Reviews Angle Vise Grips

Nuovoware Heavy Duty Bench Vise 4.5 Inch, 240° Swivel Locking Base Bench Clamp with 125mm Vise Jaw, Clamp-on Home Merchanic Vice Desktop Clamp for Woodworking, Drilling, Cutting Conduit - Black&Blue

  • ...vise to position your workpiece. Smooth guide rail makes the screw and handle function smoothly and effortlessly. A great helper for left-handers..
  • 【High-Quality Cast Iron】: Made of strong nodular cast iron and machined to very close tolerances. Withstands distortion under high pressure. Stainless steel vise jaw grips the projects firmly with the adopts quenching and re-fire technology to increase its hardness and strength. This bench vise presents your with rugged use and longer life span, which much gives you an excellent working experience..
  • 【Strong Magnetic Vise Jaw Pads】: Including a pair of magnetic rubber vise jaw pad in size 125mm to help you protect the projects from scratches, and grips any threaded/smooth parts like wood, metal, plastic, tubing firmly and safely. Magnetic features super easy installation and offload for any other metal bench vise, make your projects efficiently..
  • 【Wide Application】: The smooth and dependable action bench vise is ideal for professional use, home, workshop, educational institution use, providing clamping for light applications, such as cutting conduit, drilling, gluing, woodworking, metalworking, sanding or planing, sawing and so on..
Check Stock

2 Pack 11' Vise Grips Locking C Clamp Pliers W/flex Pads

  • 2 PACK 11 STARK VISE GRIPS LOCKING C CLAMP PLIERS W/FLEX PADS MAX JAW".
  • 2 1/2" SWIVEL PADS PERFECT FOR UNEVEN OR OFF".
  • ANGLE SURFACES THAT NEED TO BE CLAMPED Quickly Adjusts To Right Size Locks.
  • With Squeeze of One Hand / Unlocks With Flick of A Finger Release Both.
  • Hands & Stays Adjusted Perfect For Welding.
Check Stock

Karma Velour Red Jumbo (+1/16') - 13 Piece Golf Grip Kit (with Tape, Dynacraft Solvent, Vise clamp)

  • The grip kit includes the following: - 13 grips - 13 strips of 2" double-sided grip tape - 4 ounce bottle of Dynacraft grip solvent - rubber vise clamp.
Check Stock

Housolution Bench Vise 4 Inch, 360°Swivel Base Bench Clamp with 100mm Vise Jaw, Home Vise Clamp-On Vise Repair Tool Work Bench Vice for Cutting Conduit, Drilling, Metalworking - Black & Blue

  • ...ng and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work..
  • 【360 Degree Swivel Base with Dual Locking Nuts】: Built in 360 dergree swivel base, perfect for a wide range of clamping angles. Even if you are a left-hander, you can rotate the vise to the position that suits your work. The dual locking nuts helps to clamp the work piece properly..
  • 【Magnetic Vise Jaw Pads with Multi Grooves】: Packaged with 100mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items, safely protecting flat or round product. Provide three kinds of angle for clamping items: 60°, horizontal angle, vertical angle. Please refer to the picture for angle diameter..
  • 【Wide Applications】: This bench vise is designed for home, workshop, professional use, general purpose and light work, ideal for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, etc. It can be used indoors or outdoors. Convenient and quick to install on or remove from kinds of workbench..
Check Stock

Sumind 3 Pieces Golf Grip Kits with Golf Grip Tape Strip Double Sided Golf Tape, Hook Blade and Rubber Vise Clamp

  • Golf grip kits: package contain 1 roll 2 inch x 18 Yard golf grip tape, vise clamp and hook blade, allows you to conveniently re-grip your golf clubs with ease – No matter it be your favorite driver, iron, wedge or putter,that will make your golf club re gripping easier.
  • Adhesive grip tape: the golf grip tape can maintain its adhesive ability for 550 hours, which owns good weather resistance,Safe and reliable.each roll golf club grip tape can be cut according to the size of your grips, which is convenient and practical.
  • Retractable hook blade: the hook blade is made of high strength carbon steel, golf grip remover has been tested to last well over 100 grips removed.
  • Rubber vise clamp: Made of thick rubber, the Included 3.5 inch Rubber Vise Clamp Features Shoulder Grip Wedges to Prevent Slippage while Your Club is in the Vise and can be applied for all Your Golf Repair Needs.
  • including wedges, irons, drivers, putters, and more.
  • Easy to use: the double sided golf tape is much easier & more convenient than using a grip tape roll, easy to peel liner, saving time for you.(Grip solvent is required, just as with any grip tape.
Check Stock

IRWIN VISE-GRIP Wire Stripping Tool / Wire Cutter, 5-Inch (2078305)

  • IRWIN VISE-GRIP wire stripper/cutter works as both a wire cutter and a wire stripper.
  • 10-20 AWG selection dial adjusts for stripping wire of varying gauges.
  • Textured grips help reduce hand slippage.
Check Stock

findmall Parrot Vise 3.5 Multi-Angle Vise 3-1/2 for Luthiers and Woodcarvers

  • Features - This unique vise swivels a full 360-degrees and then locks in place when the jaw is tightened..
  • Multi-Angle - Capable of clamping in the upright position, side-to-side or at any angle..
  • Convenience - This handy vise can be used in nearly any position for a range of applications..
  • Advantage - The Parrot Vise can be mounted sideways for versatility and allows you to secure your workpiece in whichever position is most suitable for your application..
  • Application - Great vise for Luthiers and woodcarvers and anyone that works with uniform or odd shaped materials that want extra versatility in work-holding and workpiece placement..
Check Stock

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock

Raynesys Bench Vise, 4-1/2\ for Workbench, 4.5 Inch Table Vise Heavy Duty with 260° Flexible Swivel Base for Woodworking, Metalworking, Cutting Conduit, Drilling - Blue

  • ... to grip. The jaw adopts quenching and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work..
  • 【Swivel Feature】: Built in 260 degree swivel base, perfect for a wide range of clamping angles. It allows an ever greater degree of accuracy while you are working with a hand tool as there is no need to keep inserting and removing the piece you are working on..
  • 【Rubber Jaws Covers】: Packaged with 125mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items, safely protecting any flat or round product. Provide three kinds of angle for clamping items: 45°, horizontal angle, vertical angle. Please refer to the picture for angle diameter..
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock