Reviews Angle Bar Machine

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • ...g Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with....
Check Stock

EZ Bar Curl Barbell 4ft-22LB 330LBS Capacity Olympic Bearing Barbell (330LB-Sliver)

  • 【TRAINING】: Curl bars help target smaller muscle groups, such as biceps and triceps, and they can be used to add variety to workouts that barbells can't provide. They are a great way to target the upper body, whether you use curl bars alone, with a rack, or as a cable machine accessory..
  • 【SPECIFICATIONS】: Length is 47", self-weight is 15lb, load capacity is 330lb, sleeves diameter is 2", compatible with all 2 inch Olympic plates, this bar is very versatile..
  • 【MATERIAL】: Elevens curl bar is made of solid steel with a corrosion resistant chrome plated finish, it can withstand up to 330lb of weight, which is enough for everyone except elite trainees..
  • 【ERGONOMICS】: The Elevens curl bar is bent at a very delicate angle, and the ergonomic angle provides a more friendly wrist position when training the arms..
  • 【KNURLING】: Knurling is a key detail that helps enhance grip. Our curl bar has a medium depth of knurling, which means you can sweat it out and maintain a good grip..
Check Stock

EZ Bar Curl Barbell 4ft-22LB 330LBS Capacity Olympic Bearing Barbell (330LB-Black)

  • 【TRAINING】: Curl bars help target smaller muscle groups, such as biceps and triceps, and they can be used to add variety to workouts that barbells can't provide. They are a great way to target the upper body, whether you use curl bars alone, with a rack, or as a cable machine accessory..
  • 【SPECIFICATIONS】: Length is 47", self-weight is 22lb, load capacity is 330lb, sleeves diameter is 2", compatible with all 2 inch Olympic plates, this bar is very versatile..
  • 【MATERIAL】: Elevens curl bar is made of solid steel with a corrosion resistant chrome plated finish, it can withstand up to 330lb of weight, which is enough for everyone except elite trainees..
  • 【ERGONOMICS】: The Elevens curl bar is bent at a very delicate angle, and the ergonomic angle provides a more friendly wrist position when training the arms..
  • 【KNURLING】: Knurling is a key detail that helps enhance grip. Our curl bar has a medium depth of knurling, which means you can sweat it out and maintain a good grip..
Check Stock

Kreg KMS7102 Table Saw Precision Miter Gauge System, Blue

  • Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches.
  • Gauge head is CNC machine perfectly square to the bar and table ( no stampings).
  • Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver.
Check Stock

GFS Smith Machine with Linear Bearings with 7° Angle Free-Weight Barbell Home and Semi - Commercial Gym Workout Center Designed for Upper and Lower Body Exercise

  • Precise 7° angle Smith Machine combined with 7° angle freeweight barbell workout center designed for natural upper and lower body exercise movements..
  • Main exercises: Squat calf raise, Split squat shoulder,Shrug Rack Pull, Glute bridge Pull-up, Chin-up, Leg Raise. NOTE : The bar will go all the way to the floor on this model. It allows you to perform deadlifts and bent rows, in addition to the other hundreds of exercises with this machine, in a safe manner..
  • Linear ball bearing Smith system with 20 cross member lock-out points for a safe, solid stop at any point in your workout routine..
  • Freeweight gunrack system with 14 lift-off and racking positions for ultimate versatility, safety and control.
  • Large diameter Smith Bar responds quickly, is easy to control and weighs only 25 Lbs. It's ideal for amateurs or professionals..
Check Stock

Olympic Barbell Curl Bar 4ft/5ft/7ft for 2 Inch Weight Plates, Perfect for Home Fitness (330lb/400lb/700lb/1000lb/1500lb)

  • TRAINING: Curl bars help target smaller muscle groups, such as biceps and triceps, and they can be used to add variety to workouts that barbells can't provide. They are a great way to target the upper body, whether you use curl bars alone, with a rack, or as a cable machine accessory..
  • SPECIFICATIONS: Length is 47", self-weight is 22lb, load capacity is 300lb, sleeves diameter is 2", compatible with all 2 inch Olympic plates, this bar is very versatile..
  • MATERIAL: Elevens curl bar is made of solid steel with a corrosion resistant chrome plated finish, it can withstand up to 300lb of weight, which is enough for everyone except elite trainees..
  • ERGONOMICS: The Elevens curl bar is bent at a very delicate angle, and the ergonomic angle provides a more friendly wrist position when training the arms..
  • KNURLING: Knurling is a key detail that helps enhance grip. Our curl bar has a medium depth of knurling, which means you can sweat it out and maintain a good grip..
Check Stock

Olympic Barbell EZ Bar Curl Bar 4ft/5ft/7ft for 2 Inch Weight Plates, Perfect for Home Fitness (300lb/330lb/400lb/700lb/1000lb/1500lb) (Black-15lb)

  • TRAINING: Curl bars help target smaller muscle groups, such as biceps and triceps, and they can be used to add variety to workouts that barbells can't provide. They are a great way to target the upper body, whether you use curl bars alone, with a rack, or as a cable machine accessory..
  • SPECIFICATIONS: Length is 47", self-weight is 15lb, load capacity is 300lb, sleeves diameter is 2", compatible with all 2 inch Olympic plates, this bar is very versatile..
  • MATERIAL: Elevens curl bar is made of solid steel with a corrosion resistant chrome plated finish, it can withstand up to 300lb of weight, which is enough for everyone except elite trainees..
  • ERGONOMICS: The Elevens curl bar is bent at a very delicate angle, and the ergonomic angle provides a more friendly wrist position when training the arms..
  • KNURLING: Knurling is a key detail that helps enhance grip. Our curl bar has a medium depth of knurling, which means you can sweat it out and maintain a good grip..
Check Stock

Wheelchair Headrest Support System

  • Soft Headrest Pad Curved Large measures 10" Wide x 7" High x 2" Thick.
  • Multi-Axis Headrest Positioning Hardware with Standard Clamp measures 16" Long....
  • Attaches to most Wheelchair's with a Rigid Solid Back Rest.
  • Automatically includes Adjustability in Height, Depth, and Angle.
  • This item includes Everything you need to attach to a Wheelchair.
  • This Comfortable Headrest Pad is made from a Soft Memory Foam with a Machine Washable Neoprene Cover.
  • Dimensions of the Pieces that make up this Headrest Hardware: Horizontal Bar, 1" Diameter Ball, Vertical Bar, Standard Mounting Clamp.
Check Stock

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock