Reviews Ansi B16 9 Fittings

Under Sink Water Filter Install Kit, Complete Filtration System for Kitchen and Bathroom Faucets

  • Enjoy crisp and clean filtered water directly from your sink faucet!.
  • QUICK & EASY INSTALLATION – Ready in less than 20 minutes. The PureWater Filters® Under Sink Water Filter Kit comes with everything you need, including easy to follow instructions and graphics. The included Quick-Connect fittings offer fast and secure leak-proof installation..
  • CLASS 1 FILTRATION MEDIA – NSF Certified and Tested for NSF/ANSI Standard 42 for Taste and Odor Reduction and Chlorine Reduction Class I..
  • MADE IN USA – Includes FREE Lifetime Warranty for Defective and Malfunctioning Parts. A PureWater Filters® Lifetime Warranty registration card is included in every box..
  • INCLUDES: Inline Water Filter with 3/8” Leak Proof Quick-Connect Fittings, 5 Feet of 3/8” NSF Polyethylene Tubing, 3/8″ to 1/2″ Female Connector, 3/8″ to 9/16″ Female Adapter, 3/8″ to 9/16″ Male Adapter, Mounting Bracket with Screw, and Easy-to-Follow Installation Instructions..
Check Stock

Spears 461 Series PVC Pipe Fitting, Adapter, Schedule 40, 2' NPT Male x 2' Spigot

  • Adapter for connecting pipes or fittings of different types.
  • Male NPT threads on one end and spigot connection on the other for connecting two pipes with different ends.
  • PVC for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets NSF/ANSI 61 Annex G, NSF/ANSI 372 for quality assurance.
Check Stock

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....
Check Stock

DKKY 40A Brushed ESC Motor Electric Speed Controller 6-12.6V for 1/16 1/18 1/24 etc RC Model Cars Tracked Tanks Boats Short Trucks RC Car Upgrade Parts

  • 1.2 lithium batteries or 6 nickel hydrogen: 280, 370 or 380 size motor RPM is lower than [email protected].
  • 2.3-cell lithium battery or 9-cell Ni-MH: 280, 370 or 380 size motor RPM is lower than [email protected].
  • 【Suitable for】: Suitable for 1/16 1/18 1/24 etc RC Model Cars Tracked Tanks Boats Short Trucks RC Car；Also suitable for MN86K MN86KS MN86 MN86S MN90 MN90K MN91 MN91K MN45 MN45K MN99 MN96 MN99S modification； Also suitable for WPL B14 B14K B16 B16K B24 B24K B36 B36K C14 C14K C24 C24K C34 C34K C-34 KM modificatio.
Check Stock

Plumb Shop Brasscraft CSSL54-24P Stainless Steel Gas Dryer Connector, 24-Inch

  • Flexible stainless steel corrugated tubing with stainless fittings.
  • A.G.A. Approved for indoor or outdoor use according to ANSI Z21.24 and Z21.45. 1/2" Male I.P.S. X 1/2" Female I.P.S. Fittings.
  • Corrugated flexible Stainless Steel gas dryer connector.
  • Polymer coated, 1/2-Inch inside diameter, 5/8-Inch outside diameter, tube with fittings.
Check Stock

Dixon 1/8\ x 1/8\ Brass Female Elbow Compression Fitting (170C-0202)

  • Approved to ansi/nsf 61-4 California ab 1953.
  • Meets federal state drinking water act, lead free requirement.
  • Brass castings conform to astm B584, uns alloy C8933.
  • Brass fittings dimensions conform to asme B16.15.
Check Stock

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack 16 Gallon & 21 Gallon | RV Water Holding Tanks

  • Combo Pack of RV Fresh & Gray Water Tanks, 16 Gallon & 21 Gallon.
  • NSF Certified MATERIALS used for manufacturing process -- ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density....
  • These 16 and 21 gallon tanks each have two 1/2" female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1....
  • 16 Gallon Tank measurements - 25.25" x 17.25" x 10.5" (+/- .25").
  • 21 Gallon Tank measurements - 34" x 9" x 16" (+/- .25").
Check Stock

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack 10 Gallon & 13 Gallon | RV Water Holding Tanks

  • Combo Pack of RV Fresh & Gray Water Tanks, 10 Gallon & 13 Gallon.
  • NSF Certified MATERIALS used for manufacturing process -- ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density....
  • The 10 and 13 gallon tanks each have two 1/2" female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1....
  • 10 Gallon Tank measurements - 18 3/4" x 13 3/4" x 8 3/4" (+/- .25").
  • 13 Gallon Tank measurements - 21" x 16" x 9" (+/- .25").
Check Stock

Stone Pro, Traverfill Pro Adhesive

  • Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
  • Promotes maximum fusion between pipe and fitting during welding.
  • Specially formulated for wet and/or quick-set applications.
  • Compatible with all classes and schedules of PVC and CPVC.
  • Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • 【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
Check Stock