Reviews Angle Processing

HayWHNKN Woodworking 6\ Benchtop Jointer Bench Planer Jointer Planer with Extendable Table 220V

  • High power pure copper motor, strong power, fast heat dissipation is not easy to hot..
  • Wide working table, more smooth and stable planing..
  • 1800W high power, strong power. Strong wind, fast heat dissipation, not easy to hot..
  • Adjustable Angle bafle, can adjust the Angle between 900-1350, baffle adjustment is simple and convenient, higher processing efficiency, more accurate..
  • Fixed alurninum plate can be adjusted before and after movement and up and down height adjustment, processing more accurate, more safe..
Check Stock

3/25 Inch 3mm Straight Shank Cemented Carbide 90-Degree Spot Sample Drill, Suitable for Fixed-Point Drilling Or 90-Degree Chamfering and Deburring of Workpieces, High Smoothness (3mm)

  • Strong And Wear-Resistant: A Milling Cutter Is Made Of High-Quality Tungsten Steel Base Material With Advanced Quenching Technology As The Base Material, Which Greatly Improves The Wear Resistance And Strength, And Increases The Service Life Of The Milling Cutter..
  • Sharp Edge: Adopt Advanced Sharpening Equipment, Fine Processing To Ensure That Each Tool Is Finely Processed, Wear-Resistant, Durable, And Smooth..
  • Wide Range Of Applications: Suitable For Ai Intelligent Robots, Drones, Automobiles, Dental Orthopedics, Aerospace, Household Appliances, Mold Processing And Other Fields. Choosing The Right Tool Will Make You More Convenient, Faster And More Efficient..
  • Sharp Large Rake Angle: After Years Of Continuous Research And Development And Innovation, Continuous Improvement Of The Process, The Sharpness Of The Large Rake Angle Has Been Greatly Improved, Thereby Reducing The Generation Of Cutting Heat And Solving The Problem Of Sticking From The Root..
  • Good Processing Effect, Improve Efficiency And Extend Tool Life.
Check Stock

1/4\ Pneumatic Angle Grinder Air Cutting Machine Long Handle Air Angle Grinding Cutter Sander Tool 90PSI 18000RPM

  • 【Cutting Blade】This Pneumatic Angle Grinder is equipped 3 ”-75mm cutting blade with 180 degree metal safety cover, safety to use..
  • 【Extended Handle】Extended handle design, ergonomics, easier to operate than normal length handle. Easy 360-degree operation..
  • 【Safe Start-stop Switch】The pressure-type start-stop switch is safer and reliable. Stepless speed regulation rotary switch, according to different uses, choose different speeds to meet different needs..
  • 【Inlet And Exhaust Port】The air inlet filter screen design effectively filters air impurities.
  • The humanized annular exhaust design is more environmentally friendly..
  • 【Application】This Air Angle Grinder is suitable for automobile repair, hardware processing, ship repair, injection molding processing, etc. Big torque, high power, meet all your needs..
Check Stock

BAP400R-50-22-4T Milling Cutter NT40-FMB22 Collet Chuck Holder Indexable End Mill APMT1604 Carbide Inserts for Milling Machines (#1)

  • Adopted New Coating Technology: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time.
  • BAP400R Right-angle Milling Cutter: BAP400R right-angle milling cutter reduces blade wear and saves processing costs.
  • Fast Milling: Fast milling, screw off-position fastening designed, make the Milling Inserts and cutter fit tightly.
  • High Working Performance: This is a high precision Milling Cutter , strong rigidity, good processing effect.
  • High Hardness: The milling cutter is made of high quality material, high hardness with good impact resistance.
Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

GBJ APKT1604 PDFR Aluminum R0.2 Cutting Inserts Aluminum Cutting Tool Turning Tool CNC Tools AL+TIN Alloy Wood

  • ☞Material:Using imported substrates, the service life is greatly increased. Stable, durable and sharp when cutting..
  • ☞ Advantage: The cutting edge is sharp, the processing is brisk, and the chip removal is smooth. The cutting edge is specially treated, and the products processed have a high degree of smoothness and a mirror effect..
  • ☞ Processing range: JW40-aluminum alloy general processing and non-ferrous metal. Especially high-silicon aluminum alloy. 02 angle is especially suitable for finishing..
  • ☞ Package includes: 10pcs (Boxed) APKT1604PDFR-MA for Aluminum Inserts.
Check Stock

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Black)

  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Orange)

  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

100-240v Sanding Machine, Palm Sander Motor Box Spindle Box Machine Tool for Wood

  • Can be used for polishing, grinding, or various angle grinding.
  • The center height is 25mm, and the sandpaper grit size is generally 100#. The sandpaper can be selected according to different workpieces and processing requirements.
  • The transformer has over current, over voltage and over temperature protection.
  • The machine tool uses a more powerful motor, and the motor box and the spindle box are a combined structure.
  • Suitable for processing wood, engineering plastics, soft metals.
Check Stock