Reviews Angle Encoder Gauge

Neiko 20699A 1/2\ Drive Torque Angle Gauge, Clear

  • Torque angle gauge is used specially for later model engines that require a torque to yield fastener.
  • Easy to use arm attachment is used for holding the gauge in place for an undisturbed work flow while turn plate makes it easy to zero out the gauge.
  • 360 degree scale is large and easy to read with 30 degree intervals and 10 degree increments.
  • Specs: the angle gauge has a 1/2 inch male and female square drive ratchet handle.
  • Gauge measures angle of rotation after pre-torque in torque-angle applications.
Check Stock

GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet

  • 【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory..
  • 【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces..
  • 【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement..
  • 【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes..
Check Stock

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

  • 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
  • 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
  • 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
  • 【Usage】: Suitable For: Angle measurement.
Check Stock

Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case

  • Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
  • Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
  • Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
  • Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
  • Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.
Check Stock

Fielect 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 5 Pins 20mm Shaft 5Pcs

  • [Specification]- Type: EC11 Encoder with Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 5pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

Fielect 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 10mm Shaft 5Pcs

  • [Specification]- Type: EC11 Encoder without Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 2pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

Fielect 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 10mm Shaft 2Pcs

  • [Specification]- Type: EC11 Encoder with Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 2pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

10PCS 5 Pin Rotary Encoder+Washers+Nuts DC 5V EC11 Rotary Encoder Coding Switch Digital Potentiometer with Switch

  • [Specification]- Type: EC11 Encoder without Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 5pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock