Reviews Atc Fuses - BestBuyersPro.com

Bussmann NO.44 ATC Blade Fuse Tester/Puller Kit

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32.
Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools.
Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers.
Includes 3 wire plugs to maintain water resistant rating if less than 4 loads are required and 4 write-on circuit labels.
Nests with other ST-Blade Water-Resistant Fuse Blocks and Water-Resistant 100A Bus Bars to reduce wire.
Fuses and circuit breakers sold separately. Storeage for spare fuse and fastener in cover.
Not ABYC compliant, not intended for marine applications, use PN 5056100 for marine use.

PACKAGE INCLUDE - MuHize fuses assortment box contains 242PCS commonly used blade fuses type and one fuse clamp. Standard 110PCS (APR, ATC, ATO, ATS): 2A/3A/5A/7.5A/10A/15A/20A/25A/30A/35A/40A - 10PCS of Each, Mini 132PCS (APM, ATM): 2A/3A/5A/7.5A/10A/15A/20A/25A/30A/35A/40A - 12PCS of Each..
GREAT PROTECTION - Terminals are constructed from tin-plated zinc for corrosion resistance and enhanced conductivity. MuHize fuses made of premium materials, fast and precise fusing current to protect your vehicles and electrical devices from a short circuit and overload..
WIDELY USE - MuHize ATC/APR/ATO+ATM mini automotive replacement fuse assortment kit w/A puller are specifically designed for Cars, Trucks, SUVs, Vehicles, ATVs, UTVs, Camper RV, Motorcycles, Fleet, Golf Car, Boat, Snowmobiles, and most general DC applications etc, covering such components as radio, light, turn signals, etc..
EASY INSTALLATION - Color coded with carved amp rating on the top for quick identification, transparent housings for viewing link status and quick detection of a blown fuse. Installation: Turn off the ignition switch, open the fuse box cover, replace the broken fuse..
FREE FUSE PULLER - The fuses puller is included in the mini fuses box, makes replacing the fuse easier and qui....

Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits. Models available with or without a cover.
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit identification.
Fuse blocks with covers include 20 write-on circuit labels. Tin-plated copper buses and fuse clips.
Accepts ring or spade type terminals. Accepts ATO and ATC fast acting blade fuses.

Ignition protected fuse block with screw termination.
Four 30A-200A MIDI/AMI fuses ideal for high-amp circuits including panel feeds, windlasses and stereo amplifiers.
Six 1A-30A ATO/ATC fuses ideal for low-amp circuits including bilge pumps, electronics and lights.

Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud,....
Positive distribution bus with #10-32 stud.
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is....
Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.

Large Capacity Relay Holder – This relay box is 6 slots relay panel design, which includes 5 slots for 5 pin Bosch style relays, 1 slot for RTT7121 4 pin relay..
ATC/ATO Fuse Relay Box – This fuse block with relay is also 6 slots relay holder design for ATC/ATO fuses, which makes the fuse relay become safer when use..
Suitable Terminals – This 12v relay box will also come with terminals for relays and fuses, which will enables you to install and use the fuse and relay box at once..
Top & Bottom Cover – This relay box 12v automotive will come with a top cover and a bottom cover, which makes the relay fuse box become a waterproof relay box..
What you get – 1 x Fuse Relay Block with Top and Bottom Cover, 5 x Bosch Style 5 Pin Relay, 1 x RTT7121 4 pin relay, 16 x Blade Fuses(4 x 10A, 4 x 20A, 4 x 25A, 4 x 30A), 41 x Metallic Terminals, 1 Year Warranty. Feel free to contact us if confused..

Combines an ignition protected fuse block and an integrated connecting plug.
Three 30A-200A MIDI/AMI fuses ideal for high-amp circuits including panel feeds, windlasses and stereo amplifiers.
Four 1A-200A ATO/ATC fuses- ideal for circuits including bilge pumps, alarms and clock memory.
Safe for use on gasoline powered boats, reduces wiring connections and consolidates up to seven fused circuits.