Reviews Axle Assembly

BJTDLLX Complete Rear Axle Kit with Brake Assembly & Pillow Blocks for DIY Go Kart ATV Quad Buggy Mini Bike (No Chain)

  • 【Material】The rear brake assembly kit of the kart is a high-performance aluminum cylinder with pre-installed brake fluid.
  • the brake disc is made of high-quality steel, which is durable and has a long service life..
  • 【Rear Axle Kit】length is 740 mm/29 inches, disc size is 160 mm x 4 mm/6.3 inches x 0.16 inches, T8F 58T sprocket (without chain). This is a complete rear axle kit for karts..
  • 【Rear Brake Caliper Assembly】with master cylinder and caliper, 61 inches/1550 mm brake hose length. This rear brake assembly should fit most pit bikes made in China..
  • 【Wide Range of Applications】very suitable for DIY karting projects or reconstruction. Suitable for four-wheel ATV off-road karts. Suitable for many 50cc 70cc 90cc atv quad bikes, karts, such as atomik, motowork, DHZ, LEI, etc..
  • 【Package Content】rear axle kit + brake assembly + a pair of pillows (without chain). (Package size: 30'' x 8'' x 3'', shipping weight: 12lb)..
Check Stock

Harken MR Single

  • Drill two 3/16" holes on each end of mounting strap at marks corresponding to bolt circle diameter of rear wheel axle.
  • Open single hole in support angles if necessary to fit axle studs or Bolts.
  • Cut and trim strap 3/8" beyond rivet holes on both ends.
  • To clean hubodometer face, use a Damp cloth to prevent scratches. Do not use solvents, paints or thinners.
Check Stock

Flexx Boot FB3000 Small Shaft Universal CV Boot

  • Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function.
  • CV Drive Axle part numbers with an “HD” suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and....
  • An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or....
  • CV Drive Axle measurements are validated after assembly to ensure a proper fit.
  • Threads are precision rolled to ensure proper fit when axle nut is....
  • Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
Check Stock

Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T

  • Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle..
  • Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
  • Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
  • OEM Fit, Quality, Finish - While this is not a genuine....
Check Stock

WPHMOTO Rear Axle Assembly Complete Wheel Hub Kit and 6 Wheel Tires With Rim & Brake Assembly & T8F Chain for Go Kart Quad Trike Drift Bikes

  • This is a high class and durable live axle kit has almost all the rear-end parts you need, perfect for DIY rebuild go kart quad, trikes or drift bikes.
  • The Axle fits 6 inch wheels (rim) with 3 bolt pattern and 3 inch bolt to bolt space.
  • Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm(7/8").
  • Tubeless wheel spec: 14 1/8" Tall & 5 1/4" wide, with 145/70-6 tire, 6" rim.
  • Package includes: (1) Axle Assembly, (2) Wheels (with tire, rim, tube), (1) T8F Chian, (1) Brake Master Cylinder Caliper Assembly, (1) Sprocket, (1)....
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ⚒️ Quick to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use....
Check Stock

Detroit Axle - Front Rear Strut w/Coil Spring Assembly & Shock Absorber Set with Front Sway Bar Links Replacement for 2007-2013 Silverado 1500/Sierra 1500 w/o Electronic Suspension - 6pc

  • Replacement for 2007-2013 Silverado 1500/Sierra 1500 (Excludes Electronic Suspension).
  • Kit Includes: (2) Front Struts and Coil Spring Assembly + (2) Front Sway Bar Link +(2) Shock Absorbers Assembly.
  • Detroit Axle struts are built to the highest quality and offer top performance. O-ring provides pressure to the inner tube and creates a tighter seal to keep the valve less susceptible to dirt, wear and fatigue..
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality.
Check Stock

Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. , RED

  • Rear Drive Shaft Axle Assembly For 2004-2008 Ford F-150 RWD 4.2L 4.6L 144.7 or 144.5 Wheel base, w/10 Bolt Differential Cover.
  • Shaft Length Compressed (in): 90 3/4" | Shaft Diameter (in): 2-7/8 Inch | Measure the Length to Confirm before Order.
  • This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..
  • Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple.
  • 100% new - this drive shaft is made from all new components so there's no core charge or return hassle.
Check Stock

DuroSTEEL Janus 6'x7' Mini Storage 650 Series Metal Roll-up Door Hardware Direct

  • Door Springs : Coated with grease during production, which prevents rust and corrosion Enclosed in a tube for lifetime protection Provide for smooth door operation.
  • Ratchet Tensioning Device : Allows for simplified spring tensioning Tensions all springs at once Requires no pins to hold the tension on the spring.
  • Dead Axle and Torque Tube Assembly: Tube housing protects springs and strengthens the axle Eliminates axle push and shift that a live axle would create Allows for springs to be tuned all at the same time.
  • USUALLY SHIPS 6-8 WEEKS WITHIN THE LOWER 48 STATES AND MAINLAND CANADA. All Doors come standard in High gloss White and mounting to Wood. Other colors and mounting options are available upon request..
Check Stock

DuroSTEEL Janus 4'x7' Mini Storage 650 Series Metal Roll-up Door Hardware Direct

  • Door Springs : Coated with grease during production, which prevents rust and corrosion Enclosed in a tube for lifetime protection Provide for smooth door operation.
  • Ratchet Tensioning Device : Allows for simplified spring tensioning Tensions all springs at once Requires no pins to hold the tension on the spring.
  • Dead Axle and Torque Tube Assembly: Tube housing protects springs and strengthens the axle Eliminates axle push and shift that a live axle would create Allows for springs to be tuned all at the same time.
  • USUALLY SHIPS 6-8 WEEKS WITHIN THE LOWER 48 STATES AND MAINLAND CANADA. All Doors come standard in High gloss White and mounting to Wood. Other colors and mounting options are available upon request..
Check Stock