Reviews Automatic Filament Feeding

IWECOLOR 3D Printer Filament Dual Colors 4* 0.44lbs/Spool Red/Blue, Red/Green, Red/Gold, Blue/Green Bicolor 3D Printing Filament Sets

  • ...asic settings. You can print your creative dual colors in one model, silkglossy smooth appearance. Perfect for arts, crafts, and DIY special 3D print projects at home, Laboratories, studio, or school..
  • 【No-tangle and Easy to Use】Produced with laser diameter control and automatic winding system guarantees success even in the large model prints. Further strict manual examination,to make sure the lines are tidy and no-tangle. A larger 3D printing filment spool inner diameter design makes feeding smoother, without clogging the nozzle or extruder, so as to avoid possible snap and line breaking.In case of any quality problem, pleasefeel free to contact us..
  • 【Strong & Premium Compatibility】No needs for extra polishing and IWECOLOR bicolor filmanet has a strong impact on models, perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure. Silk Dichromatic PLA offers wide temperature and speed ranges to suit all of yourinnovative needs. It can conveniently be used on various mainstream FDM printers..
  • 【Dimensional Accuracy & Consistenc】Weight 1 kg (approximately 2.20 lbs) perspool, around 330....
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Dimensional Accuracy ± 0.03 mm, 1 KG (2.2 LBS)

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender- PLA filament is controlled within ±0.03mm, which makes the feeding more smooth and ensures continuous printing. Recommended Extrusion/Nozzle Temperature 195°C – 220°C, Bed 55°C – 60°C for better printing results.
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no irritating smell and can be naturally degraded.
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity makes the printing easier without plugging, which realizes the exquisite results. The upgrade raw material makes the model support easier to add and remove without warping.
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever....
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Dimensional Accuracy ± 0.03 mm, 1 KG (2.2 LBS)

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender- PLA filament is controlled within ±0.03mm, which makes the feeding more smooth and ensures continuous printing. Recommended Extrusion/Nozzle Temperature 195°C - 220°C, Bed 55°C - 60°C for better printing results.
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no irritating smell and can be naturally degraded.
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity makes the printing easier without plugging, which realizes the exquisite results. The upgrade raw material makes the model support easier to add and remove without warping.
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever or ....
Check Stock

Haosegd 5 Colors PLA Filament 3D Printing Filament PLA Filament 1.75MM 250G 3D Printer Filament Bundle 1250G in Total Tolerance 0.02mm No Clogging & Bubbles

  • 1.75MM PLA Filament Temperature: The nozzle temperature setting for printing with PLA is 190-210 degree. Our engineers recommend starters set 200 degree of printer nozzle and 55 degree of hot bed for getting excellent printing effect..
  • 3D Printing Filament Feature：PLA material has the characteristics of strong adhesion, good melt, stable feeding, no warpage, no clogging of nozzles, etc. These characteristics ensure its stable operation..
  • 3D Printer Filament Harmless：PLA Filament is made of a biological material extracted and purified from corn. It has no Bubbles, and harmless to humans. It will not harm the health of you and your family when you work..
  • 3D Printer Filament Bundle First Choice： The pla material is very safe and only has a small odor. It has strong layer adhesion, good melt and smooth feeding. It is your first choice whether considering safety factors or practical aspects..
  • PLA Filament 1.75MM Bundle Multiple colors: The colors of this combination are diverse and beautiful. There are five color-White, Black, blue, Purple and Red, included in the package. You can use them to print models with different colors..
Check Stock

Kywoo Tycoon Slim 3D Printer with Auto Leveling Direct Drive Extruder Resume Printing Function and Dual Z-axis Linear Rail Silent Motherboard Touch Screen Printing Size 9.4x9.4x11.8 inch

  • 【Excellent performance】 Kywoo Tycoon Slim features a linear X-axis guide design, dual Z-axes and gantry frame for 30% more accuracy compared to....
  • 【Automatic leveling sensor and 32-bit motherboard with silent TMC 2209】. Kywoo Touch, developed in-house, is user-friendly, smart and time-saving.....
  • 【Integrated Extruder Kit and Direct Drive Extrusion】With the direct drive extruder, Tycoon Slim 3D printer provides smooth feeding, which is....
  • 【Smart Filament Sensor and HD Touch Screen】Whenever there is a possibility of an incident such as filament leakage or breakage, the smart sensor....
  • 【Safe and stable power supply and warranty】350W switching power supply better protects your prints from short circuit, overload voltage or low....
Check Stock

3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board

  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing..
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing..
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet..
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard..
  • Used with other motherboards: The material detection module uses the level tra....
Check Stock

ERYONE Filament PLA 1.75 mm, Special 3D Printing PLA Filament 1.75 mm for 3D Printers and 3D Pens,+/-0.03mm 1kg (2.2lbs)/Spool,Marble

  • 003cul003e 003cli003e【High Quality PLA Filaments】Special 1.75mm PLA filament is mainly made of PLA raw material and adding a certain proportion of special materials.8 Colors for you to choose from:glow green, marble, dark wood,light wood, metallic iron,metallic copper,metallic stainless steel and metallic tungsten.Perfect for anyone who needs to print special effects!003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【High Accuracy】1.75mm Filament diameter tolerance +/- 0.03 mm, ensuring easy feeding of PLA Filament for excellent surface quality and high precision in every print.003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【Strong Layer Adhesion】Special PLA 3D filaments has the characteristics of good ductility, strong toughness,no clogging,no warping,no bubbles,stable continuous feeding,no clogging of nozzles or extruders.003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【Sealed Packaging】The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign matter.perfect winded filament pla,100% Tangle-Free before Unopened, no stringing and warping.003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【High Compatibility】Compatible with 99% FDM 3D printers and 3D pens that use 1.75MM filament.Made from starch r....
Check Stock

XYZPrinting da Vinci Jr. 1.0A Pro 3D Printer Open Filament 3D Printing Build Size: 6.9" x 6.9" x 6.9" Fully Enclosed

  • Large Print Bed: With a maximum build area of 6.9" x 6.9" x 6.9" (175 x 175 x 175 mm) the printing possibilities are HUGE!.
  • Advanced Extruder Technology: Choose from a wide range of materials such as PLA, PETG, Tough PLA, XYZcarbon fiber*, and Metallic PLA* filament..
  • Auto Feeding: Easily install filament with the auto feeding function to ensure filament is loaded correctly and ready for use..
  • Frustration Free Calibration: The da Vinci 1.0 A Pro has a 9 point auto-calibration system to ensure easy setup and maintenance..
  • Advanced Motor Technology: Four motors increase the speed and accuracy of your prints..
Check Stock

Flashforge 3D Printer Parts Flexible Build Plate Kit for Adventurer 3 Series Upgraded Print Platform Fit AD3C/AD3 Lite/AD3

  • Flashforge Adventurer 3 Lite, as a stripped-down version of Adventurer 3, remains main functions, making it a super cost-effective auto leveling 3d....
  • Out of the box,auto leveling, removable and heating bed,much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG....
  • Filament auto feeding: put the end of Filament in, the 3d printing machine will auto feeding. And Super quiet printing: < 45 decibels noise level.
  • Cloud storage & online slicer: Share and download files on the cloud.
  • Slice models and transmit sliced files to the 3D printer via Wifi connection.
  • Flashforge 3d printer Adventurer 3 Lite,12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Check Stock

ZIRO Carbon Fiber PLA Filament 1.75mm,3D Printer Filament Carbon Fiber PLA 1.75mm 0.8KG Spool - Black

  • 3D Printer Filament Spool Holder Material:High Quality Aluminum alloy.
  • Surface Treatment: anodizing,long service life,fine workmanship.
  • Install:Easy and quick installation, Use 2pcs M4 screws to fix, stable and not loose.
  • Filament Holder Suitable for 0.5kg or 1kg and below ABS/PLA 1.75mm 3.0mm 3D printer filament.
  • Application Scope: Suit for 2020 aluminum frame type 3D printer, Ender 3 series, CR-10 series.
  • Package Content: 1 Kit 3D printer Rotate Spool filament holder with base, 2pcs M4 T Nuts, 2pcs M4x10mm screws, 2pcs M3x12mm screws, 2pcs Allen key.
  • Features:The filament disk rotates concentrically to make feeding filament more smoothly.
  • The Filament in the image are only used with the photo scene, the actual shipping products do not contain Filament, please note, thank you.
Check Stock