Reviews Atx Backplane

StarTech.com 4 Bay 3.5 SATA SAS Backplane - 3 x 5.25in Bays - Trayless Mobile Rack - SATA Backplane - Removable Hard Drive Bay - HDD Rack HSB43SATSASB

  • Hot swap up to four 3.5" SATA or SAS hard drives using three 5.25" bays.
  • 4 Bay 3.5" SATA SAS Backplane with trayless design.
  • Hot Swap Mobile Rack for three 5.25" bays, supports SAS I/II and SATA I/II/III (up to 6Gbps).
  • 4 bay mobile rack with durable plastic and aluminum construction provides a cost-effective solution for drive maintenance and hot swapping drives....
  • 2 fans and venting to optimize heat dissipation / HDD Rack/ SAS Backplane/ SATA Backplane / hard drive tray / 4-bay SAS/SATA backplane / Hard drive....
Check Stock

StarTech.com 4-Bay Mobile Rack Backplane - Trayless Hot Swap Mobile Rack Backplane for 3.5in SAS II/SATA III - 6 Gbps HDD HSB4SATSASBA

  • INCREASED PRODUCTIVITY: The mobile rack backplane for 3.5in SAS II/SATA III turns three 5.25" bays into a hot-swappable interface for up to four....
  • MAXIMUM COMPATIBILITY: The hot swap backplane for 3.5in SAS II/SATA III can interface with SATA I/II/III and SAS I/II hard drives -- an ideal solution....
  • EASY TO USE: For a quick and secure method of installing and removing drives, the trayless hot swap mobile rack backplane features ejection levers and....
  • MAINTAIN OPTIMAL TEMPERATURE: To help prevent drive failure, the aluminum mobile rack backplane provides drive cooling with a built-in fan and....
  • Connect and hot swap four 3.5in SATA III or SAS II hard drives to your computer system in three 5.25” bays, with support for SATA 6 Gbps.
Check Stock

TAYCCEU ATX CPU 8 Pin Female to 8 Pin (4+4) Male Power Extension Cable 2-Pack for Motherboard CPU Power Supply PSUs, 12 inch

  • Motherboard ATX CPU 8 Pin Extension Cable. Help you extend the connection from power supply to motherboard..
  • Connector A: ATX CPU 12V 8 pin female ( NOTE: it is CPU 8 pin, not pci-e 8 pin).
  • Connector B: ATX 12V 8 pin (4+4) male (Detachable CPU 8 pin(4+4) end could be used as EPS ATX 8 pin or P4 ATX 4 pin by sliding on/off the 4 pin.).
  • Compatible with power supplies with ATX 8 pin male port output & motherboards with ATX 4 pin or ATX 8 pin port.
  • (This cable is a common power supply extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output.).
  • Length:12inch(30cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Max power rating: 500W, Quantity: 2pcs.
  • Warning: This cable is used to extend the connection from power supply to motherboard.It does not work with GPU. If you use it to connect your GPU, it will definitely burn or damage the GPU and we won’t take any responsibility for wrongly using or installing..
Check Stock

Alphacool Eiswolf 2 360mm AIO GPU Cooler with Backplate RX 6800/6900 XT Nitro+

  • Active cooling backplate：The newly developed and designed graphics card backplane water block covers the entire back of the PCB, which effectively....
  • Jet type micro channel structure:The 0.5MM gap has strong passability, even when using color powder or nano-silver water-cooling liquid, it is not....
  • T2 high-purity copper plate: The heat-absorbing plate of the water block is made of the national standard T2 high-purity purple plate, the base....
  • Suggested water way: The new bridge module is used for Unicom's graphics card water cooling head and backplane water cooling head. It is small in size....
  • Heat dissipation cooling water-cooled head backplate: The water-cooled head is equipped with an exclusive backplane of high-quality electroplated....
Check Stock

Cable Matters Internal Mini SAS to Mini SAS Cable (Mini-SAS to Mini-SAS Cable) 1.6 Feet, 0.5m

  • This is Reversed Cable, 4x7Pin Sata is host, connect to the motherboard or RAID Controller with SATA ports. Mini SAS 36 (SFF-8087) is the target, connect to the Backplane with MINI-SAS port.
  • Before you buy this cable, please make sure the Mini SAS 36 (SFF-8087) on your backplane. If the Mini SAS 36 (SFF-8087) on your motherboard or RAID Controller, this cable will not work with them.
  • Mini SAS 36 (SFF-8087) connect to the Backplane, 4 x SATA connect to 4 Controller.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Check Stock

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

  • Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
  • Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
  • Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
  • Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
  • This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
  • Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).
Check Stock

Lian Li O11 AIR Mini White ATX Case - O11AMW

  • Motherboard: E-ATX (Max 280 mm wide)/ ATX/ Micro-ATX/ Mini-ITX.
  • Material: Aluminum Panel, Mesh Panel & Tempered Glass.
  • Drive: 6 X 2.5 SSD or 2 X 2.5 SSD + 4 X 3.5 HDD.
Check Stock

DIY ITX MATX ATX Computer Open Air Case, Aluminum Open Frame Computer Case, PC Test Bench Vertical Motherboard Chassis DIY Kit(Blue Black)

  • Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
  • Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
  • DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
  • ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
  • Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..
Check Stock

OCESTORE 24Pin ATX Switch Pico PSU Car Auto Mini ITX High Power Supply Module DC 12V 160W ATX Power Switch Cable

  • 【OPTIMAL PERFORMANCE】OCESTORE premium upgrade Atx Power Switch Cable 100% brand newadopts industrial solid capacitor, which is ideal for using in harsh evironment..
  • 【HIGH QUALITY】OCESTORE premium Atx Power Switch Cable is made of high quality material which can use for a long time..
  • 【SUPER IMPORTATNT】OCESTORE Atx Power Switch Cable is 100% mute working Without fan. special for mini-itx and 1U case.Atx Power Switch can reach up to 160W, so it must be accompanied by the power adapter which reach 12V-12.5A..
  • 【OPTIMAL RELIABILITY】High performance with high heat-stand feature, more reliable Atx Power Switch Cable..
  • 【PACKAGE & SERVICE】Package Include: 1 Pcs x Atx Power Switch Cable.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

(2-Pack) COMeap Motherboard ATX CPU 8 Pin (4+4) Male to Female Extension Cable for Power Supply PSUs 9.5-inch(24cm)

  • 『Solution』Providing a convenient solution for extending the connection from power supply to motherboard（Note: It doesn't work with graphic card）.
  • 『CPU 8P(4+4) M-FM』Connector A: ATX 12V 8 pin (4+4) male (Detachable CPU 8 pin(4+4) end could be used as EPS ATX 8 pin or P4 ATX 4 pin by sliding on/off the 4 pin.), connector B: ATX 12V 8 pin female ( NOTE: it is CPU 8 pin, not pci-e 8 pin).
  • 『Compatibility』Compatible with power supplies with ATX 8 pin male port output & motherboards with ATX 4 pin or ATX 8 pin port.
  • (This cable is a common power supply extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output.).
  • 『Parameter』Length(including connectors):9.5-inch(24cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Max power rating: 500W, Quantity: 2pcs, Self-adhesive tape*1pcs.
  • 『Note』This cable is a common power supply extension cable, not converted cable. It does not work with GPU. If you use it to connect your GPU, it will definitely burn or damage the GPU and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure if it supports your power supply.
Check Stock