Reviews Automation And Control Piston Hydraulic Cylinder

ACDelco Professional 530-189 Premium Gas Charged Rear Shock Absorber

  • A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life.
  • Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
  • Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
  • Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
  • O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.
  • Fits: Chevrolet- 1988-2003 C3500, 1988-1999: K1500, C1500, 1988-2000: K3500, K2500, C2500. GMC- 1988-2000: K3500, K2500, GMC C3500, GMC C2500, 1988-1999: GMC K1500, GMC C1500,.
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

uxcell UN Radial Shaft Seal 20mm ID x 26mm OD x 5mm Width PU Oil Seal, Blue Pack of 2

  • [Size] - 20mmx26mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UN Radial Shaft Seal 20mm ID x 26mm OD x 5mm Width PU Oil Seal, Blue Pack of 10

  • [Size] - 20mmx26mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UHS Radial Shaft Seal 12mm ID x 20mm OD x 5mm Width PU Oil Seal, Blue Pack of 10

  • [Size] - 12mmx20mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UN Radial Shaft Seal 12mm ID x 22mm OD x 5mm Width PU Oil Seal, Blue Pack of 5

  • [Size] - 12mmx22mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UHS Radial Shaft Seal 20mm ID x 28mm OD x 5mm Width PU Oil Seal, Blue Pack of 2

  • [Size] - 20mmx28mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

Maxim WSB Swivel Ball Welded Cylinder - Double Acting Hydraulic Cylinder 1.5” Bore x 12” Stroke, 0.75” Pin & 1” Rod Diameter, 19.25” Retracted, 3000 PSI, 5300 lb Column Load, SAE 6 Port Size, 10 lb

  • SPECIFICATIONS: This universal hydraulic cylinder is double-acting with a 1.5” bore, 12” stroke length, 0.75” pin and 1” rod diameter. 19.25” Retracted, 31.25” Extended. It offers a maximum working pressure of 3000 PSI, has 5300 lb column load capacity, and SAE 6 port size..
  • PRECISE PERFORMANCE: Our hydraulic cylinder delivers error-free performance in compact and mobile equipment. The heavy-duty piston seals rule out leaks for consistent performance in heavy load applications..
  • HIGHLY RELIABLE: This heavy-duty double-acting hydraulic cylinder with swivel ball mounts is superior in design compared to other hydraulic cylinders. It provides reliable performance in complex applications requiring up to 3000 PSI..
  • BUILT TO LAST: Our welded cylinder withstands high-temperature differences and is corrosion resistant. It has a compact and lightweight design and its welded barrels provide strength and stability to its form and functioning..
  • CUSTOMIZABLE: Our swivel ball hydraulic cylinder can be customized per OEM requirements. It offers 1-inch to 3 inches bore sizes and stroke lengths that can go up from 4 inches to 36 inches for greater convenience and faster action..
Check Stock

uxcell UHS Radial Shaft Seal 11.2mm ID x 19.2mm OD x 5mm Width PU Oil Seal, Blue Pack of 5

  • [Size] - 11.2mmx19.2mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

  • STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
  • maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
Check Stock