Reviews Auto Diode - BestBuyersPro.com

UNI-T UTG962 Function Generator, UTD2152CEX Oscilloscope, UTP1306 Switching DC Power Supply

UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one..
Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer..
Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance..
True RMS Multimeter for Voltage, Current, Resistance, Capacitance, Duty Cycle & Diode test. Double Insulated and Protected against Overcharges..
Simplify operation, convenient to use. Portable, light weight. Automatic Sleep Mode, Automatic Power Off, Automatic Range, Automatic Polarity Indication, Automatic Over-range Indication..

Measures up to 600 volts alternating current and 10A alternating current for electrical installation home appliance repairs.
Measures up to 600 volts direct current and 10A direct current for auto marine and electronic installations or repairs.
Audible tone sounds below 30 ohms to check proper wiring and shorts.
Resistance is up to 2 megaohm for household and auto electrical wiring testing and repair.
Diode test for electronic and electrical testing.

EASY TO USE: You quickly and easily KNOW which fuse is BLOWN thanks to the illuminating LED indicator..
GROUP: Smart GLOW FUSE / CARTRIDGE / TALL / STANDARD / Type. Replacement non-diode automotive fuses ATC/ATO..
QUALITY MATERIALS: HEAT RESISTANT PLASTIC - WILL NOT MELT. High-grade thermosetting plastic. Won’t ruin the car’s fuse box. Zinc alloy terminals for corrosion resistance and enhanced conductivity..
OEM INDUSTRY STANDARD: Color coding. Size complies with OEM standard SAEJ2741, UL, EU RoHS, and REACH. Bright diode inside the fuse. Suitable for Car, Auto, Motorcycle, Truck, SUV, Boat, Marine, RV..

AC/dc 1000V/10a 200Khz 200Uf 40Mohm relative measurement hfe diode check continuity.
LED/sound warning when incorrect banana jacks are used relative to function switch setting.
Auto and manual ranging with relative measurement (all ranges except frequency).
Auto power off (could be disabled) & blue LED back-lit lcd display.

Auto and Manual Ranging with Relative measurement (all ranges except frequency).
Auto power off (could be disabled) & Blue LED Back-lit LCD display.
AC/DC 1000V/10A 200KHz 200uF 40Mohm Relative Measurement hFE Diode Check Continuity.
LED / Sound Warning when incorrect banana jacks are used relative to function switch setting.
All range fused (resettable) with 1 Year Warranty.

Test ranges:Inductors, capacitors , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube, ESR, Resistance, Adjustable potentiometer.
Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage..
High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal).
128*64 big Backlight LCD display,only 2mA when stand by..
Auto power off function to avoid unnecessary waste, saving battery power, improved battery life.

AC/DC 1000V/10A 200KHz 200uF 40Mohm Relative Measurement hFE Diode Check Continuity.
LED / Sound Warning when incorrect banana jacks are used relative to function switch setting.
Auto and Manual Ranging with Relative measurement (all ranges except frequency).
All range fused (resettable) with 1 Year Warranty.
Auto power off (could be disabled) & Blue LED Back-lit LCD display.

▶►▷【MULTIFUNCTIONAL TEST】: Micro-controller using 8MHz external crystal, better measurement accuracy. Automatically detect NPN, PNP bipolar transistors, N-channel and P-channel MOS FET, JFET, diodes, dual diode, thyristor small power unidirectional and bidirectional thyristor..
▶►▷【AUTO SHUT-DOWN FUNCTION】: Our advanced electronic transistor tester with automatic shutdown and manual shut-down function.use accessories, more convenient and efficient to complete your project. One button operation, automatic shutdown with only 20nA shutdown current..
▶►▷【STABLE PERFORMANCE】: Forward voltage drop measurements of diodes, LEDs and transistor base-emitter junctions. Can be in correct order and the diode symbol display two diodes, and gives the diode forward voltage. Each test takes about two seconds, with only large capacitors and inductance measurements taking longer..
▶►▷【FINE WORKMANSHIP】: Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. Fine workmanship and good performance. Durable and easy to use..
▶►▷【WARRANTY & GUARANTEE】: 6 month extended warranty and 24/7 friend....

【Wild Application】:1.8" Full Color Display,Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, Mega328,BJT, resistor and capacitor and various electric transistor testing..
【Built-in Battery】:Built-in lithium battery, convenient and effective, the indicator light shows green when fully charged. Warm Reminder: The charging input voltage is 4.5V, please do not use it under overpressure, otherwise the tester will be damaged..
【Add IR Decoder】: After the component detection is completed, the infrared remote control at the tester "IR" test hole, press the remote control key, the tester will be display the user code & data code and the corresponding infrared waveform after the successful decoding.
【Auto shut-down Function】: Our advanced electronic transistor tester owns auto shut-down function.Convenient and practical..
【Extra accessories】: use accessories, more convenient and efficient to complete your project(Please refer "Product guides and documents"to get user manual).

This LCR-T7 Transistor Tester Built-in high capacity rechargeable lithium ion battery. Lithium ion battery voltage detection..
Used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc.
Automatic detection of zener diode 0.01-30V, self test with automatic calibration.
The data code and infrared waveform will be displayed,when the detector is successfully decoded(tips:After detection, align the infrared remote control with the "IR" light, then press the button in the remote control).
One key operation. Auto power off (timeout settable)..