Reviews Asme Flang

Harrington LB Lever Hoist, Hook Mount, 3/4 Ton Capacity, 10' Lift, 11\ Headroom, 9.6\ Lever Length, 0.9\ Hook Opening

  • Compact manual lever hoist and hook mount with all-steel construction for strength.
  • low headroom for work in small spaces and at any angle.
  • Spring-loaded freewheel facilitates rapid adjustment of load chain with one hand, and helps prevent accidental freewheeling when a load is on the chain.
  • Mechanical brake with two moisture-resistant brake pads, four braking surfaces, and two brake pawls to help ensure reliability.
  • Factory load tested to 125% of rated capacity in accordance with ANSI/ASME requirements.
  • Complies with ANSI/ASME B30.21 and ANSI/ASME HST-3M standards.
Check Stock

Harrington CX003 Mini Hand Chain Hoist, Hook Mount, 1/4 Ton Capacity, 10' Lift, 8.5\ Headroom, 0.8\ Hook Opening

  • Compact manually operated chain hoist and hook mount with aluminum body, steel frame, and low headroom for strength, work in small spaces, and to fit into mobile storage carriers.
  • Low pulling force requirement to facilitate use.
  • Load limiter helps prevent lift operation when load exceeds rated capacity for added safety and to avoid damage.
  • Grade 100 nickel-plated load chain for resistance to corrosion and wear.
  • stainless steel hand chain for resistance to wear.
  • Factory load tested to 125% of rated capacity in accordance with ANSI/ASME B30.16 requirements.
  • built to comply with ANSI/ASME B30.16 and ANSI/ASME HST-2M standards.
Check Stock

Harrington CF Hand Chain Hoist, Hook Mount, 1/2 Ton Capacity, 10' Lift, 12.8\ Headroom, 1.1\ Hook Opening

  • Manually operated chain hoist and hook mount with die-cast aluminum body, heat-treated pinion shaft and load gear, pre-lubricated sealed ball bearings, and precision machined gears for strength, simplified maintenance, and smooth lifting.
  • Load chain made of heat-treated manganese alloy to resist abrasion and minimize chain weight.
  • mount hook and load hook made of forged, heat-treated alloy steel to resist fracture under stress.
  • Load brake with two moisture-resistant brake pads and four braking surfaces to help ensure smooth lifting.
  • Factory load tested to 125% of rated capacity in accordance with ANSI/ASME B30.16 requirements.
  • Complies with ANSI/ASME B30.16 and ANSI/ASME HST-2M standards.
Check Stock

Crescent 10 Pc. 3/8\ Drive Flare Nut Metric Wrench Set - CCFWS1N

  • Manufactured from Crestoloy alloy steel for better strength and longer tool life.
  • Meets or exceeds ANSI and ASME specifications.
  • Off-corner loading design reduces fastener rounding.
  • Nickel Chrome Plated for Long Lasting Finish.
Check Stock

Tempilstik 28043 Surface Temperature Indicator, 500 degrees F (One Indicator)

  • Accurate results are +/- 1 percent of rated temperature.
  • Easy to Use melts at designated temperature for easy visual inspection.
  • Superior quality free of contaminants such as Sulfur, Lead and halogens.
  • Traceable each marked by temperature, lot Number and is NIST traceable.
  • Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.7.
Check Stock

Tempilstik 28012 Surface Temperature Indicator, 200 degrees F (One Indicator)

  • Accurate results are +/- 1 percent of rated temperature.
  • Easy to Use melts at designated temperature for easy visual inspection.
  • Superior quality free of contaminants such as Sulfur, Lead and halogens.
  • Traceable each marked by temperature, lot Number and is NIST traceable.
  • Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.4.
Check Stock

Tempilstik 28006 Surface Temperature Indicator, 150 degrees F (One Indicator)

  • Accurate results are +/- 1 percent of rated temperature.
  • Easy to Use melts at designated temperature for easy visual inspection.
  • Superior quality free of contaminants such as Sulfur, Lead and halogens.
  • Traceable each marked by temperature, lot Number and is NIST traceable.
  • Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.3.
Check Stock

Tempilstik 28051 Surface Temperature Indicator, 800 degrees F (One Indicator)

  • Accurate results are +/- 1 percent of rated temperature.
  • Easy to Use melts at designated temperature for easy visual inspection.
  • Superior quality free of contaminants such as Sulfur, Lead and halogens.
  • Traceable each marked by temperature, lot Number and is NIST traceable.
  • Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.9.
Check Stock

Tempilstik 25067 Surface Temperature Indicator, 1550 degrees F (One Indicator)

  • Accurate results are +/- 1 percent of rated temperature.
  • Easy to Use melts at designated temperature for easy visual inspection.
  • Superior quality free of contaminants such as Sulfur, Lead and halogens.
  • Traceable each marked by temperature, lot Number and is NIST traceable.
  • Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.11.
Check Stock

Tempilstik 28310 Surface Temperature Indicator, 212 degrees F (One Indicator)

  • Accurate results are +/- 1 percent of rated temperature.
  • Easy to Use melts at designated temperature for easy visual inspection.
  • Superior quality free of contaminants such as Sulfur, Lead and halogens.
  • Traceable each marked by temperature, lot Number and is NIST traceable.
  • Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.12.
Check Stock