Reviews Anti rattle Hitch Pin

CURT 22325 No-Tool Anti-Rattle Hitch Clamp Tightener for 2-Inch Receiver, Hollow or Solid Shanks

  • QUIETER TOWING. The CURT anti-rattle hitch clamp promotes quiet towing of your trailer by clamping down onto the receiver hitch connection. Warning: Anti-rattle clamp must be used in conjunction with a properly secured hitch pin.
  • EASY TO USE. This easy-to-use anti-rattle hitch tightener requires zero tools for installation. Simply clamp the U-bolt down onto the shank and receiver tube opening and engage the locking lever, Constructed from high-strength steel and lightweight aluminum.
  • VERSTATILE FIT. This anti-rattle device fits virtually any 2-inch receiver tube. It can be used with hollow or solid shank hitch accessories.
  • ADJUSTABLE. To ensure a tight fit over your hitch connection, this hitch clamp is easy to adjust. Simply twist the threaded nut and lever.
  • TOUGH BUILD. This anti-rattle hitch kit is constructed from steel and aluminum, and it comes with a clear coating for lasting corrosion resistance.
Check Stock

Hefty Haul Trailer Hitch Tightener for 1.25" and 2" Hitch Anti Rattle, Heavy Duty Steel, Anti Rattle Hitch Tightener 2 Inch, Trailer Hitch Accessories, Hitch Clamp, Tow Hitch Stabilizer, 1 Pack

  • Compatibility: anti rattle hitch tightener works with Classes III, and IV Hitch Receivers (1.25" and 2"), hitch stabilizer 2 inch. This hitch clamp will keep your trailer hitch from shaking and rattling when you drive down the road..
  • Durable and Heavy-Duty: The rubber coated U-Bolt and .31" thick black powder coated plate with anti-rattling stabilizer enables this to withstand all weather conditions and loads..
  • Perfect Fit: Adjustable fit and high quality materials ensure a quiet and stable towing/hauling experience. Perfect for hitch receivers, hitch racks, hitch anti rattle, anti rattle hitch pin and more..
  • Convenient and Easy Installation: Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place with the included hardware. Trailer hitch accessories..
  • What's Included: Trailer hitch stabilizer with rubber coated U-bolt, tightener plate, 2 lock washers, 2 flat washers, and two nuts with complete instruction..
Check Stock

Hitch Tightener for 1.25' and 2' Hitches Hitch Tightener Anti-Rattle Stabilizer Rust-Free Heavy Duty Lock Down Easy Installation Quiet(with 5/8-Inch Pin Diameter Trailer Hitch Lock)

  • 1.Each order comes with One anti rattle hitch tightener and One Trailer Hitch Lock.
  • 2.Hitch Tightener: Anti-rattle hitch tightener was designed to completely eliminate hitch noise, wobble, rattle and hitch movement for cargo carriers, hitch receiver, trailer ball mounts, bike racks, hitch racks, etc. Enjoy your quiet towing experience..
  • 3.Hitch Tightener: Great ideal for hitchs on trucks, suv's, vans, RV's and trailers. Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on 2.5" or larger hitch).
  • 4.Hitch Tightener: The rubber coated U-Bolt and 0.31" thick black powder coated plate with anti-rattling stabilizer enables this to withstand all weather conditions and loads..
  • 5.Trailer Hitch Lock: trailer hitch lock is made of solid hardened steel, and is not easily broken or rusted. With a 5/8-inch diameter pin, our product fits most Class III & IV hitches with 2 inch receivers.Each lock cylinder is unique and protects your hitch from theft.2 keys are included..
Check Stock

TOPTOW Hitch Extender Fits for 2 inch Receiver 8.5 inch Extension Length Anti-Rattle Bolt with Hitch Pin Kit and Anti Rattle Stabilizer

  • ★Please check the product dimension before purchasing this part. Extender length (hole to hole): 8-1/2". Shank size: 2". Extender receiver size: 2"....
  • ANTI-RATTLE DEVICE: With seperate anti-rattle hitch tightener and bolt on 2 inch receiver, it can eliminate the hitch wobble at the junction of your....
  • HIGH STRENGTH: This 2 inch receiver tube is rated to tow up to 3500/350 lbs GTW/TW.
  • Package: Comes with hitch extender, 5/8" Hitch Pin and Clip and Blue Anti Rattle Hitch Clamp.
  • Black Powder Coating Finish, Enhanced Rust and Corrosion Resistance.
Check Stock

TOPTOW Trailer Hitch Extender Adapter with 6-inch Riser/Drop, 2" Receiver, 2-inch Solid Shank, 10000lbs Capacity, Anti-Rattle Bolt

  • ★Please check the product dimension before purchase. Extender length: 7" or 9". The 2" shank has two pin holes. ★RECEIVER SIZE: This trailer hitch extension riser has 2 inch by 2 inch industry-standard receiver, fits for most 2-inch shank of ball mounts and hitch accessories. ★ Please tightening the anti-rattle bolt after inserting into the 2 inch shank into the receiver. Recommend to use anti-rattle hitch pin or hitch lock for bike racks or cargo carriers..
  • ★HITCH RISER OR DROP HITCH: 6.25 inch drop or rise can be turned up or down to level the towing system..
  • ★ADJUSTABLE LENGTH: 2 pin holes design makes this drop trailer hitch have 2 active length and avoid interfere with the vehicle bumper.
  • ★SOLID RECEIVER SHANK: Gross Towing Weight: 10,000 lbs. Tongue Weight: 400 lbs. Heavy duty for towing trailer, boat, camper, bike rack, cargo carrier and other tow hitches.
  • ★CORROSION RESISTANT: Made of strong steel with a durable black powder coat finish, super corrosion resistant.
Check Stock

Softride Quiet Ride Locking Tightening Hitch Pin Anti-Rattle for Receiver Hitches Bike Racks or Boat Trailers Silence the clanking noise that occurs while towing 25219

  • Compatible with hitch receivers, hollow shank ball mounts, and multiple brands of hitch mounted bike racks, including Thule, Yakima, Saris, Kuat,....
  • Eliminate the annoying rattle and vibration when towing by using this versatile anti rattle anti theft accessory, compatible across brands. Anti....
  • Perfect for use with a car, van, truck, RV, tow vehicle, SUV, ATV, bicycle rack, camper, fifth wheel, boat trailers, cargo trailer, gooseneck and....
  • Kit includes: heavy duty solid stainless steel threaded hitch pin, lock washer, nut, rugged nut holder and fit adjuster.
  • Easy installation – hand tighten the pin, THEN attach lock, THEN wrench tighten. Install with hitch classes 1, 2, 3, and 4 (i. ii. Iii. Iv), on 2”....
Check Stock

TOPTOW Hitch Extender 8-1/2" Extension Length , Fits for 2 inch Receiver, Anti-Rattle Bolt, with Hitch Pin Kit

  • ADD SPARE SPACE: This receiver hitch extender can extend to 8.5 inches length, add spare space between your bumper beam and your hitch mount bike rack or cargo carrier.
  • ANTI-RATTLE DEVICE: With seperate anti-rattle bolt on 2 inch receiver, it can eliminate the hitch wobble at the junction of your bike racks, cargo carriers, trailer ball mounts and your hitch receiver.
  • HIGH STRENGTH: This 2 inch receiver tube is rated to tow up to 3500/350 lbs GTW/TW.
  • Package: Comes with 8-1/2" hitch extender, 5/8" Hitch Pin and Clip.
  • Black Powder Coating Finish, Enhanced Rust and Corrosion Resistance.
Check Stock

JOYTUTUS Trailer Hitch Locks with1/2 and 5/8 Dia 2-3/4 Long Pin Fits Class I-V Receiver for Trailer Truck Car Boat with 4 Keys 4 O-Rings Anti-Theft and Waterproof Locking

  • 【ANTI-THEFT】 Unlike other hitch pin locks, each lock cylinder is unique and designed by JoyTutus. With solid and heavy-duty No.45 steel....
  • 【FITMENT TYPE】 Use a tow receiver lock to ensure the towing safety. The locking hitch pin is compatible with hitch rack, cargo hitch tray, bike....
  • 【PREMIUM MATERIAL】 The trailer receiver lock uses black electrophoretic painted carbon steel, solid and hard to bend. 360 degree rotating head,....
  • 【EASY OPERATE DESIGN】 The hitch lock can be easily locked and unlocked with key. For convenience, our lock comes with 2 keys each set. And after....
  • 【PREVENT RATTLING NOISE】 When you are using a trailer hitch, you might run into some issues like rattling and noise. Our trailer hitch lock pin is....
Check Stock

Let's Go Aero (SHP2040-XL) Keyless Press-on Locking Silent Hitch Pin for 2.5in Hitches

  • HEAVY-DUTY: 5/8 inch anti-rattle pin fits 2.5 inch hitch receivers with up to Class IV tow ratings (12,000 lbs max).
  • requires hollow shank tube tow equipment.
  • SILENT TOWING: Eliminates distracting rattle & motion in hitch while absorbing shock loads.
  • metal sleeve equalizes 5/8in shoulder across both pin holes for increased sheer strength.
  • STATE-OF-THE-ART: Steel spring nut and enhanced corrosion resistant, self-lubricating finish with chrome, zinc, and stainless steel components.
  • EASY TO USE: 90 degree press-on lock swivels for convenient, no fumble access in tight hitch spaces.
  • ANTI-CORROSION: Heavy-duty lock with watertight nylon jacket and dust cover for easy grip and corrosion protection to interior and exterior.
Check Stock

Fastway Flash STBM DT-STBM6800 Adjustable Silent Tow Ball Mount with 8 Inch Drop, 2 Inch Shank, and Chrome Plated Balls

  • 003cb003eVIRTUALLY ELIMINATES HITCH RATTLE:003c/b003e The exclusive anti-rattle design uses an internal mechanism to lock the shank in the receiver, and the ball holder to the shank, virtually eliminating all hitch noise and includes an anti-theft hex key to deter theft.
  • 003cb003eFAST AND EASY ADJUSTMENTS: With adjustable height and dual hitch balls, it is an excellent choice for towing multiple trailers.
  • 003cb003eBUILT TO HANDLE THE HARSHEST ENVIRONMENTS: The aircraft-grade aluminum and stainless steel anti-rattle pin resist corrosion better than any other ball mount, giving you years of stunning good looks.
  • 003cb003eLIGHTER THAN STEEL: The aluminum used in every STBM gives you unmatched strength and durability. The STBM easily handles the heaviest of loads, at about half the weight of comparable steel ball mounts. This makes carrying, adjusting, and installing your STBM easy and comfortable.
  • 003cb003e1,000 LB. MAX TOUNGUE WEIGHT / 10,000 LB MAX TRAILER WEIGHT WITH DUAL HITCH BALLS003c/b003e, is a great and easy choice for towing trailers.
Check Stock