Reviews Atx Switching Power Supplies

(2-Pack) COMeap Motherboard ATX CPU 8 Pin (4+4) Male to Female Extension Cable for Power Supply PSUs 9.5-inch(24cm)

『Solution』Providing a convenient solution for extending the connection from power supply to motherboard（Note: It doesn't work with graphic card）.
『CPU 8P(4+4) M-FM』Connector A: ATX 12V 8 pin (4+4) male (Detachable CPU 8 pin(4+4) end could be used as EPS ATX 8 pin or P4 ATX 4 pin by sliding on/off the 4 pin.), connector B: ATX 12V 8 pin female ( NOTE: it is CPU 8 pin, not pci-e 8 pin).
『Compatibility』Compatible with power supplies with ATX 8 pin male port output & motherboards with ATX 4 pin or ATX 8 pin port.
(This cable is a common power supply extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output.).
『Parameter』Length(including connectors):9.5-inch(24cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Max power rating: 500W, Quantity: 2pcs, Self-adhesive tape*1pcs.
『Note』This cable is a common power supply extension cable, not converted cable. It does not work with GPU. If you use it to connect your GPU, it will definitely burn or damage the GPU and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure if it supports your power supply.

1 x power 24 pin ATX with detachable 4 pin section.
Features: Overvoltage protection, overpower protection.
Complies with FCC part 15J class B 115Vac Operation and CISPR22 230Vac Operation. Logisys PS480D 20/24 pin Switching 480W Power Supply.

24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header. With latching button switch to control ATX power supply output ON/OFF..
Total 16 LEDs, it is convenient for you to diagnose the functions of all pins except COM/GND, therefore, if the output of any one wire of your ATX power supply is faulty, it can be seen at a glance..
High quality screw terminal blocks. Each terminal position support current output maximum 10 Amp. Pitch 5.0mm/0.197 inch, Wire range 26AWG to 12AWG / 2.5mm square..
Packing list: 1x Diagnostic breakout board, 4x Screws, 4x Nylon spacers..
Special Note: The PS_ON LED lights up when the output is OFF and goes out when the output is ON, this is just the opposite of the indication status of other LEDs. Since many new ATX power supplies no longer provide output -5V, the NC/-V LED will not light up when connected to this type ATX power supply..

【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..

Connector 1: standard ATX CPU 8 pin EPS-12V female (connect to power supply 8 pin EPS).
Connector 2 : EPS-12V 8(4+4) pin male (connect to Motherboard 8(4+4) pin EPS).
This cable is compatible with ALL power supplies !!!.
EPS 8 Pin Power Extension Cable features one ATX CPU 8 Pin 12V female connector and one 8(4+4) Pin ATX 12V male connector, extending your cable length from the power supply to the CPU motherboard by 32-inches.
Length :32 inshes, Gauge:standard 18 AWG - UL1007 , Max Rated power : 500W.

size:365*282*130 Four hard disks can be installed in any 2.5 inch 3.5 inch solid-state machinery..
Supporting integrated water-cooled installation (120 140 240 280 water-cooled drainage).
1 x Stainless steel switching power supply wire.

80 Plus Platinum: Runs cooler and uses less power than less efficient power supplies.
Fully Modular: Allows user to only use the cables they need for a cleaner looking build with better airflow.
10-year warranty: Backed by Corsair's legendary technical support and customer service.
135mm FDB fan with Zero RPM mode: Virtually silent operation at low loads,+12V Rail Switch: Gives the user the choice of a single +12V rail or....
ATX12V v2.4 and EPS 2.92 standards and is backward compatible with ATX12V 2.2, 2.31 and ATX12V 2.01 systems.

Converts any standard ATX power supply to work with your 10-Pin motherboard.
24-Pin port connects to ATX Power Supply, 10-Pin port connects to motherboard.
Material: 1007-18AWG, braided Sleeves for easy cable management. Length: 30cm, 12in, 18AWG.
NOTE: Some power supplies will still be on even when computer is shut down. In this case, you would need to turn off using the main power switch (back of your computer)..

80 Plus Platinum: Runs cooler and uses less power than less efficient power supplies.
Fully Modular: Allows user to only use the cables they need for a cleaner looking build with better airflow.
10-year warranty: Backed by Corsair's legendary technical support and customer service.
135mm FDB fan with Zero RPM mode: Virtually silent operation at low loads,+12V Rail Switch: Gives the user the choice of a single +12V rail or....
ATX12V v2.4 and EPS 2.92 standards and is backward compatible with ATX12V 2.2, 2.31 and ATX12V 2.01 systems.

Connector 1: standard ATX CPU 8 pin EPS-12V female (connect to power supply 8 pin EPS).
Connector 2 : EPS-12V 8(4+4) pin male (connect to Motherboard 8(4+4) pin EPS).
This cable is compatible with ALL power supplies !!!.
EPS 8 Pin Power Extension Cable features one ATX CPU 8 Pin 12V female connector and one 8(4+4) Pin ATX 12V male connector, extending your cable length from the power supply to the CPU motherboard by 12-inches ( This cable NOT pci-e 8 pin ).
Length :12 inshes, Gauge:standard 18 AWG - UL1007 , Max power rating: 500W.