Reviews Angle Cut Exhaust Tips

AUTOSAVER88 Universal Dual Exhaust Tip 2.5 Inch Inlet, 2.5' Inlet 3.5' Outlet 9.5' Length Chrome Polished Stainless Steel Exhaust Tailpipe Tip, 2 1/2 Inch Double Layer Staggered Exhaust Tip, Weld-On

  • universal fits 2.5″ outer diameter of trucks car exhaust tailpipe (note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

FEL-PRO MS 92467 Exhaust Manifold Gasket Set

  • Performance Dual Exhaust for Ram, Ford F-Series, Silverado & Sierra trucks.
  • Single 3 inch inlet /Dual 2.5 inch outlet Flowmaster Super 44 Muffler.
  • Two 2.5 inch high-flow mandrel-bent tailpipes, cut and swedged.
  • Two 3.5 inch x18 inch WELD-ON angle-cut chrome tips.
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

Gibson Performance Exhaust 65658 Stainless Dual Extreme Cat-Back Performance Exhaust System

  • Performance Dual Exhaust for Ram, Ford F-Series, Silverado & Sierra trucks.
  • Single 3 inch inlet /Dual 2.5 inch outlet Flowmaster Super 44 Muffler.
  • Two 2.5 inch high-flow mandrel-bent tailpipes, cut and swedged.
  • Two 3.5 inch x18 inch WELD-ON angle-cut chrome tips.
Check Stock

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

  • Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
  • Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
Check Stock

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5" Inlet 3" Outlet 9.5" Long Chrome Polished Stainless Steel Double Wall Exhaust Tail Tip for 2.50" Outside Diameter Tailpipe, 2 1/2 Inch Exhaust Tip, Weld On

  • universal fits 2.5" outer diameter of trucks car exhaust tailpipe (please make sure the outlet outer diameter of your vehicle tailpipe is 2.5" before purchase).
  • Anti-deformation & rustproof: Built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, polished finish offer your car with a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

Jinsanity Performance Dual Exhaust Tip 2.5 Inch Inlet 3.5'x2 Outlet 10' Length Stainless Polished.(Double rolled, angle,welding) - 1 pair(Left and Right)

  • Design: Weld On – Rolled Edge – Angle Cut..
  • Wide Application: Fits 2.25″ Inlet diameter car exhaust tail pipe..
  • 2.25″ Inlet 2-1/4 inch exhaust tail pipe rectangle tips for universal use..
  • 1 Year Warranty: No instruction is included. Professional installation is highly recommended..
Check Stock

Milwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed....
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from....
Check Stock