Reviews Angle Bracket Hanger
23' Z-bar Hanger Mirror And Picture Hanging System,hangm
- zbar,ezbar,z hanger,mirror hanger,ez bar hanger,art hanger,heavy hanger,z bracket,art bracket,z bar,ez bar hanger,bracket,6 feet zbar,hanger for heavy item,mirrors hangers bracket,mirror hangers z,zbar bracket mirror hanger,hanger+,zbar+,z bar+,z-bar,hangman,cleat hanger,panel hanger,art hanger,heavy duty hanger,z clip,french cleat hanger.
Check StockUniversal Ceiling Mount with Tray for Projector/Camera, No Hole Installation, Height Adjustable 11.4-22inches, in-Tube Cable Routing, Wall/Ceiling Mounting
- 【360°ROTATABLE】 This projector ceiling bracket has a 360-degree rotating head, you can adjust the angle by adjusting the pivot ball to meet your viewing needs..
- 【Convenient Universal Mount】 The universal projector bracket is suitable for most mini projectors on the market, with 3 sizes of mounting heads and screw diameters, 0.153/0.232/0.25 inches (3.9/5.9/6.35 mm). Note: Please make sure that the projector comes with screw hole Before you buy it..
- 【Rugged Aluminum Alloy Material】 The projector hanger is made of an upgraded version of high-quality aluminum alloy, wear-resistant and durable, and has a long life..
- 【Longer Length Design】 Most of the projector hangers on the market have a length of 17.5 cm/6.9 inches. This hanger is upgraded to a length of 23 cm/9 inches to get a better viewing angle..
- 【Safe Load & Worry-Free】 The projector bracket has a carrying capacity of 3.5 kg/7.71 lbs. When installing, please pay attention to whether it is overloaded and stable. If you have any questions, please contact us. We will reply within 24 hours and give a good after-sales service..
Check StockIbera Horizontal Bike Wall Mount Hanger, Indoor Bicycle Hook Holder Storage Rack for Home or Garage, 45 Degree Adjustable Angle to Keep Bike Level
- The wall hanger's angle (45°) can adjust to keep your bike level. Correct height for hanger tyres should sit atleast 4 inch off floor or ground. Bracket must be mounted 2 hole side up.
- Designed as a horizontal mounting wall hanger for a single bike to save floor space. Weight limit- 39.6 pounds.
- The sturdy and durable construction made out of aluminum makes this hanger safe for bikes to hang on the wall.
- The double arm hanger has padded ABS arms to keep the bike secure and protects against paint damage.
- Suitable for most conventional bike frames. Hanger beam length is adjustable to fit narrow or wide handlebars.
- Mount hanger on masonry or concrete wall with anchors. Do not mount hanger on plasterboard wall or dry wall unless there is a wood stud behind. If you have any questions about the installation, seek for professional help..
Check StockABN Exhaust Hanger Removal Pliers – 11In Rubber Exhaust Hanger Removal Tool Grommet Puller Muffler Rubber Hanger Plier
- SERVICE YOUR EXHAUST SYSTEM: Use the ABN Rubber Hanger Pliers Exhaust Hanger Puller Removal Tool to remove the hanging bracket from the rubber hanger when servicing your vehicle exhaust system.
- Spring-loaded muffler hanger tool pliers uses optimal leverage to separate parts for easy servicing and to protect your parts from damage.
- OPTIMAL LEVERAGE FOR EASY USE: 25-degree offset handle and 2-inch (5.1cm) faceplate allows for a comfortable hold and optimal leverage when working in tight and hard to reach areas.
- Compatible with most import and domestic vehicles that use exhaust hanger supports.
- EASY TO USE: Place the faceplate against the rubber hanger around the metal bracket.
- Align the 3/8 x 7/8 inch (.9 x 2.2cm) extension knob against the metal bracket then compress the muffler hanger pliers to push the bracket through the rubber hanger.
- BUILT TO LAST: High carbon steel exhaust hanger pliers provide maximum strength, durability, and leverage.
- Plier faceplate features .8 inch (2.1cm) opening to fit around your metal hanger brackets and against your rubber hanger grommet.
- COMFORTABLE GRIP: 11-inch (27.9cm) long muffler hanger removal tool rubber hanger pliers feature 4-inch (10.2cm) rubber-dipped grip handles that provide comfort and a secure hold while yo....
Check StockPBS Video
- Xbox Controller Wall Mount & Headphone Holder Hanger Bracket. This is not a generic bracket, this is a specific bracket designed for the best flush fit. Three piece kit that is easy to assemble, simply screw the headphone hanger extension to the bottom of the hanger with the adjoining self-tapping screws, line the hanger and the controller holder holes up and use the single screw to join the two and mount it to the wall (fixes to the wall with one screw)..
- Ultra-low-profile design unlike others, this prevents the device from sticking out from the wall. Fixes to the wall with only one screw and raw plug (if needed), all supplied with the bracket. Great for managing your setup and keeping it tidy. Never loose your controller & headphones again!.
- Designed for even the biggest gaming headsets on the market. Keep surface space clutter free! Cables can be wound around the holder for extra management. Can be fixed to walls, units, desks, beds, tables and more. Made of tough durable PETG. Various colours available..
- Note raw plugs do not have to be used depending on the circumstances. Note we also do various other wall mounts for this accessory and its device so be sure to check out our seller profile. Bracket and Fixings ONLY, Xbox Controller NOT Included..
Check StockKidde 366242 Vehicle Brackets, Metal, Running Board Bracket For 10 Lb Proline Fire Extinguishers Units
Check StockHighwild Steel Target Stand AR500 Shooting Target System (Stand, Mounting Kits & 4'+6'+8'+10' Gongs)
- ▶ GREAT COMBINATION! It contains 12" x 20" hostage target with 4" top swivel paddle, 2x4 target hanger and target stand base (2x4 board are not included). The target hanger and bracket base need to use the metal shim provided by us to make it more stable.
- ▶ EASY TO DISASSEMBLE AND CARRY. You can assemble and disassemble quickly and put it in your car to take you to any outdoor scene you want.
- ▶ STABLE AND SAFE PRODUCTS. The double T-shaped underframe can maintain stability to the greatest extent. At the same time, holes are drilled on each leg and can be fixed on the ground with floor nails (floor nails are not included). The 2x4 target hanger fixes the target at an inclined angle of 15 degrees to help deflect shrapnel to the ground.
- ▶ MATERIAL OF AR500 STEEL. The 3/8" thick steel plate cut by laser adopts powder coating, which is more durable. The bright neon colored steel plate enables you to have a visual effect over a longer distance.
- ▶ ENJOY SHOOTING! This combination is suitable for most pistols and rifles. You can hear the sweet jingle when hitting. It is very suitable for shooting training and improving your shooting skills.
Check StockKujunpao Exhaust Pliers Pipe Rubber Bracket Hanger Support Removal Tool
- 【Fit for】It has a wide range of applications,exhaust tongs are suitable for all imported and domestic automobile and truck exhaust systems, supported by rubber hangers..
- 【Function】The function of the pliers is to separate the exhaust hanger bracket from the rubber bracket..
- 【Easy to use】Anti skid handle for easier use.The user only needs to squeeze the handle of the pliers to remove the rubber bracket from the exhaust pipe hanger, so as to improve your work efficiency..
- 【 Package Includes】 1 pcs Exhaust hanger removal pliersl.
- 【Great Serivce Support】We guarantee to provide you with excellent product quality and after-sales. If there are any problems with our products, please feel free to contact us. We will do our best to ensure that you get the best products and services..
Check StockHighwild Target Stand AR500 Steel Target System - 10' x 16' Hostage Target with 2x4 Stand Mount Kit
- ▶ GREAT COMBINATION! It contains 10" x 16" hostage target with 3-1/4" top swivel paddle, 2x4 target hanger and target stand base (2x4 board are not included). The target hanger and bracket base need to use the metal shim provided by us to make it more stable.
- ▶ EASY TO DISASSEMBLE AND CARRY. You can assemble and disassemble quickly and put it in your car to take you to any outdoor scene you want.
- ▶ STABLE AND SAFE PRODUCTS. The double T-shaped underframe can maintain stability to the greatest extent. At the same time, holes are drilled on each leg and can be fixed on the ground with floor nails (floor nails are not included). The 2x4 target hanger fixes the target at an inclined angle of 15 degrees to help deflect shrapnel to the ground.
- ▶ MATERIAL OF AR500 STEEL. The 3/8" thick steel plate cut by laser adopts powder coating, which is more durable. The bright neon colored steel plate enables you to have a visual effect over a longer distance.
- ▶ ENJOY SHOOTING! This combination is suitable for most pistols and rifles. You can hear the sweet jingle when hitting. It is very suitable for shooting training and improving your shooting skills.
Check StockExhaust Pliers Hanger Bracket Removal Pliers Separates Rubber hanger Pliers Supports
- - This tool can separate the rubber bracket from the exhaust hanger bracket..
- - This tool is suitable for all imported and family car and truck exhaust systems supported by rubber hangers.(Works on all vehicles with rubber exhaust hangers.).
- - The operator only needs to squeeze the handles of the pliers to press down the rubber support from the exhaust hanger, making difficult work easier..
- - This tool saves a lot of time for your work, avoids frustration and increases life expectancy..
- - Package Included 1PC Exhaust Hanger Removal Pliers with Designated Item Box(See as first picture)..
Check Stock