Reviews Automatic Joint Rod

Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 7/8’’ x 7/8’’ ID, 3/16’’ Keyway, 1000 RPM, 5” Overall Length, 2.5 lb, 133015

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 7/8’’ x 7/8’’ inner diameter, 3/16’’ keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.5 lb..
  • HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations..
  • TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use..
  • FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications..
  • MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile..
Check Stock

Fishing Rod Holder Automatic Spring Tip-Up Hook with Stainless Steel Ground Support Fish Pole Rack, 2 Packs

  • 【Automatic Fishing Rod Holder】 The automatic spring fishing rod holder has high sensitivity. When the bait is bitten by the fish, the automatic spring device is triggered. The fishing rod holder immediately automatically pulls up the fishing rod without manual operation, freeing your hands and enjoying the fun of fishing easily!.
  • 【Full Automatic Design】The fishing rod holder uses a single spring to automatically trigger your fishing rod. Only when the fish bites the hook, the fishing line swings, the fishing line trigger will activate the flip. Ultra-sensitive, The fishing line trigger hook has 4 levels of sensitivity to choose from, with two high and low spring tensions, and different fishing rod lifting forces can be adjusted, making it easy to catch big fish and small fish..
  • 【Durable & Foldable】The automatic fishing rod holder itself is made of 304 stainless steel, and the edge part is protected by a rubber structure to protect the holder and hand scratches during use, rust- proof, Durable and Abrasive Resistance. Compact folding, small packed, Easy to carry and transport outdoors. It is very suitable for Bank fishing, lakes, ponds, rivers and streams..
  • 【Universal Fishing Rod Holders】The adjustable rubber watch has 4 different holes a....
Check Stock

ABN Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller 5 Piece

  • Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller, Constructed from high strength steel for extra durability and longevity.
  • Allows users to easily service all types of front end issues, everything from tie rods, u joints, ball joints, pitman arms, and others.
  • Includes: 1x Pitman Arm/Tie Rod End Puller, 1x Ball Joint Separator, 1x Pitman Arm Puller, 1x Ball Joint/Tie Rod End Remover, 1x Tie Rod/Inner Bearing Race Puller.
  • Specifications: Large C-shape puller: (1) 1-11/32" Jaw Spread 2-1/2" Throat Depth, (1) Small C-shape puller 1-1/8" Jaw Spread, 2-1/8" Throat Depth, (1) Large swing arm puller 0 to 2-1/2" Jaw Spread 3-1/4" Throat Depth, (1) Small L-shape puller: 3/4" Jaw Spread, 1-3/4" Throat Depth, (1) Large rocker arm puller: 7/8" Jaw Spread, 2-1/4" Throat Depth.
  • This is a must have for anyone servicing vehicles.
Check Stock

Neo Synthetics HP800 High Performance Wheel Bearing Grease, 1 Lb Tub

  • GreaseCo HeavyDuty Grease Cartridge is a Lithium Complex Red And Tacky Grease for use in High Temperature EP Applications.
  • Excellent Tractor Grease, Wheel Bearing Grease, Automotive Grease, Ball Joint Grease, Hitch Ball Grease, Axle Grease, Trailer Wheel Grease, Tie Rod Grease, Bushings, Bobcat Lube Points, Chassis Lubrication, Electric Motors, Gears, Plain Bearings, Presses, Roller Bearings, Steering Knuckles, Trailers, Universal Joints, Winches, And Many More!.
  • An All Purpose Grease Tube for Automotive, Construction, Mining, Hauling & Trucking Sectors Due To It’s Enhanced High Temperature And Extreme Pressure Properties.
  • Universal Fit: Works with Lock N' Lube, DEWALT, MILWAUKEE, Lincoln, Lucas, Ryobi, Bravex, GreaseTek, STEINBRÜCKE and Many More Manual and Automatic Grease Gun Brands!.
Check Stock

BTSHUB 5 in 1 Ball Joint Separator Pitman Arm Puller Tie Rod End Front End Service Splitter Removal Tool Set

  • This ball joint separator tool set is designed for removal of most of popular types of pitman arms, tie rods, and ball joints on most compact cars, mid-size cars and light pickup trucks.
  • Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • Allows for easy removal of most popular types of pitman arms, tie rods and ball joints.
  • Durable heavy duty forged tools constructed from heat-treated alloy steel with anti-rust plating finish.
  • You will get 1x Ball joint separator, 1x Tie rod and ball joint remover, 1x Conical pitman arm puller, 1x Pitman arm and tie rod end puller, 1x Pitman arm puller, 1x Well-organized plastic carry case.
Check Stock

YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup

  • ...th high-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation..
  • This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers..
  • According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
Check Stock

5pcs Front End Service Tool 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit

  • ALL-IN-ONE TOOL KIT - Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm, 1x Pitman Arm Puller, 1x portail custom moded case..
  • COMPATIBLE WITH FOLLOWING VEHICLES - The tool set allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks..
  • HIGH QUALITY - Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms..
  • MULTIFUNCTIONAL USE - Allows for easy removal of the most popular types of pitman arms, tie rods, and ball joints. The press-type ball joint separator allows for ball joint removal without damage to boots and other parts that fork-type removers may cause..
  • PORTABLE CARRY BAG - All-in-one Tool Set in a heavy-duty blow-mold case with handle and latches for secure storage, simpl....
Check Stock

8MILELAKE 6pc Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller

  • [APPLICATION] : This front end service tool allows for easy removal of most popular types of pitman arms, Tie Rods and Ball Joints.
  • [FEATURES] : Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • [ALL IN ONE] : This Ball Joint Separator, Pitman Arm Puller Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x plastic carry case..
  • [DURABLE MATERIAL] : Durable heavy duty forged front end service tools constructed from heat-treated alloy steel with anti rust plating finish. the jaws are shaped to ensure a positive grip, which leaves your hands free for the pulling job..
  • [PORTABLE CASE] : A plastic carry case is included, keep your tool parts well organized, easy for storage and carry out.
Check Stock

OEMTOOLS 37201 Tie Rod/Ball Joint Separator Set, 5 Piece, Replace Tie Rod, Separate Ball Joints and Pitman Arms, Pickle Fork, Ball Joint Removal Tool

  • SPEED UP REMOVAL PROCESS: Pickle fork tool set quickly separates tough-to-reach ball joints during tie rod replacement or maintenance.
  • CORRECT WHEEL ALIGNMENT: Eliminate uneven tire wear, handling problems, steering wheel wandering, and vibration with confidence using the tie rod and ball joint separator tool.
  • Return smooth steering back to working order.
  • BUILT FOR LONGEVITY: The ball joint remover tool has a rust-resistant finish and features knurled handle for a no-slip tight grip.
  • Pickle forks are perfect professional auto mechanics’ tools for difficult and heavy-duty applications.
  • WIDE VARIETY OF OPTIONS: The ball joint pickle fork set includes five different sizes: 11 inch x 1-1/8 inch, 11-3/4 inch x 1-5/8 inch, 11-5/8 inch x 1-7/16 inch, 16 inch x 11/16 inch, 16 in x 15/16 inch.
  • EASY ORGANIZATION: Tie rod removal tool set includes a sturdy blow-molded case for neat organization and rapid identification.
  • Tie rod tool set is easily transportable.
Check Stock

ECCPP Ball Joint Tool 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 For Toyota Tacoma - Inner Tie Rod Ends Lower Ball Joints Outer Tie Rod Ends Upper Ball Joints

  • FITMENT - Inner Tie Rod Ends Lower Ball Joints Outer Tie Rod Ends Upper Ball Joints 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 For Toyota....
  • WHAT YOU GET - 2 EV433 Front Inner Tie Rod End, 1 K90258 Front Lower Ball Joint - Driver Side, 1 K90259 Front Lower Ball Joint - Passenger Side, 1....
  • ADVANTAGE - ONE YEAR WARRANTY - Our products has undergone extreme impact, wear, and fatigue testing to help ensure quality and durability.
  • BENEFIT - Ball Joints can effectively adjust the wheel's steering angle. When added to control arms, ball joint assembly is the perfect fit for....
  • IMPORTANT NOTE - Please check the description or use the year,make,model in the Amazon Fitment Filter System in the top left corner to confirm the....
Check Stock