Reviews Asics Gt 2b

Dilwe RC Car Engine Sound Simulator, Remote Control Car Sound Engine Simulated Module Set with 1 Speaker for 1/10 Vehicle Cars Model(One Speaker)

  • It can be installed in 1/10 remote control car, suitable for 94123.
  • Including ten kinds of sound, suitable for racing car, truck, etc..
  • The sound simulator can be directly attached to the inside of the car body shell, and the mainframe can be attached to the frame or the inside of the shell.
  • Suitable for Flysky gt2, gt2b, gt3c, gt3b, Radiolink rc3s, rc3sAg, futaba. Theoretically, it supports most 2.4G independent receiver.
  • It solves the problem of noise and is equipped with a button to adjust volume.
Check Stock

Globact FlySky FS-BS6 Receiver 2.4Ghz 6CH AFHDS2 for FlySky FS-GT5 RC Car Boat Transmitter

  • Easy to bind and very fast link-up, quick and extremely stable in performance.This is an accessory product for Traxxas HPS HPI RC Car & Boat. If any question, please tell us without hesitation.
  • Ultra-small size and ultra-light weight, effectively save space and reduce item's weight-bearing.
  • Buillt-in gyroscope features automatic recovery of unexpected offsets, suitable for AFHDS2A system transmitter.
  • Compatible with : Flysky GT5 GT2E GT2G FS-i4X FS-i6 FS-i6X FS-i6S FS-TH9A FS-TM10, not compatible: FS-GT2 FS-GT2B FS-GT3B FS-GT3C and other transmitter whose communication protocol is AFHDS, Only compatible with the transmitter with the communication protocol AFHDS 2A..
  • Note: If you encounter the problem of not being able to link for the first time, please choose to re-link. (Steps: Insert the attached code line into the receiver BIND interface and power on the receiver. At this time, the receiver indicator flashes quickly, then press BIND button of the transmitter, and turn on the power of the transmitter at the same time, the indicator of the receiver is always on and the linking is successful).
Check Stock

Flysky 4 Pcs FS-GR3E Receiver 3CH 2.4Ghz Receiver for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S RC Car Boat Transmitter

  • Suit for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S transmitter, great for RC cars/Boats..
  • Only 6.5g in weight and 37.6*22.3*13mm, Ultra-lightweight design..
  • Reliable, interference-free 2.4GHz AFHDS signal operation..
  • Easy to bind and very fast link-up, quick and extremely stable in performance..
Check Stock

2PCS Upgraded Waterproof Flysky FS-GR3E Receiver, RCapture 2.4G 3CH Receiver DC 5V for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S RC Car Boat Transmitter Truck

  • Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S FS-GT3X..
  • New function of waterproof, you could also enjoy your rc world when rainning day..
  • Long range over 1000 yard. Reliable, interference free 2.4GHz AFHDS signal operation..
  • Antenna length: 15cm. Light weight about 7.5g. Easy to bind, very fast link-up, strong signal distance..
  • Package List: 2 X Waterproof Flysky FS-GR3E, 2 X Antenna tube, 2 X Bind plug..
Check Stock

Dilwe Engine Sound Simulator, Throttle Linkage Group 2 Speakers Motor Engine Sound Simulator for 1/10 RC Model Car

  • Suitable for:RC Car Engine Module With built-in memory chip, it will play the sound you used last time.Including ten kinds of sound, suitable for racing car, truck, etc..
  • Easy to Install:RC Engine Sound Simulator can be installed in 1/10 remote control car, suitable for 94123.Practical and convenient in use.Such a practical tool you will need it..
  • Feature:RC Engine Speaker Suitable for Flysky gt2, gt2b, gt3c, gt3b, Radiolink rc3s, rc3sAg, futaba. Theoretically, it supports most 2.4G independent receiver..
  • Function:RC Engine Sound Simulated Module solves the problem of noise and is equipped with a button to adjust volume.Built to meet standard specification, strictly follow factory quality control..
  • Directly Attached to:The RC Car Engine Sound Simulator can be directly attached to the inside of the car body shell, and the mainframe can be attached to the frame or the inside of the shell..
Check Stock

2PCS Flysky Long Range FS-GR3E Receiver, Miuezuth 3CH 2.4Ghz Receiver Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FS-GT3X FS-IT4S Transmitter RC Car Boat Truck

  • Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FS-IT4S FS-GT3X RC Transmitter..
  • Long range over 1000 yard. Reliable, interference free 2.4GHz AFHDS signal operation..
  • Compact size. Antenna length: 15cm. Light weight about 6.5g. The 3CH receiver is very easy to install and bind, fast link-up, strong signal distance..
  • Reliable, interference free 2.4GHz AFHDS signal operation.Quick and extremely stable in performance. NOTE: IT IS NOT WATERPROOF..
  • Package List: 2 X Flysky FS-GR3E, 2 X Antenna tube, 2 X Bind plug..
Check Stock

Engine Sound Simulator, RC Car Engine Sound Simulated Module Set Simulator with Speaker for 1/10 Vehicle Cars Model Simulated Module Set (RC Model Part & Acces)

  • Suitable for:RC Car Engine Module With built-in memory chip, it will play the sound you used last time.Including ten kinds of sound, suitable for racing car, truck, etc..
  • Easy to Install:RC Engine Sound Simulator can be installed in 1/10 remote control car, suitable for 94123.Practical and convenient in use.Such a practical tool you will need it..
  • Feature:RC Engine Speaker Suitable for Flysky gt2, gt2b, gt3c, gt3b, Radiolink rc3s, rc3sAg, futaba. Theoretically, it supports most 2.4G independent receiver..
  • Function:RC Engine Sound Simulated Module solves the problem of noise and is equipped with a button to adjust volume.Built to meet standard specification, strictly follow factory quality control..
  • Directly Attached to:The RC Car Engine Sound Simulator can be directly attached to the inside of the car body shell, and the mainframe can be attached to the frame or the inside of the shell..
Check Stock

RCmall FS-R6B 2.4G 6 Channel Receiver Radio Model Remote Control Receiver for RC Car FS-i10,FS-i8,FS-i6X, FS-i6,S-TH9X,FS-T6,FS-CT6B,FS-T4B, FS-GT2,FS-GT2E,FS-GT2F,FS-GT2G,FS-GT2B,FS-GT3B

  • ✨[FS-R6B 2.4G 6 Channel Receiver] Channel: 6 Channels, Modulation type: GFSK , Frequency: 2.4G , Antenna length : 26mm, Power: Power: 4.0-6 5V ..
  • ✨[ Compatible Model Type ] : Fixed-Wing / Glider / Helicopter / RC Crawler, ect..
  • ✨[Compatible with] Flysky FS-GT2,FS-GT2E,FS-GT2F,FS-GT2G,FS-GT2B,FS-GT3B,FS_GT3C FS-i10 FS-TH9X,FS-T6,FS-CT6B,FS-iT4S transmitter, RC Crawler..
  • ✨[Easy to Bind ] : It is easy to bind. Install the bind plug to BAT position..
  • ✨ [What you get ] 1 X FS FS-R6B 2.4G 6 Channel Receiver.
Check Stock

Gizmovine Remote Control Car with Bluetooth Speaker, 2 Speed Mode RC Car for Boys Girls Kids, Rechargeable Music Toy Vehicles for Home Decoration, 2.4GHz Wireless, HiFi Sound - Green

  • Fit For: It can be installed in Flysky gt2, gt2b, gt3c, gt3b, Radiolink rc3s, rc3sAg, futaba 1/10 remote control car, and suitable for 94123 RC car, theoretically, it can guarantee to meet the original equipment..
  • Function: It supports most 2.4G independent receiver, solves the problem of noise and is equipped with a button to adjust volume..
  • Built-in Memory Chip: Because of the built-in memory chip, it will play the sound you used last time. The sound effect is lifelike and brings you much fun..
  • Installation: The sound simulator can be directly attached to the inside of the car body shell, and the mainframe can be attached to the frame or the inside of the shell..
  • Easy to use: A vast variety of built in sounds for you to choose. It contains ten kinds of sound, suitable for racing car, truck, etc. You can switch according to your vehicle..
Check Stock

Globact Flysky FS-GR3E AFHDS Long Range 2.4G 3CH Receiver for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S Transmitter RC Car Boat (2 Pcs)

  • Reliable, interference free 2.4GHz AFHDS signal operation.Quick and extremely stable in performance.
  • This 3CH receiver is very easy to bind very fast link-up, strong signal distance.
  • Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S Transmitter.
  • Quick and extremely stable in performance for RC cars, Truck, buggy, RC Boat.
  • Note:The factory communication protocol of GR3E receiver is AFHDS . Only when the transmitter communication protocol is AFHDS, it can link to the frequency. If the transmitter communication protocol is AFHDS 2A, you need to adjust the transmitter communication protocol to AFHDS according to the instructions in the manual. Only then can it be paired. Input voltage: 4.0-6.5V DC, this receiver is only suitable for part of the Flysky series Transmitter.
Check Stock