity, water must be immersed in the heating device. 2. Select the oil-water separation device according to your own drainage volume. 3. At least 2-3 times a month to clean up the sediment, oil or sludge inside the water tank..
Check Stock

Big Dipper W-250-IS - 25 GPM Stainless Steel Automatic Grease Removal Unit

  • ... is strong and durable, anti-corrosion, not easily deformed. The double-layer edging process makes the edge feel more comfortable and will not cut your hands..
  • 【Working Principle】 Wastewater flows into the grease trap from the sink, the fats, oils, and grease will rise to the surface and be collected between the baffles. The water will sink and flow into next section from the bottom of the tee filter pipe. Food particles and grease are kept in the device. The removable filter basket can easily remove residual waste. The side outlet helps to take out any liquid for future clean up when needed..
  • 【Easy To Assemble】 Connect the pipe of the sinks and dishwasher to the Grease Trap inlet. Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school, or small sink or dishwasher applications..
  • 【Precautions】 1. This product is suitable for the treatment of oily water of mineral oil, animal oil, vegetable oil, mixed oil, and various emulsified oils with a high-efficient oil-water separation performance.2. Select the oil-water separation device according to your own drainage volume. 3. Clean up the sediment, oil, or sludge inside the water tank at least 2-3 times a month..
Check Stock

NVX XBAF69 Foldable Silicone 6\ x 9\ Speaker Baffle with Egg Crate Foam, one Pair/Box

  • While average speaker baffles are made of foam materials that will deteriorate over time, these NVX XBAF69 baffles are made of a durable silicone that will last a lifetime..
  • At times, the inside of your door panel can be exposed to water which can damage your baffles. These baffles are made of waterproof materials that will not be susceptible to the same damage..
  • Foldable Silicone with egg crate foam compatible with 6" x 9" speakers..
  • Easy Installation with minimal trimming or cutting..
Check Stock

NVX XBAF65 Foldable Silicone 6.5\ Speaker Baffle with Egg Crate Foam, one Pair/Box

  • Our XBAF speaker baffles create a tight and secure seal around your speakers, allowing for optimal sound quality. The egg crate foam at the bottom of the baffle helps create a barrier between the speaker and the metal door itself..
  • The XBAFs are engineered with high-quality silicone which lasts a lifetime. Sometimes, moisture may accumulate in your door panel. Our waterproof silicone baffles will keep your speaker safe and keep their shape, unlike comparable foam baffles..
  • The silicone design also allows for simple customization of the baffle to match the proper mounting depth. These baffles are available in most car speaker sizes including 5.25.
Check Stock

NVX XBAF68 Silicone 6x8 Speaker Baffle with Egg Crate Foam, one Pair/Box

  • Our XBAF speaker baffles create a tight and secure seal around your speakers, allowing for optimal sound quality. The egg crate foam at the bottom of the baffle helps create a barrier between the speaker and the metal door itself..
  • The XBAFs are engineered with high-quality silicone which lasts a lifetime. Sometimes, moisture may accumulate in your door panel. Our waterproof silicone baffles will keep your speaker safe and keep their shape, unlike comparable foam baffles..
  • The silicone design also allows for simple customization of the baffle to match the proper mounting depth. These baffles are available in most car speaker sizes including 5.25", 6.5", 6x8", 6x9", and even 8"..
  • Our silicone baffle rings are the most simple accessories you can install to make your speakers sound amazing..
Check Stock

AnEssOil Commercial Grease Trap Stainless Steel Interceptor 0.25 Ton/h (45x25x25cm)

  • 【Overall dimensions】35x20x18cm/45x25x25cm/60x30x30cm.
  • Weight: 5.5 lb (2.5 kg) / 10.1lb(4.6 kg) / 16lb/(7.3 kg) ；Material: Heavy Duty 0.6mm Thickness Stainless Steel.
  • 【High quality】Made of heavy duty 0.6mm thickness stainless steel. Anti-rust, anti-corrosion, non-deformation long service life. Flowing speed up to 0.15 / 0.25 /0.5 Ton/ H.
  • 【Easy to clean】Baffles are removable,Locking device at both side prevent side leakage of sewage. Faucet switch makes it easier to control the outlet of sewage. Lifting handle at the top allows easy transportation..
  • 【Easy to install】 Our Grease Traps are delivered fully assembled and couldn't be easier to install. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to drain. We recommend solvent weld pipe is used for a secure fit. Also make sure the trap is on the flat floor..
  • 【100% Refund guarantee】We guarantee 3 year warranty, free parts exchanged, you can be sure to buy. If you are not completely satisfied with our products, we will give you a full refund..
Check Stock