Reviews Asus Itx Motherboard

anidees AI Crystal Cube AR V3 Dual Chamber Tempered Glass EATX/ATX PC Gaming Computer Case, Water-Cooling Ready, Steel Structure, w/ 5 RGB PWM Fans / 2 LED Strips - Black AI-CL-Cube-AR3

• Cube ATX PC Case with Dual Chamber design for better airflow and cable management..
• 5mm Tempered Glass side and front panel , 70% transmittance to show off the system on the side panel , USB2.0x 2, USB3.0x2.
• Motherboard Support E-AT, ATX, m-ATX, mini-ITX , Support Vertical Graphic card. Removable Dust filters in the front, top and bottom included.
• Radiator Support 240/280 mm in the top and front side. Graphic Card Length Max Support 330 mm /13 inches , CPU Cooler Max height 168mm / 6.6 inches.
• Easy to use : the fan hub allow you to control the fan speed and LED mode by remote control or connect to the motherboard, control the fan speed by PWM and light by ASUS Aura Sync (ARGB) , MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion / Fusion 2.0 (5V addressable 3pins header on motherboard)..

DIY ITX MATX ATX Computer Open Air Case, Aluminum Open Frame Computer Case, PC Test Bench Vertical Motherboard Chassis DIY Kit(Blue Black)

• Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
• Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
• DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
• ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
• Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..

JGINYUE H97 Mini ITX Motherboard, White LGA 1150 Motherboard Support Intel i5 i7/Xeon E3 (DDR3/M.2 NVME/M.2/VGA DP HDMI-Compatible/PCIe X16/SATA 6Gb/s/2 Gigabit Ethernet)

• LGA 1150 Mini ITX Motherboard: Equipped with LGA1150 CPU socket, supporting Intel i5/i7 and Xeon E3 series processors..
• Three image transmission interfaces: This mini itx gaming motherboard supports VGA, DP, and HDMI-compatible high-definition high-performance graphics and audio signal display, you will have more choices in configuration..
• Dual M.2 slots: The Intel motherboard with M.2 NVME protocol (support NGFF) slot, transmission power up to 32Gbps. Can support M.2 NGFF card.
• DDR3 dual-channel memory: The LGA 1150 computer motherboard supports dual-channel Non-ECC Unbuffered DDR3, 1600/1333Mhz effective frequency. The maximum memory capacity is 16G..
• Stable power supply: 4-phase power supply CPU stable power supply, all solid-state capacitor design, equipped with 24+8 pin power interface, to ensure the stable operation of the motherboard..

KCMconmey 4 Bay DIY NAS Case, 4 x 2.5/3.5 Tray. Compatible ITX MB Flex PSU. with Front USB 3.0 12cm Chassis Fan Hot Swap Backplane. Network Attached Storage Enclosure.

• [Support Mini ITX Motherboard] ITX Motherboard dimension 6.7*6.7in (17*17cm)..
• [Support Flex Power Supply Unit] Flex PSU dimension 3.21*1.59*5.91in (81.5*40.5*150mm)..
• [Support 1 Single Slot Full Height PCI-e Expansion Card] To add video card or network card or more..
• [Come With 1 Front USB 3.0 or 2.0 Port] 2 in 1 cable only plug one connector to motherboard..
• [Come With 1 12cm Replaceable Fan] Pre-installed 120*120*25mm chassis fan..

Thermaltake Level 20 RS Motherboard Sync ARGB ATX Mid Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1P8-00M1WN-00

• [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans + ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
• [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
• [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off.
• [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
• [WINDOW PSU COVER] – Special ventilated design enhances airflow and hides unsightly cables.
• [2+2+1 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Rack + 2 5" x 2 with HDD Bracket + 2 5"/3 5" x 1 behind MB Tray.
• Supports Mini ITX Micro ATX ATX Motherboard.
• I/O Port - USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
• OUTSTANDING EXPANSION - Max CPU Cooler Height 172mm / Max VGA Length 282mm (With Reservoir) 400mm (Without Reservoir) / Max PSU Length 220mm.
• DIMENSION - 21 8" x 9 5" x 20 6" 27 lbs 3 Year.

S300 - Mini-ITX PC Gaming Case - Front I/O USB 3.0 Type - C Port - SFX Power Supply 100-130mm -Cable Management System - luminum Mini-ITX Motherboard Small Portable PC Case PCIe 3.0 16X Riser Cable

• Size: 12.2 x 5.3 x 7.6 in, 8.1L Portable Handheld Minni Itx Case..
• New features: Front I/O USB3.0 Type-C Port and using pure aluminum wire drawing material, small leather handle on the top..
• MESH Panels: Three-sided MESH panels, Effectively improve the performance of hot and cold air exchange..
• Support SFX power supply: Support 100-130mm SFX/SFX-L power supply,the height limit of CPU fan is 60mm..
• ITX motherboard: 170*170mm specification standard ITX motherboard..

Thermaltake View 51 Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M1WN-00

• [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
• [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via the I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
• [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color) / Radar mode (Red, yellow green Cyan blue White Purple) / Breath mode (8 Colors) / Full Lighted mode/ Single Color mode (7 Colors) / Light Off.
• [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
• [SMART SPACE] – Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management.
• [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket.
• Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard.
• I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
• OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm.
• DIMENSION - 21 65" x 12 4" x 20 67" 32 96 l....

Thermaltake View 51 Snow Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M6WN-00, White

• [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
• [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
• [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off.
• [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
• [SMART SPACE] – Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management.
• [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket.
• Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard.
• I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
• OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm.
• DIMENSION - 21 65" x 12 4" x 20 67" 32 96 lbs 3 Year....

LINKUP - [Active Chip] USB 3.0 (3.1 Gen 2) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter

• Installation Note *** USB power will always be on even when the system is shut down. Please unplug the PC power cable completely for 20 seconds before installation to avoid possible voltage spikes which may damage the chipset on the adapter. This adapter is designed to fit all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket..
• …Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) - USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) - USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector.
• Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2).
• including attach/removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode..
• Recommended to be used with LINKUP - USB-C Type Panel Cable Mount Motherboard Header Extension Adapter (B07THC8ZVF). May not fit ITX motherboard in ....

ASROCK AMD X470 Chip Set Mini – ITX Motherboard Fatal1ty X470 Gaming – ITX/AC