Reviews Backdraft Damper

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Vent Deflector (4 in)

  • 【Material】The 4 inch backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

iPower 4 Inch 8 Feet Non-Insulated Flex Air Aluminum Foil Ducting and Backdraft Shutter Damper for HVAC Extractor Fan Vent, Range Hoods, 2 Clamps Included

  • Ducting size: 4 inches (diameter) x 8 feet (length) when fully extended. Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃). A pair of 4 inch stainless steel metal clips makes the installation firmer.
  • Fire proof coating ducting: Flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.
  • Backdraft Shutter Damper: Made of a Galvanized steel. Withstand temperatures from 14 to 140 °F. Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Low noise design: An internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for backdraft shutter damper horizontal installations so that it can open and close optimally.
  • Wide applications: A pair of metal clamps makes ducting and damper securely fixed. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock

HVAC Duct Start Collar, 12\ Round Snap Together Sheet Metal

  • 4" Plastic inline round duct connector with backdraft damper..
  • Outside dimension of the duct fits 4" inch flex or solid ducting pipe..
  • Assembly: Press on chosen duct - flexible or straight - and use montage glue. tape or steel clamps tighten the connection..
  • Connect dryer duct, exhaust or any other duct that needs only one way airflow with this backdraft preventer to ensure required air direction, and remove polluted air from accessing habitable areas..
  • perfect for Heating. cooling or air conditioning - HVAC. bathroom and kitchen air exhaust. Heat-resistant from: 5 °F to 160 °F..
Check Stock

Jamborum Backdraft Damper – 4 Inch Round – Prevent Unwanted Drafts in Metal Ducts – Professional-Grade Heavy Duty Galvanized Steel with Aluminum Flaps – Spring-Loaded One-Way Airflow Insert

  • Backdraft damper shutter – 4 inch – round – designed to prevent backdraft cold or warm air from flowing the wrong direction in air duct.
  • Easy installation – can be used in AC units, installation in dryer ducts, bathrooms, range hoods and heating systems, and more.
  • Heavy-duty, durable galvanized steel – strong aluminum butterfly flaps – designed to be long-lasting and functional.
  • Interior and exterior seal hold the unit in place in the air duct and prevent flaps from making loud clapping noise, spring-loaded flaps for positive....
  • Save energy and money by preventing backdraft – maintain the most desirable temperature, hassle-free, set it and forget it.
Check Stock

iPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • ...eating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

  • ...eating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different. Size: 4'' Inch.
Check Stock

iPower 4 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 4", HVAC Extractor Fan Vent, Range Hoods

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 4 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathro....
Check Stock

Exhaust Fan, MYGHKO Ultra Silent Kitchen Bathroom Exhaust Fan with Anti-backflow Check Valve, 4 inch Window Exhaust Fan Ventilation Fan Ceiling Wall Fan Extractor Blower household Ventilation Fan

  • 4INCH HOUSEHOLD VENTILATION FAN - You may be aware excess moisture and muddy air lead to poor air quality and life quality. It is necessary to choose a high-efficiency exhaust fan with a backdraft damper for your room. This functioning ceiling wall exhaust fan can promote air circulation, take the muddy air away and maintain proper humidity and a healthy living environment.
  • HIGH-EFFICIENCY PERFORMANCE - The upgraded high-efficiency motor and stable fan frame can reduce the friction coefficient and operation noise, increase the performance of kitchen bathroom fan and savings in the electrical bill effectively. Ultra silent bathroom exhaust fan provides quiet and effective exhaust ventilation at 122 CFM to eliminate humidity, tobacco smoke, and cooking odors to keep your house smelling fresh.
  • SPEEDY EXHAUST & BACKFLOW-PROOF SHUTTER- MYGHKO exhaust extractor fan with light and thin backdraft damper sleeve, which can expand the exhaust opening angle for speedy elimination of turbid and moist air. A spring-loaded auto-closing damper valve can prevent smoke, debris, dust, and odors of the public flue from entering rooms.
  • BUILT WITH CARE - Our commitment to making things that last means we source materials carefully. The mainframe consists of a waterproof ABS ....
Check Stock

MYGHKO Exhaust Fan, Ultra Silent Kitchen Bathroom Exhaust Fan with Anti-backflow Check Valve, 6 inch Window Exhaust Fan Ventilation Fan Ceiling Wall Fan Extractor Blower household Ventilation Fan

  • 6 INCH HOUSEHOLD VENTILATION FAN - You may be aware excess moisture and muddy air lead to poor air quality and life quality. It is necessary to choose a high-efficiency exhaust fan with a backdraft damper for your room. This functioning ceiling wall exhaust fan can promote air circulation, take the muddy air away and maintain proper humidity and a healthy living environment.
  • HIGH-EFFICIENCY PERFORMANCE - The upgraded high-efficiency motor and stable fan frame can reduce the friction coefficient and operation noise, increase the performance of kitchen bathroom fan and savings in the electrical bill effectively. Ultra silent bathroom exhaust fan provides quiet and effective exhaust ventilation at 142 CFM to eliminate humidity, tobacco smoke, and cooking odors to keep your house smelling fresh.
  • SPEEDY EXHAUST & BACKFLOW-PROOF SHUTTER- MYGHKO exhaust extractor fan with light and thin backdraft damper sleeve, which can expand the exhaust opening angle for speedy elimination of turbid and moist air. A spring-loaded auto-closing damper valve can prevent smoke, debris, dust, and odors of the public flue from entering rooms.
Check Stock