Reviews Aluminum Welding Rod

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

100Pcs Flux Core Welding Wire Aluminum Welding Rods 550℃/1022℉ Aluminum Brazing Rods Solution Welding Flux-Cored Rods for Samll Projects (1/16''x13'')

  • ONLY FOR WELDING ALUMINUM - The Aluminum welding flux-cored rods are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good forgeability & good corrosion resistance..
  • NO SOLDER POWDER NEEDED - The aluminum brazing rods don't need to use other flux powder while repairing aluminum..
  • HIGH QUALITY MATERIAL - The low temperature aluminum welding rods are made of premium nontoxic, odorless and durable aluminum..
  • APPLICATION - The flux core welding rods are used for welding and filling material for pure aluminum small projects, connection with aluminum bus and guide rod of electrolytic aluminum plant and electric power, chemistry and so on. The melting piont of solution welding flux-cored rods is 550℃(1022℉) ..
  • WARRANTY -- guangfan provide this product have 3-month warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

100Pcs Aluminum Welding Rods,400℃/752℉ 1.6MM*13INCH Low Temperature Solution Welding Flux-Cored Rodst,Aluminum Brazing Rods,Suitable for Aluminum Metal Welding and Repair of Aluminum Radiator

  • Low-temperature welding: The low-temperature flux core welding wire can be used for welding at temperatures as low as 400℃/752F, reducing the risk of damage to the welded material due to high temperatures..
  • NO SOLDER POWDER NEEDED: This welding wire does not require any solder powder, which makes it a convenient and easy-to-use option.
  • High strength: The use of high-quality aluminum alloys in the welding rod ensures that the welds are strong and durable. it is resistant to rust and corrosion, ensuring that your weld will last for years to come..
  • Only for Welding Aluminum - 100Pcs(19.7"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Easy To Use: Flux Core Welding Wire Is Easy to Use, Making It Ideal for Both Beginners And Professionals Alike. Its Simple Design Means That You Can Get Started With Welding In No Time..
Check Stock

Low Temp Aluminum-Zinc Brazing Rod 10/20/50Pcs 500mm x 2mm 3.5g Tube General Purpose Aluminum TIG Welding Rod No Need Solder Powder

  • 【Great Welding Effect】With full & smooth welding effect because of internal powder. With low melting point(647°~658°), great weldability and....
  • 【No Need Solder Powder】You don't have to use other flux powder with aluminum alloy as the welding core and coating as the salt base. Very....
  • 【Widely Use In Life】Suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance..
  • 【Very Wide Application】It is mainly used for argon arc welding and filling material for pure aluminum, connection with aluminum bus and guide rod....
  • 【Light Weight & Small Volume】 Size of 500 x 2mm & weight of 3.5g, very easy to bend & carry. Delivery: Ship From US, It Takes About One Week..
Check Stock

106pcs Plastic Welding Rods ABS PP PU PE PA PC TPO 7 Types of Plastic Welder Rods for Car Bumper Kayak Repair Kit with Reinforcing Stainless Steel Mesh Plastic Welding Kit Welding Supplies

  • ...e repair area, and heated with a soldering iron to melt into both sides of the crack. Then use a soldering iron to heat and soften the plastic welding rods and stick it to the stainless steel mesh and plastic body to make the welding position firmer..
  • FOIL TAPE AND SPONGE: Aluminum foil tape is an auxiliary material for welding plastics. you can first paste aluminum foil tape on the back of the plastic crack for temporary repair, which can fix the damaged position, and it is more convenient for you to weld stainless steel mesh and plastic welding rod on the front of the plastic crack. the sponge can clean the repaired welding surface. The plastic repair welding kit can be used as a kayak bumper repair kit, which is very convenient..
Check Stock

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

ARC Welder Hand Held Welding Machine Kit 110V Voltage IGBT Digital MMA Welder with Welding Gloves,Folding Welding Helmet,Welding Brush,Welding Ground wire,Welding Rod

  • 1.ARC Welder Hand Held Welding Machine Kit includes 1 ARC Welder ,1 Welding Gloves,1 Folding Welding Helmet,1 Welding Brush,1 Welding Ground wire,5 Welding Rod,Welding Toolbox..
  • 2.The MMA welder is suitable for welding stainless steel, mild steel, aluminum and other metal materials..
  • 3.The portable welding machine is very small and can be carried anywhere to work. It is easy to carry and operate..
  • 4.Hand held welding machine kit built in intelligent chip,high-speed mute ,rapid heatdissipation effect is good..
  • 5.Order with confidence. If you are not satisfied with our products, please contact us and we will reply to you within 24 hours..
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock