Reviews Angle Ruler For Drawing

Angle Protractor ,Stainless Steel Angle Ruler Finder 0-180 Degrees ,10 cm Woodworking Ruler, Angle Measure Tool, Angle Finder Ruler, Craftsman Angle Measure Tool

  • 2 in 1 Angle Finder : It is 2-in-1 manual protractor ruler for measuring lengths and angles. Great gift for dads, men and women who work in woodworking, construction, engineering..
  • Durable Angle Ruler: It is stainless steel protractor,prevent rust and corrosion , do not bend or deform easily ,laser etched measurements offer clear reading ..
  • Lightweight and Portable : You can put the angle measure tool in your pockets,the angle finder ruler is clear and accurate for measuring length(0-10 cm)..
  • Adjustable Protractor Arm : The protractor arm can be easily asjusted from the nut, so it helps you draw radial lines, measuring and marking angles..
  • Wide Applications : This angle ruler is a practical measuring tool for school, office, architect, suitable for for engineering, school, office, architect, and drawing who needs to measure data..
Check Stock

Upgraded woodworkers Edge Ruler Thickness 1.5mm Approximately 15in .0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler JXHONG

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

YEESHYBON Multi-Angle Measuring Ruler,12-Side Aluminum Alloy Universal Angle Measuring Tool, Tile Tool, Angle Finder Template Tool for Builders, Craftsmen, Carpenters

  • EASY TO USE & INCREASE EFFICIENT: This ruler has 12 sides and has a more extensive range of use, which is more powerful than ordinary six sides rulers. This ruler can be folded and disassembled, and the number of rulers can be used according to different situations. Very efficient measurement drawing positioning tool!.
  • WIDE RANGE OF APPLICATIONS: Multi-angle measuring ruler is suitable for all kinds of work, woodworking, floor, ceramic tile, glass installation, etc. It could be widely used in different fields, replacing plastic angle rulers..
Check Stock

Woodworking Edge Ruler, 0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler, Angle Measuring Ruler,Thickness 1.5mm Approximately .(20in)

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

WEIKUELE Woodworkers Edge Rule,Multifunction Protractor Angle Finder,0-70°Adjustable Edge Angle Measure Tool, for Student Drawing and Woodworkers Build Furniture (15 in)

  • Reliable quality: The measuring device and the ruler body of the woodworking side ruler are made of stainless steel, which has anti-corrosion and anti-rust functions and can be used for a long time..
  • Accuracy: The ruler tool can be adjusted from 0° to 70°, and there is a steel ball every 5° (plus 22-1/2°, 67-1/2°), which can firmly lock the angle drawing line during measurement.
  • Any angle can be obtained by moving and rotating the ruler..
  • Available in three sizes: This product is available in three sizes of 10", 15" and 20" to ensure your various needs in use..
  • Simple operation: This ruler makes layout a breeze, fast and accurate. Turn the ruler to get your desired angle. Adjust the nut for the best feel..
  • Wide range of uses: Ideal for students, mechanics, carpentry, vehicle maintenance and repair, construction, drafting. Can be used in workshop, home improvement, toolbox, cabinet..
Check Stock

A3 Portable Drawing Board, Multi-Function Metric Drafting Table with Clear Rule Parallel Motion and Angle Adjustable Measuring System

  • A3 drawing board: the portable A3 drawing board is made of hard plastic with exquisite workmanship, which is an indispensable practical tool for drawing.
  • Its size is 51 x 37 cm/ 20.1 x 14.6 inches, easy to carry around.
  • Package content: you will get a drafting table, a protractor, a straightedge ruler, a L-shaped drafting square and 2 non-slip tilt table support feet, all of them are packed together in color carton for easy carrying.
  • Convenient design: non-slip tilt table support feet can be firmly snapped on the drawing board and can be slid at will, which makes the drawing board provide you with a comfortable tilt angle when in use.
  • The protractor can be applied in conjunction with the triangle, and the groove design can help move and draw lines easily, saving space.
  • Practical function: the straightedge ruler can not only slide back and forth in the groove, but also has a double locking buckle.
  • You can fix the ruler on the drawing board by lightly pressing, and coordinate with other rulers to draw or read.
  • The buttons on the edge can control the opening and closing to fix the drawing paper.
Check Stock

Home Designer Suite

  • Our drafting table is a complete A3 Drawing Board Work Station with a parallel motion which slides in a Groove, locking into place with finger buttons at either end, suitable for multiple drafting usages, lightweight for easily carriage, high strong and durable plastic structure to be extremely sturdy..
  • Equipped with a clear sliding ruler marked in inches, 180-degree protractor, equidistant lines for hatching, long guide, quick release paper grips, 45 set square and 2 anti-slip support legs, you can attached to the back that elevates the back of the the board. It's features makes it a very easy and comfortable drafting and drawing working position..
  • It's Fashion, Creative, is a very useful accessory to practice your drawing skills, also as a Gift, It makes the drawing process more accurate and stable. give you comfortable and less effort drawing experience. There are paper clips on both sides of the board and with scale clamp on the bottom,to make you draw up your plans very nicely..
  • The L-system straightedge design allows drawing along the top edge of the straight edge right down to the bottom of the sheet, with ....
Check Stock

ExGizmo A3 Drawing Table Board, Adjustable Measuring System Angle Parallel Motion Drawing Board

  • A3 DRAWING BOARD: This Is a complete A3 Drawing tool set with a parallel motion which slides in a Groove. Made of high quality plastic, lightweight and durable, Ergonomic designed.
  • T-SQUARE AND TRIANGLE: The T-square straightedge slides up and down on a plastic runner,and maintains a nice 90° angle and can be locked into position on both sides of the board.With 12cm rotating ruler and 12cm triangle with angle attachment slide in a groove on the T-square, making it very easy to move back and forth.
  • APPLICABLE OCCASIONS:This drawing board is an indispensable tool for engineers, designers and engineering students, and also a perfect gift to your friends.
  • PAPER LOCATOR AND TILT ANGLE FEET: There are paper clips on both sides of the board and with scale clamp on the bottom, to make the drawing process more accurate and stable. You can also attached the anti slip support legs to the back of the the board, find a comfortable drawing angle.
  • PRACTICABILITY: Fashion, Creative, Ergonomic designed Drawing Board. It is a very useful accessory to practice your drawing skills, It is a helpful to....
Check Stock

HTTMT- 20 Woodworker Edge Ruler 0-70°Adjustable Protractor Angle Finder Two Arm Carpentry Ruler Measure Layout Tool [P/N ET-TOOL041-20-RAW]

  • 【Multi-function】HTTMT woodworking protractors & ruler is a 2-in-1 device Compatible With length and angle measuring / drawing..
  • 【High Accuracy】The ruler tool can be adjusted from 0° to 70°, and every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle....
  • 【Simple Operation】You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Even if....
  • 【Easy Storage】Each woodworking ruler is equipped with a wall-mounted storage rack, which makes it easy to store..
Check Stock