Reviews Axle Shafts

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

• [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
• The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
• [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
• [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
• Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
• Use lubricant fluid for added ease (not included).
• [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
• Pulls CV joints on 1986-current Taurus/Sable.
• [Built to Last] Hardened hammer shaft provides strength and d....

Wheel Kit, 6" Black Blow-Molded Hollow Plastic Wheels & Axle Caps for 3/8" Axle Shaft - Includes 2 Wheels & 2 Axle Caps (696561)

• For battery chargers with 3/8" axle shaft. Also used on barbecue grills and other light equipment, check dimensions for proper fit. Replaces the following battery charger wheel sets: Associated 605672, Century 413-044-666, John Deere PT1598, PT16173, PT19357..
• PLEASE NOTE THAT THESE WHEELS ARE FOR LIGHT-DUTY APPLICATIONS. DO NOT INSTALL THESE WHEELS ON 2-WHEEL EQUIPMENT THAT WEIGHS OVER 50 LBS. USE ONLY SMOOTH AXLE SHAFTS - DO NOT USE THREADED ROD. DO NOT USE SPACERS, SPRINGS OR SHIMS ON UNDERSIZE AXLES..
• Kit includes 2 wheels, 6" black hollow plastic, and two 3/8" press-on axle caps. Steel axle caps are press-fit, no special tools required..
• Load Rating: 25 lbs per wheel (50 lbs per pair).

NICHE Front Rear CV Drive Shaft Axle Set Kit for 2007-2012 Polaris Sportsman 500 800 1332881 1332935

• Front Axle Replaces OEM Part Numbers: Polaris 1332881, 1332656, 1332501, 1332471.
• Rear Axle Replaces OEM Part Numbers: Polaris 1332935, 1332654, 1332511, 1332421.
• Compatible with: 2007-2012 Polaris Sportsman 500, 2007-2012 Polaris Sportsman 800.
• Ultra Rugged 4340 Chrome-Moly Shafts and Joints, Puncture and UV Resistant Neoprene Boots, Low-Profile Boot Clamps, Resistant to Catching Debris.
• Heat-Treated Bearings an Joints, Packed with High-Performance Moly Grease, Fully Assembled Including Inner & Outer Joints on the Shaft.

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

• Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
• Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
• Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
• Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....

WINTOOLS 36mm 1/2" Drive 6 Point Axle Nut Socket

• For removal and installation of axle nut and automatic transmission tail output shafts.

Rcv Dana 30 And 44 Axle Tube Seals Rebuild Kit

All Balls Racing 85-1044 Wheel Stud and Nut Kit

• ...M IRS 2015 - 2018. Honda TRX500FM Solid Axle 2014 - 2018. Honda TRX500FPA 2012 - 2014. Honda TRX500FPE 2007 - 2013. Honda TRX500FPM 2008 - 2013. Honda TRX500TM 2005 - 2006. Honda TRX680 Rincon 2017 - 2018..
• Kit contains all of the components required to properly rebuild the swing arm bearing assembly..
• Needle bearing shafts are made with SCM415/42 bearing steel that has been hardened and precision ground..
• All metal bushings are case hardened and plated to prevent wear and corrosion..
• POM composite washer bearings replace thru needle washers increased service life and super resistance to water and dirt..

Steel Axle Front CVD Drive Shafts for 1/10 RC Axial Wraith 90018 90048 RR10

• Come assembled for easy installation, Ultra high strength cross pins.
• Increased size universal joint for maximum strength at the joint.
• Some rubbing may occur initially at the link mount screws due to larger diameter shafts..

Steel Rear Axle CVD Drive Shafts for 1/10 RC Axial Wraith 90018 90048 RR10

• Come assembled for easy installation, Ultra high strength cross pins.
• Increased size universal joint for maximum strength at the joint.
• Some rubbing may occur initially at the link mount screws due to larger diameter shafts..

Bang II (Feat. Uppercase 5ive)

• Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
• Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
• The bearing adapters are included in the set.
• We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.