Reviews Automobile Disc Brake Calipers

ACETOP Bike Disc Brake Kit, Front & Rear Bicycle Aluminum Alloy Brake Caliper, 2 Pcs 160mm 6-Bolt Stainless Steel Disc Rotors for Mountain Bike, Road Bike, Folding Bike, BMX

  • High-quality Materials: Aluminum alloy bike disc brake calipers, anti-corrosion, anti-rust, high-temperature resistance. The brake surface polished on both sides, and brake is sensitive and quiet. The disc brake base design is resistant to breaking..
  • Appropriate Size: All aluminum alloy bike disc brake kit have 75 mm and 51 mm mounting bolt spacing, and each weighs 174g. The disc Rotor has an inner diameter of 44 mm, an outer diameter of 160 mm, and a thickness of 2 mm, each weighing 95g..
  • Stainless Steel Rotor: Stainless steel ultra-light rotor, which also has excellent braking force and modulation ability. The entire rotor has many ventilation holes to help dissipate heat..
  • Simple Operation: Equipped with 4mm hexagon screwdriver(Size: 60 mm x 22.5 mm.
  • Only for 12 Disc Rotor Titanium Bolts) ,which can be installed and disassembled the front & rear bike brake disc, and it is also very convenient for maintenance..
  • Widely Compatible: Our 6-Bolt rotor calipers exquisite workmanship, it is an ideal upgrade part for your bike, and suitable for most mountain bike and road bike mechanical disc brake systems, and can be used with the majority 6 Bolt compatible hub..
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ...ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for most large trucks and commercial vehicles. Be used on twin and quad piston fixed calipers, as well as single and twin piston floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers..
  • ✔【Satisfactory Customer Service】: AutoWanderer Tool specializes in high-quality auto parts and auto supplies kits. If there is any question with our products or during use, please feel free to contact us first, we are here to provide professional technical support ASAP in 24h and will do our best for your satisfaction..
Check Stock

TOBWOLF 1 Pair MTB Front & Rear Cable Disc Brake Aluminum Alloy Caliper Post Mount 2PCS 160mm Stainless Steel 6-Bolt Disc Rotors for Mountain Bike Road Bike Folding Bike BMX

  • 【Pack & Note】-- Pack of 1 pair Mechanical Disc Brake (0mm for Front, 20mm for Rear), 2PCS 160mm 6-Bolt Disc Rotors, 4PCS 16.8mm fixing bolts, 12PCS titanium bolts. Please check the specifications in the 2 & 3 product image to ensure it match your requirements for proper fit..
  • 【Dismensions】-- All calipers have both 74mm and 51mm mounting bolt spacing, each weights 180g. The Disc Rotor inner diameter 44mm, outer diamerter 160mm, thickness 2mm, each weights 126g..
  • 【Mechanical Disc Brake】-- Cable actuated post mount mechanical disc brake calipers provide excellent stopping power and are easy to service..
  • 【Stainless Steel 6-Bolt Disc Rotors】-- Ultra-light rotors that shed weight and shred trail, while still achieving superior braking power and modulation. With massive vent holes throughout the spider, and drilled holes through your contact patch to help both with heat vetting and weight shaving at once..
  • 【Highly Compatible】-- The gentle sawtooth shaping on the outside diameter decreases the chances that you'll experience brake squeal. It comes with sturdy steel fasteners and will work with any 6 Bolt compatible hubs..
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

BIGTUR Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates/2 pcs Hangers

  • Included: Brake piston calipers equipped with 2 large push plates and 2 brake caliper hooks.The larger plates are held in place by built-in strong magnets and cylindrical pins for quick installation and removal.Hooks can hang calipers, brake tubing, and other parts to facilitate inspection of other car parts while the brakes are being repaired..
  • Easy to use: Ratchet technology gives a full 360° swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”.
  • High quality:Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip..
  • Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers..
  • Professional after-sales team: All kits are provided with lifetime technical support and one-year limi....
Check Stock

Farbetter Bike Disc Brake Kit Including Front and Rear Caliper 160mm Rotor Mechanic Tool-Free Pad Adjuster for Mountain Bike Road Bike Fixed Gear Bike MTB BMX Red

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Rear Brake Cable, 1x Disc Rotor Adjuster, and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets-Disc Rotor Adjuster, help you to adjust the gap between rotor and caliper easily..
  • Ideal Replacement: with fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Widely Compatible: Suitable for most Mountain Bike, Road Bike Mechanical Disc Brake System..
Check Stock

OEMTOOLS 27111 Disc Brake Tool Set Front and Rear Brake Piston Tool 11 Adapters Included for Use with Most Cars Forces or Rotates Pistons into Calipers

  • DISC BRAKE CALIPER TOOL SET: This disc brake caliper tool kit assists in the replacement of brake pads on most 4 wheel disc brake vehicles.
  • WORKS WITH MOST CARS: Our OEM brake caliper tool set includes 11 adapters for use on most domestic and imported cars that require clockwise rotations,....
  • QUICKLY FIT BRAKE PADS: The brake piston caliper tool set forces the pistons straight back into the brake calipers and rotates the pistons back into....
  • HEAVY DUTY DISC BRAKE PISTON TOOL: These brake caliper kits are constructed from steel for long-lasting strength and durability.
  • CONVENIENT STORAGE: This front and rear brake caliper tool set comes in a sturdy plastic case for easy storage, organization, and portability, making....
Check Stock

JOJOY LUX Brake Caliper Press Tool, 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader with Extra 2PCS Large Plates for Single Twin Quad Sextuplet Piston Disc Brake Caliper

  • 【Application】This brake caliper press tool suits for disc brake, NOT for drum brake. The tool is equipped with 2 groups of push boards: 7.01x2.36"and 4.53x2.17".Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress, which some brakes need..
  • 【Labor Saving】Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation..
  • 【Use-friendly】 Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the....
Check Stock