Reviews Anodized Pulley

Zigco LLC SpinRX - Tangle Proof Swivel Pulley - Boat Anchor Pulley - Anchor Pulley for Drift Boat - Pulley Block - Made in USA

  • ...anchor pulley from solid, aerospace-grade aluminum. The SpinRx is machined (not cast) which increases the overall durability and strength of the product. This product is designed to last and is able to withstand the abusive environment that an anchor is subjected to..
  • HARD ANODIZED. The SpinRx is hard anodized for better corrosion and wear resistance. Anodizing hardens the surface of the aluminum which makes our product bomb proof. This product is both lightweight and extremely durable..
  • ALL STAINLESS STEEL HARDWARE. The SpinRx incorporates all stainless steel hardware which allows the product to be used in both fresh and salt water environments. The stainless steel hardware combined with the anodized aluminum components prevents corrosion and increases the life of the SpinRx. This product will not rust!.
  • SEALED BALL BEARINGS. The SpinRx contains two sealed roller bearings which allow the anchor to spin independent of the anchor rope. These roller bearings are sealed, keeping out dirt and sand, and require no lubrication over the lifetime of the pulley. These bearings are high quality, stainless steel bearings, and will not....
Check Stock

NewDoar 30KN CE Certified Large Rescue Pulley Single Sheave with Swing Plate for Outdoor Mountaineering Rock Climbing Rescue(Blue 1pcs)

  • [Material] Anodized light alloy Swing side plates and pulleys for easy and rapid rope installation and removal! Net Weight:0.6 Ib(270g).
  • Dimensions:3.23"W(8.1 cm) * 4.8"L(12.2 cm)..
  • [Single Pulley] Breaking Strength:30kN / 6746 lb for high durability to satisfied your requirements..
  • [Applicable Rope] Compatible with wide range of ropes up to 16mm /0.6 inch. for complex rescue / hauling system setup..
  • [Hanging Design] The hanging point is an elliptical design, so that the force is even when hanging, and the rolling tension is 15KN. great for a variety of industrial and sports applications..
  • [Widely Use] Rock climbing pulley for mountain rescue, tower work, ski patrol or whatever requires block and tackle system.For hauling big load, large pulley is much more better and easier..
Check Stock

EKEV Flagpole Truck Pulley and Gold Anodized Top Ball Ornament Topper Set - Fit for Most Standard US Flag Poles (2

  • ...side is 2"), Threaded hole in top of truck accepts ornaments with a spindle threading of 1/2"-13NC, Accepts a maximum halyard diameter of 5/16", Suitable for most standard US flagpole and top ornament.
  • PREMIUM MATERIAL: Flagpole trucks have sturdy cast aluminum with nylon pulley, Durable and anti-ruse.
  • Gold top ball anodized aluminum finish and corrosion resistant, Durable and weatherproof, Long lasting for work.
  • GOOD LOOK: Nice accessories on your flagpole top, make your USA flag pole looks more exquisite.
  • Replace your rusted and old flagpole top ornament and pulley truck, Your flag pole top decoration will look new again!.
  • EASY TO USE: Simply install the top ornament (gold ball) into the truck, and adjust the truck position on the top of the flag pole and secure the screw, Also, it is easily to pass the halyard rope through the pulley.
  • If you also want to install top gold ball or perfect flagpole repair kit (includes flagpole halyard rope, cleat hook, swivel snap hook), Do search & at amazon.
Check Stock

Evergreen Flag Two-Position Cast Iron Bronze Flag Pole Bracket

  • ..." maximum Outside Diameter flagpole tube (Truck inside is 2"). Flag pole pulley accepts a maximum halyard diameter of 5/16"..
  • Flag Pole Ball - 3 inch ball diameter, 1/2" thread rod suitable for most standard USA flagpole, as well as the mounted light or pulley truck on top of flagpole! Unique aluminum alloy and gold anodized finish decor, which make your US flag pole more particular and exquisite..
  • Flag Pole Rope & Clips - 50 feet long and 0.25 inch in diameter, suitable for flagpoles up to 25 Ft. Flag halyard made of tightly braided polyester flagpole rope, resistant to UV, abrasion and stretch.
  • Can be used in any weather. With 4 pcs 1.85 Inch nickel plated flagpole swivel snap hooks which fasten the flag on the flagpole, prevent the flag from tangling..
  • Flag Pole Cleat Hook - Flagpole cleat hook have 4.23“ length and hardware distance between bolt center is 0.8”. Light duty zinc cast cleat, Durable and great use for fastening rope to flagpole..
  • Purchase Guaranteed - We are so confident with our products that we can offer a 100% money-back guarantee if you are not 100% satisfied with your purchase within 30-day period..
Check Stock

VMS Racing 90-01 VMS Racing Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Honda Acura Integra including GSR and Type-R 1990-2001

  • [ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
  • Weight = 9.8 OUNCES!!! Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
  • CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
  • Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
  • Compatible with Fitment on Honda B16 B18 B20 (DOHC Engines) 90 91 92 93 94 95 96 97 98 99 00 01 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 (IMPORTANT - will NOT fit B20A engines). Please note. This pulley WILL disable your A/C and may require a shorter belt depending on your application..
Check Stock

Sunhokey 5M GT2 Timing Belt 6mm Width+6pcs 20 Teeth 5mm Bore Timing Pulley Wheel+ 4pcs Idler+ 4pcs Tensioner Spring Torsion + 2pcs Gear Clamp Mount Block with Allen Wrench for 3D Printer CNC

  • ????【5M Timing Belt】The timing belt is made of premium rubber, durable and flexible. It’s designed specifically for linear motion, high positioning accuracy. It is popular for most 3D printers, Reprap, Prusa, MendelMax, etc..
  • ????【Timing Pulley Wheel】Adopt high-quality aluminum, excellently machined, finished smoothly. The timing pulley with 20 teeth contact with the belt which minimizes the risk of the belt slipping..
  • ????【Timing Belt Idler Pulley】Made from high-quality aluminum alloy, high hardness, anodized surface treatment, effective waterproof and rustproof, corrosion-resistant, more beautiful and durable..
  • ????【Locking Spring】With the springs, you can add the right tension you need and make your prints much more precise..
  • ????【Mounting Block】The mounting block is used in open belt buckles for a 2GT belt (and some other models). Make sure that the gearbox is firm and free from loosening..
Check Stock

ACDelco GM Original Equipment 10085754 Crankshaft Pulley , Black

  • Compatible/Replacement For: Acura / Honda K20 / K24 Engines Only.
  • [ Attention: Some Listed Models Will Require Engine Swap Of A K-Series Engine ].
  • Please Check Your Engine Before your purchase.
  • Lightweight aluminum pulley made from T6061 aluminum and anodized for durability.
  • No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation.
Check Stock

Harmonic Balancer Engine Crankshaft Pulley Ka24E Febest NDS-KA24E Oem 12303-86G0A

  • [ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
  • Weight = 15 ounces. Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
  • CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
  • Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
  • Compatible with Mazda Miata 1.8 L .8L Liter Litre BP-4W BP4W Mazdaspeed MX5 MX-5 Turbo Turbocharged Roadster 99 00 01 02 03 04 05 1999 2000 2001 2002 2003 2004 2005 CP549 performance engine swap.
Check Stock

HJ Garden 2pcs 16 Teeth 3mm Bore Idler Timing Pulley with Bearing 2GT Aluminium Alloy H Type GT2 Synchronous Wheel Without Teeth for 6mm Width Belt 3D Printer CNC Mechanical Drive Black

  • 2pcs Black GT2 16 Teeth H Type Idler Timing Pulley, Fit for 6mm Width Timing Belt.
  • Inner Bore: 3mm, Teeth Width: 6.5mm, Overall Height: 8.5mm, Outer Diameter 13mm, Type: Smooth without teeth.
  • Made from high quality aluminum alloy, high hardness, anodized surface treatment, effective waterproof and rustproof, corrosion resistant, more beautiful and durable..
  • Each idler timing pulley has double bearings, to ensure the machine runs well..
  • Widely used in milling machine, gear forming machine, drilling machine, CNC lathe, hobbing machine or other mechanical transmission occasions..
Check Stock

3/4\ Parallel Crankshaft Crank Fits Honda GX160 5.5HP QX QH Engine 196cc 212cc Go Kart

  • [ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
  • Weight = 1 pound 15 ounces. Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
  • CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
  • Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
  • Compatible with 99-00 Honda Civic Si w/ DOHC (B16A2) 96-97 Honda Civic Del Sol w/ DOHC (B16A3) 94 95 96 97 98 99 00 01 Integra including GSR & Type-R (B18B1 B18C1 B18C3 B18C5) and 1997 1998 1999 2000 2001 Honda CRV (B20Z & B20B require different sized belts)..
Check Stock