Reviews Aluminum Weld Wire

Amico MTS-165, 165 Amp MIG/Flux Cored Wire, TIG Torch, Stick Arc DC Inverter Welder 3-IN-1 Combo Welding, 110/230V Dual Voltage.

  • MTS-165 capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function..
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles..
  • Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending..
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine..
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control..
Check Stock

Aluminum Welder Machine 110/220V Mig Welding Equipment 210A Gas/Gasless RBM-2100D 4 in 1 2T/4T Tig Stick Mig Welding Flux Core Supports 2lbs/10lbs Wire(Need Spool Gun for Aluminum Welding)

  • [Gas/Gasless Welding Equipment] ①RBM-2100D supports gas(2/10lbs solid wire) welding,install V-shaped wire feed wheel adapts to 0.8/1.0mm wire.
  • gasless(2/10lbs flux core wire) welding,select the knurling wheel for 0.8/1.0mm wire.(the wheels are come together with machine).
  • [Spool Gun/Aluminum Welding Opinion] RBM-2100D supports welding with a spool gun(I can weld aluminum with this),please refer to the instruction manual for detail operation(spool gun is not included).
  • [ARC/TIG Welding] ARC/Stick welding is great for repairing broken fences or brackets,can weld with 3/32’’ - 1/8″6013/7018 rods.
  • Lift tig not high frequency tig, but also requires pure argon gas(tig torch is not included)..
  • [Duty Cycle] 110V-MIG: 60% at 30-140A,220V-MIG: 60% at 30-210A.
  • 110V-ARC: 60% at 30-100A,220V-ARC: 60% at 30-150A.
  • [Warranty] Buy with confidence cause Reboot provides 7*24H after-sale service,and 1-year limited warranty for this RBM-2100D..
Check Stock

AmicoPower MTS-165, 165-Amp MIG MAG Lift-TIG Stick Arc Combo DC Inverter Welder, Compatible Spool Gun SPG15180

  • MTS-165 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 1/4 inch. The MTS-165 is the most efficient machine for every task..
  • The MTS-165 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-165 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-165 is designed and manufactured according to the highest....
Check Stock

MTS-205 205 Amp MIG/TIG-Torch/Stick Arc Combo Welder Weld Aluminum MIG 110/230V Dual Voltage Welding New

  • MTS-205 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 1/2 inch. The MTS-205 is the most efficient machine for every task..
  • The MTS-205 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-205 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-205 is designed and manufactured according to the highest....
Check Stock

AMICO MTS-185, 3-in-1 Combo 185-Amp MIG Lift-TIG Stick Arc DC Inverter Welder, Compatible Spool Gun Welding Aluminum: SPG15180.

  • MTS-185 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 3/8 inch. The MTS-185 is the most efficient machine for every task..
  • The MTS-185 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-185 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-185 is designed and manufactured according to the highest....
Check Stock

AmicoPower MTS-185,Multi-function 185-Amp MIG/MAG/Flux-cored/Lift-TIG/Stick Arc DC Inverter Welder,Can weld all metals,Spool gun weld aluminum.

  • MTS-185 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 3/8 inch. The MTS-185 is the most efficient machine for every task..
  • The MTS-185 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-185 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-185 is designed and manufactured according to the highest....
Check Stock

100Pcs Aluminum Welding Rods,400℃/752℉ 1.6MM*13INCH Low Temperature Solution Welding Flux-Cored Rodst,Aluminum Brazing Rods,Suitable for Aluminum Metal Welding and Repair of Aluminum Radiator

  • Low-temperature welding: The low-temperature flux core welding wire can be used for welding at temperatures as low as 400℃/752F, reducing the risk of damage to the welded material due to high temperatures..
  • NO SOLDER POWDER NEEDED: This welding wire does not require any solder powder, which makes it a convenient and easy-to-use option.
  • High strength: The use of high-quality aluminum alloys in the welding rod ensures that the welds are strong and durable. it is resistant to rust and corrosion, ensuring that your weld will last for years to come..
  • Only for Welding Aluminum - 100Pcs(19.7"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Easy To Use: Flux Core Welding Wire Is Easy to Use, Making It Ideal for Both Beginners And Professionals Alike. Its Simple Design Means That You Can Get Started With Welding In No Time..
Check Stock

Forney 72759 4-Inch x .020 x 5/8-11 Knot Wire Wheel

  • IDEAL FOR heavy-duty cleaning applications and removal of weld scale, spatter and heavy corrosion.
  • EASY AND SMOOTH REMOVAL of weld scale, spatter and heavy corrosion.
  • WORKS BEST WITH right angle grinders and .020 wire.
  • QUICK REVOLUTION SPEED at 20,000 revolutions per minute (RPM).
  • Twist knot wire wheel brushes provide high impact.
  • These wheels are used in surface preparation prior to welding.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
  • Also great for removing weld scale, spatter and heavy corrosion.
  • Used for heavy duty cleaning applications.
Check Stock

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

HITBOX MIG Welder 200A 110V/220V Dual Voltage Color Smart LCD Display IGBT Inverter Multifunction MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine MT2000Ⅱ

  • ★ DUAL VOLTAGE MULTIFUNCTIONAL WELDER - HITBOX MT2000Ⅱwelder is dual voltage 110V/220V, with MIG/ARC/LIFT TIG gas gasless multi Functions. It came with color LCD display with make the setting parameter very easy to read. It is super easy and convenient to chose the welding mode by pressing the “Selection” button. Once choosing the mode you need, the mode will light up with its matching color..
  • ★ MIG FUNCTION - HITBOX MT2000Ⅱ welder supports gas, mix gas and gasless function. This welder can work with 0.8/1.0mm welding wire to weld 1mm-8mm thickness workpiece. When adjust the current, the wire speed and output voltage will be auto matched. Little splash, deep bath and smooth wire feeding bring you beautiful welding seam. Solid wire with gas welding stainless steel. Flux-cored wire without gas welding iron and carbon steel..
  • ★LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a WP-17V tig torch will be needed. Please kindly note that WP-17V tig torch is not included in this package..
  • ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little spatter, stable curren....
Check Stock