Reviews Audio Power Filter

Kenwood KAC-511 Class D Digital Mono Amplifier with Variable Low-Pass Crossover – Black

  • 500W total power RMS rating of 500W x 1 @ 2 ohms, for robust audio. 300 Watts x 1 @ 4 Ohm.
  • Variable low-pass-filter crossover Lets you easily adjust the audio frequency from 50Hz to 200Hz for flexible sonic customization..
  • 4 ohms impedance Conducts power evenly to keep the speaker at an appropriate level..
  • 100dB signal-to-noise ratio Offers crisp audio..
  • Class D circuitry Ensures reliable power handling..
Check Stock

Polk Audio MM 1242 SVC 12 1260 Watt Car/Marine Subwoofer Sub+Amplifier+Amp Kit

  • ...atts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz.
  • High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%. Frequency Response: 10Hz - 40KHz. Damping Factor: > 200 @ 100Hz. 50 Amp Maxi Fuse.
Check Stock

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • ...: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Power Supply Soft Turn on Circuit Frequency Response: 20Hz~250Hz Signal to Noise Ratio: 85dB.
  • Damping Factor: 150< Low Pass Filter (Variable): 50Hz~220hz Subsonic Filter: Off~50Hz Remote Bass Knob & Wire Included 1/0 Gauge Power and Ground Terminals Working Voltage: 8.5V-14.4V Fuse Rating: 200 Amp Dimensions: 17" (Length) x 6.3" (Width) x 2.2" (Height).
Check Stock

Audio Technica AT2035 Cardioid Condenser Microphone for Studio, Podcasting & Streaming Bundle with Blucoil Portable USB Audio Interface for Windows and Mac, Boom Arm Plus Pop Filter, and 10' XLR Cable

  • DELIVERS DETAILED AUDIO & REDUCED NOISE - The Audio Technica AT2035 Microphone has a large diaphragm that produces pleasant, natural sound and 12dB low noise. Its cardioid polar pattern isolates ambient noise while the 80Hz high-pass filter minimizes low rumbles..
  • WORKS WITH VOCALS & LOUD INSTRUMENTS - The selectable 10dB attenuation pad enables the mic to handle high SPL signals up to 158dB without overloading. You can use AT2035 for live recordings and home/studio applications..
  • DELIVERS CRISP AUDIO RECORDING - Create high-quality audio content with the Blucoil USB Audio Interface. It provides 24-bit/48kHz resolution and 48V phantom power. Plug AT2035 or an instrument in the interface and record directly on a Mac/Windows PC..
  • OFFERS DIRECT MONITORING - Turn on the Direct Monitor switch and listen to the mic/instrument input signal in real-time without any latency via headphones. The Blucoil Interface also offers 1/4" outputs if you wish to monitor via studio monitors and speakers..
  • INCLUDES - Audio Technica AT2035 Cardioid Condenser Microphone for Studio, Podcasting & Streaming, XLR Output, Includes Custom Shock Mount & 5/8"-27 to 3/8"-16 Threaded Adapter. Blucoil Portable USB Audio Interface with 48V Phantom Power for Windows and Mac.
Check Stock

Audio Mixer Bluetooth G-MARK Professional Mixer Usb Interface Sound Board Console System 16 Channel Digital MP3 Computer Input 48V Phantom Power Stereo DJ 24-Bit SPX Effects Mixing Console

  • ...l instruments to avoid clipping that can significantly affect mixing distortion..
  • Bluetooth mixer - Hassle and cable-free audio streaming ability directly to the console unit. This audio mixer can wirelessly stream music tunes from Android Smart Phone or PC with mixing board from Pandora or Spotify..
  • EQ and high-pass filter, precise tuning tone, the effective means is a reliable balance operation. The G-MARK MG16MP3 mixing console leverages the rich experience of audio equipment with a three-band equalizer on each mono channel, thus controlling the sound. The high-pass filter eliminates unneeded, low-frequency noise, resulting in a smooth, clear mix..
  • Audio interface mixer are rugged, impact-resistant powder coated metal chassis. Wavy rounded design facilitates rapid cooling, internal design, the power supply module independent of the analog circuit, which will help reduce the probability of noise, while increasing the life of internal components. Knob controller design all in the chassis surface, so from the chassis itself to the internal circuit board and the parts below, will not be any collision and extrusion..
Check Stock

SFB-1500D - Sundown Audio Monoblock 1750w RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Sundown Audio SIA-2500D Monoblock 2500W RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Sundown Audio SFB-3000D 3000W RMS Class D Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Audio Technica AT2020 Condenser Studio Microphone Bundle with Pop Filter and XLR Cable

  • Specially Priced Package includes Audio Technica AT2020 with all items as packaged by Audio Technica, PLUS:.
  • (1) Pop Filter to filter out plosives while recording vocals or speech.
  • (1) 20 ft. Balanced XLR Microphone cable for connecting the microphone to a recording interface or mixer..
  • Reminder: This microphone is NOT equipped with USB and will require a microphone preamp with 48v Phantom Power. For the USB version of this mic, see....
  • Sonic Sense One-Year Extended Warranty Adds One Year to Manufacturer's Warranty.
Check Stock

Rockville Krypton F1 1600w Peak / 400w RMS 4 Channel Amplifier Car Audio Amp

  • Rockville KRYPTON F1 1600w Peak / 400w Dyno-Certified RMS 4 Channel Amplifier Car Audio Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 100 Watts x 4 Channels 003c1% THD+N. 4 Ohm: 70 Watts x 4 Channels 003c1% THD+N..
  • 4 Ohm Bridged: 200 Watts x 2 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 400 Watts x 4 Channels. 4 Ohm: 280 Watts x 4 Channels. 4 Ohm Bridged: 800 Watts x 2 Channels..
  • All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. Digital Voltage Display on Amp. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry..
  • Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob). Adjustable Low Pass Filter: 40Hz – 4KHz. Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter). Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz. 2CH/4CH Input Mode Switch. 8 Volt Preamp Circuitry.
Check Stock