Reviews Astm A519 - BestBuyersPro.com

Duct Insulation, 1-1/2In x 48In x 25 ft.

Price For: Each Material of Construction: Fiberglass Standards: ASTM C-411, ASTM C-1104, ASTM C665, ASTM C-1338, ASTM E-84, UL723, NFPA 90A, CAN/ULC S102-1188, ASTM C1290, ASTM C553, ASTM C1136s Item: Duct Insulation Thickness: 1-1/2" Color: Silver Jacket Material: Foil Scrim Kraft Type: Wrap Width: 48" Temp. Range: -32 to 250 F Density: 3/4 lbs. Approx. R Value: 4.2.
Length: 25' Country of Origin (subject to change): United States.

Advanced Technosynthese lubricant for High Performance/Protection.
Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
Can be mixed with synthetic/mineral oils..
Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..

Price For: Each Material of Construction: Fiberglass Standards: ASTM C-411, ASTM C-1104, ASTM C665, ASTM C-1338, ASTM E-84, UL723, NFPA 90A, CAN/ULC S102-1188, ASTM C1290, ASTM C553, ASTM C1136s Item: Duct Insulation Thickness: 1-1/2" Color: Silver Jacket Material: Foil Scrim Kraft Type: Wrap Width: 48" Temp. Range: -32 to 250 F Density: 3/4 lbs. Approx. R Value: 4.2.
Length: 25' Country of Origin (subject to change): United States.

Steel Safety Toe: Metallic, asymmetrical-shaped toe cap.
Meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1..
Waterproof Membrane: Delivers maximum waterproof protection and blood-borne pathogen resistance.
Blood-borne Pathogen Resistant: Breathable membrane helps protect from diseases caused by blood-borne pathogens.
Rubber Outsole: Heat-resistant, durable rubber compound offers enhanced slip, oil and abrasion resistance..
Electrical Hazard Protection: Provides secondary underfoot protection against live electrical circuits, electrically energized conductors, parts or apparatus.
Meets ASTM F2412-18a, ASTM F2413-18, ASTM F2892-18 and CAN/CSA-Z195-14 standards..

Limited lifetime warranty – exceeds the needs of any final roof covering.
Pre-printed nailing pattern and overlap lines speeds installation.
Roll Length 250 ft., Weight Per Square: 2.8 lbs, Test Method/Compliant Codes: ASTM D-4869, ASTM D-5034, ASTM D-4533, ASTM D-226, ASTM D-779, ICC ESR-4487.

50-year warranty – guaranteed to shed water..
Pre-printed nailing pattern and overlap lines speeds installation..
Test Method/Compliant Codes: ASTM D-4869, ASTM D-5034, ASTM D-226, ASTM D-4533, ASTM D-7349, ICC ESR-4487..

Combines 1lb/sf, 1/8″ thick foil-faced mass loaded vinyl with a 1″ thick Bonded Glass Fiber Blanket Decoupler..
Use as a ceiling tile noise barrier or anywhere that you would install fiberglass insulation and require sound control.
Significantly higher performance than 1 LB MLV. Excellent thermal and acoustical performance, STC rating of 29, R-Value: 4.1.
Fire Rating: Class 1 or A per ASTM E84, ASTM C1338-00, ASTM CM411-05, ASTM C665, ASTM C795, ASTM 1304 and UL723.
Sold in lots of ten 16″ x 30″ pieces.

For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..

Slip-resistant outsole tested according to ASTM F2913-18 to provide superior traction under various surface conditions.
Wide flanged alloy toe cap provides added protection for people who work in hazardous work environments. Meets ASTM F2412-18 & ASTM F2413-18 I/75 and....
Meets ASTM F2412-18 and ASTM F2413-18 Electrostatic Dissipative performance requirements that displace charges of electricity through a walking....
Upper features no-sew construction for a sleek fit and feel.
Adjustable lace closure for a customized fit.

Slip-resistant outsole tested according to ASTM F2913-18 to provide superior traction under various surface conditions.
Wide flanged alloy toe cap provides added protection for people who work in hazardous work environments. Meets ASTM F2412-18 & ASTM F2413-18 I/75 and C/75 impact and compression safety standards.
Meets ASTM F2412-18 and ASTM F2413-18 Electrostatic Dissipative performance requirements that displace charges of electricity through a walking surface thus reducing static electricity hazards.
Upper features no-sew construction for a sleek fit and feel.
Adjustable lace closure for a customized fit.