Reviews Automobile Relay - BestBuyersPro.com

5 Pin 12V Relay 12V 30A Relay Multi Purpose Automotive Relay Black Starter Relay Car Heavy Duty Relay for Car Motor Automotive Replacement Accessories (8 Pieces)

Sufficient for using: you will receive 8 pieces 12V 30A 5 pin relays, the size is about 1.02 x 0.94 x 0.63 inch/ 2.6 x 2.4 x 1.6 cm, enough quantity can meet your daily use and replacement, you can share them with your friends and family who need them, these relays are 5 plug please note when ordering.
Stable for long time use: the black shell of the 12V car relay is made of nylon material which is electrical insulation, the pin is made of brass, which can withstand cold and hot condition, stable and reliable, not easy to break, deform or rust, applicable for a long time.
Easy to use: the motor relay is suitable for normal automobile use and simple to operate, you just need to connect the relay with the wire, no other tools needed, convenient for your use and replace, allowing your components to work properly.
Specifications information: 30A 12V Relay can be applied to control electrical circuits for components on a vehicle that have a high amperage load, such as headlights, fuel pumps and cooling fans.
Extensive usages: the automotive relay is practical and convenient, can be applied to car tail light, engine compartment, electric cooling fans, electric water pumps, electric fuel pumps, shaved door handles solenoids, trunk solenoids and other equipment.

【Celsius & Fahrenheit Display】Programmable mini digital temperature control unit with -50℃ to 110℃ (-58℉ to 230℉) measuring range.
Thermostat regulator switch module has dual LED display the set temperature and current temperature, with waterproof NTC (10K 0.5%) temperature sensor probe, on-board tactile push button set the trigger temperature and alarming temperature.
12V 1CH relay control the power on/off when the ambient temperature reach the set value, low power sumption <.
Easy installing and setting in 30 minutes, splotting size 46 X 26.5mm/1.81 X 1.04inch (L*W).
Power Supply: DC12V 200mA, Module Size: 48 X 29 X 32mm/1.89 X 1.14 X 1.26inch (L*W*H).
Cable Length: 30cm/12inch, Probe: 2cm/0.8inch.
Widely used at smart home, industrial control, automatic irrigation, indoor ventilation and protection equipment. Such as temperature control of production workshop, car or automobile, hatching aquaculture, tobacco industry, printing house, aquarium, fish tank, heater, cooling equipment, bedroom and so forth.

Large Capacity Relay Holder – This relay box is 6 slots relay panel design, which includes 5 slots for 5 pin Bosch style relays, 1 slot for RTT7121 4 pin relay..
ATC/ATO Fuse Relay Box – This fuse block with relay is also 6 slots relay holder design for ATC/ATO fuses, which makes the fuse relay become safer when use..
Suitable Terminals – This 12v relay box will also come with terminals for relays and fuses, which will enables you to install and use the fuse and relay box at once..
Top & Bottom Cover – This relay box 12v automotive will come with a top cover and a bottom cover, which makes the relay fuse box become a waterproof relay box..
What you get – 1 x Fuse Relay Block with Top and Bottom Cover, 5 x Bosch Style 5 Pin Relay, 1 x RTT7121 4 pin relay, 16 x Blade Fuses(4 x 10A, 4 x 20A, 4 x 25A, 4 x 30A), 41 x Metallic Terminals, 1 Year Warranty. Feel free to contact us if confused..

Kit includes Relay Buddy tester, 5 new relay adapters and blow mold case.
Relay Buddy is a quick go/no go tester for the most common automotive relays.
With the included adapters, Relay Buddy now tests 5 different relay types and also tests shielded relays.
Relay Buddy will fail the relay and light the red LED if any of the test cycle proves unsuccessful during the test session.
Settable to 4 and 5-pin relay and uses vehicle's 12 volts battery for power.

Able to test an entire circuit - from battery to component, including the relay With this item the technician can jump a relay.
do an AC charge from the relay by activating the compressor.
do compression testing by activating the starter relay and even check turn signals or lights from the front of the car.
Allows the technician to diagnose the problem without the use of a multimeter.
The lighted display shows the technician the problem immediately.
With this item the technician can jump a relay.
Includes: (1) Tester, (6) popular Relay Leads, and (1) Universal Relay Lead.

Output: fan relay, alarm relay and 4-20ma current loop.
Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
Mounts on a standard 4” x 4” electrical box.
5 a spdt fan relay controls starters of exhaust fans.

NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
Module with overcurrent protection and relay diode freewheel protection..
NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.

Output: fan relay, alarm relay and 4-20ma current loop.
Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
Mounts on a standard 4” x 4” electrical box.
5 a spdt fan relay controls starters of exhaust fans.

Tests 5 different relays, both 12V and 24V and 3 diagnostic trouble codes help define the cause of the bad relay.
Kit Includes 5 Relay Adapters and blow mold case.
Fails bad relays - Good/Bad indication, green light for PASS, red light for FAIL with flashing trouble code.
Tests 5 different relays, both 12V and 24V.
3 diagnostic trouble codes help define the cause of the bad relay.
#193 Kit Includes 5 Relay Adapters and blow mold case.
Quick off-the-car relay tester - checks relay coil & switch contacts.

DIRECT RELAY REPLACEMENT- Our 4-pin relay is a direct factory replacement for the Toyota 90987-02006 OEM relay only priced more attractively..
EASY & AFFORDABLE MAINTENANCE- Keep your Toyota or Lexus vehicle running at its best with this plug & play replacement relay.
OEM-STYLE QUALITY- Manufactured to the same quality standards as the Toyota 90987-02006 relay, the OLS RTT7121A 12V 40A 4-Pin Relay delivers OEM-style quality..
COMPATIBLE WITH POPULAR TOYOTA & LEXUS CARS- Fits popular Toyota models: 1986-1991 Camry, 1995-2007 Corolla Sedan, 1990-1999 Previa, 1994-1997 RAV4, 1984-1997 Tercel, and much more..
COMPATIBLE WITH OLS 12-SLOT RELAY BOXES- This 12V 40A 4-pin relay is also compatible with our 12-Slot Relay Box (PSZACCEPS142R)..