Reviews Axial Flow Check Valve

EVIL ENERGY 1/2 12mm Non Return One Way Check Valve for Fuel Line Oil Petrol Diesel Aluminium Silver Pack of 2

  • Function: The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel....
  • Feature: The non return check valve body is made of high quality aluminum alloy can use longer than plastic one. Stable characteristics, high....
  • One-way Check valve installs in many diesel / bio fuel systems / Carburetors and low pressure fuel systems where you desire fuel to only flow one way.....
  • Easy installation and replacement. According to the little arrow on the valve, connect the fuel line. You can use some hose clamps which can make sure....
  • The minimum upstream pressure required to operate the aluminum one-way check valve is 2.9psi (0.2 bar). Working pressure:2.9-87 psi (0.2-6bar)....
Check Stock

Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces

  • Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
  • Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
  • Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
  • This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
  • Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
  • Note: when installing the check valve, pay special attention to the flow direction of the medium.
  • The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Check Stock

Walfront 12V 0.9A Water Pump Mini Self Priming Single Cylinder Piston Pump with 10 Meters Lift Portable Low Noise, Various Pumps And Accessories

  • Great practicability: Piston pump can self-prime and can output relatively large pressure.
  • Made of high quality electronic components, stable and reliable performance..
  • Improved configuration: The pump head is equipped with a check valve, which can control the fluid quality, reduce leakage and improve the working efficiency of the pump..
  • Advanced coupling structure: Adopting the coupling structure to reduce the radial and axial pressure of the motor, the motor runs more smoothly..
  • Live up to expectations: This water pump has sealed switch and coating to prevent corrosion, the body is sealed, to prevent incidental moisture and dust from entering. More resistant to corrosion and high temperatures, more durable..
  • Pump working mode: Single cylinder piston.
  • Inlet and outlet: 6MM outer diameter (6x9MM silicone tube is recommended).
Check Stock

PumpSpy Threaded Quiet Sump Pump Check Valve with 100% Stainless Steel Clamps Included - Threads Directly into the Pump's 1-1/2" NPT Discharge to Connect it to a 1-1/2" Pipe - Model CV-150T

  • WIDELY COMPATIBLE: Our sump pump check valve threads directly into a pump's 1-1/2" NPT discharge to connect it to a 1-1/2" pipe and is engineered to allow for maximum flow from your sump pump. Works with any pump containing a 1-1/2" NPT discharge..
  • UNIQUE SPRING-LOADED FLAPPER: The unique spring-loaded flapper on our sump pump check valve eliminates the water hammer noise of standard check valves for silent operation. No more sudden noises that disrupt your lifestyle or sleep. With this check valve, water hammer noise will be a nuisance of the past!.
  • 100% STAINLESS STEEL HOSE CLAMPS: Our sump pump check valve threads directly into the pump's 1-1/2" NPT discharge to connect it to a 1-1/2" pipe and is engineered to allow for maximum flow from your sump pump. With durable ABS construction, you can have a system that'll last for a long time. The use of stainless steel hose clamps prevents rust and corrosion for a secure, leak-proof connection..
  • PRE-DRILLED WEEP HOLE: The pre-drilled weep hole of our pump sump check valve eliminates the air lock that may occur in bottom suction pumps. Our ....
Check Stock

10 pieces Transparent Silicone Duckbill Valve One-way Check Valve 15 x 7.3 x 19.5mm for Liquid and Gas Backflow Prevent

  • 100% full rubber or silicone structure, can meet a variety of high temperature. No clogging good sealing effective prevention of liquid gas backflow.
  • All-rubber structure corrosion resistance long service life good effect And provide a tight seal prevent backflow maintenance-free..
  • When installing the check valve special attention should be paid to the direction of flow of the medium and the normal flow direction of the medium should be consistent with the direction of the arrow indicated on the valve body otherwise the normal flow of the medium will be cut off. Opening the pressure is small generally open 1-5KPA pressure liquid or gas it can open, good sealing Easy to install.
  • Silicone Duckbill Valve Made from Environmentally friendly silicone material.
  • Outer diameter 15, inner diameter 7.3, height 19.5 MM.
Check Stock

Leadrise 12V Electric Fuel Pump Universal Inline Fuel Pump Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A

  • ★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
  • ★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
  • ★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • ★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

Spears S1520-20 PVC Utility Swing Check Valve, 2-Inch, White

  • PVC white utility swing check valve is engineered for maximum flow, quick response and positive shutoff.
  • Offers a compact, high performance check valve for landscape and irrigation, pool and spa, aquaculture, OEM 1 and many general purpose applications.
  • Angled seat and weighted flapper for low-pressure seal.
  • Suitable for horizontal or vertical up-flow installations.
Check Stock

Axial High Pressure Washer Pump 2700 psi 6.5 HP 3/4" Shaft fits Cat General AR

  • Power Washer Axial Horizontal Pump series 15 Full Brass Head.
  • 3/4 Inches shaft suitable for engine 5.5 and 6.5 HP like GX160.
  • PLUNGER SEALS Germany Parker Include detergent injector and Thermal relief valve.
  • Output:M22 -14mm Standard Input: Garden hose connection.
Check Stock

Weathermatic T3-36 Full Circle Sprinkler Rotor

  • Part circle models adjust from 40 – 360°.
  • 14 field-changeable nozzles – SmartAngle (low angle) and Flow.
  • Standard Ready Check check valve on T3 and T35 models is easily reversed in the field to a “check” position. Check valve holds back 12’ (3,7....
Check Stock

JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)

  • Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
  • 1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
  • Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
  • Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
  • Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
Check Stock