Reviews Aust Plug Board Adaptor

LeTaoXing DC 5V 4A Switching Power Supply Adapter 20W 5V/4A for Raspberry Pi X828/X825/X820 SATA Expansion Board/ X750/ X720/ X700 UPS/ X735 Power Management Board/Jetson Nano/T300/T200/T100

  • Output: 5V DC, 4A Max.Cord Length: 3.6ft, Connector size: 5.5mm x 2.5mm (Compatible plug 5.5mmx2.1mm Plug size).
  • It perfect replacement for 1A / 2A / 2.5A / 3A / 3.5A as amperage isnt forced. (If your previous Adaptor was less than 4A then this will be a perfect replacement as amperage is NOT Forced)..
  • Important Note: The output voltage is between 5.2V~5.5V, which is about 5%~10% higher than the marked 5V, this is the normal output range voltage designed by power professional technicians when the power supply is not connected to electrical appliances. Higher than the 5% to 10% Voltage overvoltage can't blow up the board you are powering with it, The voltage of the power supply will be reduced to 5V when it is connected to the appliance..
  • Compatible with X750/ X705/ X725/ X700/ X720 UPS, X735 power management board and NVIDIA Jetson Nano board, T300, T200, T100 and ROCK64 board,it can also be used with WeBoost connect RV 65 850012 , Odroid XU4,Odroid XU4Q..
  • Tips: Various devices have different plugs size, the voltage and DC plug polarity are internal positive (+) external negative (-), the required current should be less than or equal to this product, please pay attention to the choice, avoid plugs or parameter selection errors can not ....
Check Stock

BloomGrow 110V / 120V to 220V / 240V Plug Adapter Electrical Converter for US (1 PC)

  • BloomGrow 1 PC 110V / 120V to 220V / 240V Plug Adapter.
  • The 120 to 240V adapter adapts a 120V 5-15P IEC male plug to have a 6-15P male plug pattern..
  • This adaptor should ONLY be used on electrical equipment which is rated for 220/240V use..
  • This is a plug adaptor and NOT a voltage converter..
  • If you have any question about our products and service, please feel free to contact us, we will reply within 24 hours.
Check Stock

Softalk 04328 Phone Cord Connector Landline Telephone Accessory

  • Two Way Telephone Splitter: Specially designed 2 way RJ11 6P4C splitter lets you plug in two phone devices to one wall jack. It allows two telephones or modems with US plug to connect to a single US telephone socket..
  • Easy to Use: Uvital Telephone Splitter is very simple to use. You just plug the adaptor into the RJ11 phone socket and plug your RJ11 cables (not supplied) into the adaptor. One end is 6P4C male plug and the other end is two 6P4C RJ11 sockets..
  • Convenient and Simple: They Can use not only a telephone but FAX machine with your VOIP telephony unit..
  • Durable Material:Uvital telephone adapter is made of durable plastic material..
  • Package Includes: 2 x RJ11 Telephone Splitter.
  • worry-free 18-month replacement warranty,12-hour Customer-friendly Support Service..
Check Stock

Ridgid VT2525 2.5 Inch Muffler / Diffuser Accessory for Ridgid Wet / Dry Vacuums Adaptor Included

  • REDUCE VACUUM NOISE: Plug this into the blowing port of your Ridgid vacuums, and you’ll have a more comfortable time on the job as the noise is cut....
  • INCLUDED ADAPTOR: This will help you plug this tool into different Ridgid vacuums with a 2.5 inch port.
  • EASY INSTALLATION: All you need to do is connect the accessory to the adaptor, and push the adaptor into the Ridgid exhaust port of your choosing, and....
  • VACUUM SUCTION NOT REDUCED: You don’t have to worry about your vacuum’s power being reduced, as long as your hose is 20 feet or longer, as this....
Check Stock

gomompa Bam Margera Heartagram Him Hub Bar Advertising LED Light Sign P562B

  • Approximately size: W 12"x H 8.75" (W 300mm x H 220mm), 100% Engraving (no laser, no paint) Carved with the latest 3D..
  • Made of highest quality clear acrylic plastic and lighting..
  • Suitable for 110v~240v power, provide a plug with voltage based on your country's standard: US 2 pin plug.
  • With a metal chain for hanging up anywhere you like..
Check Stock

Phone Splitter 1 to 2 Landline Converter Telephone Wall Jack Adapter for Landline and Fax machine with Rj11 Coupler（2pcs）

  • [Type] - 6P4C RJ11 Socket to RJ11 Plug, 1 Male plug to 2 female dual socket.
  • [How to Use] - You just plug the adaptor into the RJ11 phone socket and plug your RJ11 cables (not supplied) into the adaptor.
  • [Application] - They can use not only telephone but FAX machine with your Ooma VOIP telephony unit.
  • [Durable Material] - Telephone adapter is made of durable plastic materials.
  • [Package Includes] - Two packs of phone jack splitter and one 6P4C coupler.
Check Stock

10 Foot Long Dust Collection Power Tool Hose Kit for Multiple Types/Brands of Power Tools and Work Shop Vacuums with Threaded Fittings

  • ...th popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
  • The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!.
  • Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 1 each small flexible rubber thread-on fitting, 1 each large flexible rubber thread-on fitting and 1 each Plug-in Adaptor shop vacuum that will allow you to connect the hose to most commercial or residential workshop vacuum ports..
  • IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS: Before placing an order, please check the inner and outer (I.D. and O.D.) diameter of your workshop vacuum ports and power tool ports to make sure the hose and fittings will properly fit and work for your needs. THE I.D. AND O.D. ON THE RUBBER END FITTINGS AND HOSE ARE APPROXIMATE SIZES AND MAY SLIGHTLY VARY..
Check Stock

10 Foot Long Dust Collection Power Tool Hose Kit with 6 Threaded Fittings/Attachments for Multiple Types/Brands of Power Tools and Work Shop Vacuums

  • ...th popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
  • The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!.
  • Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 2 each small flexible rubber thread-on fitting, 2 each large flexible rubber thread-on fitting and 2 each Plug-in Adaptor shop vacuum that will allow you to connect the hose to most commercial or residential workshop vacuum ports..
  • IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS: Before placing an order, please check the inner and outer (I.D. and O.D.) diameter of your workshop vacuum ports and power tool ports to make sure the hose and fittings will properly fit and work for your needs. THE I.D. AND O.D. ON THE RUBBER END FITTINGS AND HOSE ARE APPROXIMATE SIZES AND MAY SLIGHTLY VARY..
Check Stock

HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)

  • ...t works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
  • This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
  • Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
  • If you have any problems, please contact with us directly. Simply e-mail us the problem, the solution will be provided in the least time..
Check Stock

Hudson Pro 23005 Dual Power Deflator Inflator Teal

  • The Hudson Dual Power inflator/deflator delivers heavy duty performance in a compact and portable design.
  • Plug it into your vehicle power outlet or your wall outlet, turn on, and you're ready to use!.
  • The inflator/deflator features an LED light and digital pressure gauge.
  • ball adaptor, tire valve adaptor, small inflatable adaptor.
  • hose storage around the handle and under the unit.
Check Stock