Reviews Aluminum Mig Wire

YESWELDER MIG-250 PRO Aluminum MIG Welder, 250Amp 220V, Gas Gasless MIG Welding Machine MIG/Lift TIG/ARC 3 in 1 Welder

  • Multi-functions -MIG synergistic setting & MIG manual setting, Gasless Flux wire MIG Welds, stick welds, and Lift TIG welds. Dynamic control-set arc control to crisp or soft depending on your preference and application. (TIG torch needs purchasing separately, WP-17V-35).
  • Synergic MIG -provides communication between the power source, feeder, and gun. Easy work with new welders or users..
  • Gasless Flux MIG welds -release hard moving of gas cylinder, release the low efficiency of stick welds, and work with gasless flux wire perfectly.
  • Various Welding Wire Suitable for all kinds of welding requirements .023”/.030”/.035” solid/SS wire, .023”/.030”/.035” flux core wire for MIG manual setting.
  • only .035” available in MIG synergistic setting .035”/.045” aluminum wire..
Check Stock

Lotos MSG095 9ft 4 Prong MIG Welding Spool Gun for LOTOS MIG140 MIG Welders (for MIG140)

  • 9ft 4 prong MIG spool gun with 1lb Φ0.9mm Aluminum welding wire installed.
  • Rated welding current: 130A@30% duty cycle.
  • Wire feed Speed: 3.2~42.7 ft/min (1~13 m/min).
  • It works for genuine LOTOS MIG welders, Longevity MIG welders, Eastwood AHP MIG welders.
Check Stock

10 MIG Spool gun fits Miller Millermatic 141/190/211 Multimatic 200/215/220 Aluminum welding

  • Weldpro's flagship 200 amp MIG welder that goes beyond MIG and Flux Core welding! AND 3 YEAR WARRANTY!.
  • The model 200 is also capable of true lift TIG welding (without foot pedal) as well as stick welding and aluminum welding with the optional spool gun.....
  • MIG,Stick or TIG weld all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A.
  • MIG welding wire diameter: .023 .030 .035, welding thickness: 19ga- 0.197 in.
  • TIG tungsten needle diameter: 0.063 0.094, welding thickness: 25ga- 1/4....
  • Dual digital display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with....
Check Stock

Weldpro 200 Amp Inverter Multi Process Welder with 3 Year Warranty Dual Voltage 220V/110V Mig/Tig/Arc Stick 3 in 1 welder/welding machine

  • Weldpro's flagship 200 amp MIG welder that goes beyond MIG and Flux Core welding! AND 3 YEAR WARRANTY!.
  • The model 200 is also capable of true lift TIG welding (without foot pedal) as well as stick welding and aluminum welding with the optional spool gun. The MIG 200 is an intuitive synergically designed MIG / Flux Core welding machine..
  • MIG,Stick or TIG weld all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A.
  • MIG welding wire diameter: .023 .030 .035, welding thickness: 19ga- 0.197 in.
  • TIG tungsten needle diameter: 0.063 0.094, welding thickness: 25ga- 1/4 in.
  • MMA electrode Dia: 0.063-0.157 acid electrode, alkaline electrode, welding thickness: 14ga-0.315in.
  • Dual digital display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication. User adjustable inductance settings..
Check Stock

Welding Skills

  • Weldpro’s flagship 200 amp multi function MIG welder with LCD display. Now with exciting new added features and easy access menus offers amazing....
  • The model 210 LCD is also capable of true lift TIG welding as well as stick welding and aluminum welding with the optional spool gun. The MIG 210LCD....
  • MIG, Stick or Lift TIG welding all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A.
  • Added new features include in MIG Mode, Run-In, Spot Weld, Gas Choice, Synergic or Full Manual controls, on screen polarity swapping for Flux Core vs....
  • Color LCD display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication.....
Check Stock

Eastwood Mig 175 Spool Gun Metal Connector Plastic Plug Push Pull Feeder Aluminum Welding Torch Gun 1 Lb Spool Of .035 Aluminum Wire

  • Spool Gun With Metal Plug Fits The Eastwood Mig135, Mig175, Mig250, And Mp250I Welders.
  • Comes Complete With A 1 Lbs Spool Of .035" Inch Aluminum Wire.
  • For Use On Machines With A Metal Plug On The Machine And Torch Lead..
  • Designed, Engineered And Tested To Eastwood Specifications.
  • Fits The Eastwood Mig175, Mig135 And Mig250 Welders.
Check Stock

Weldpro 155 Amp Inverter MIG/Stick Arc Welder with Dual Voltage 240V/120V welding machine, spool gun capable

  • ...ing the bank. The 155 GD can perform MIG, flux core and DC stick welding as well as the ability to adapt scratch TIG with the optional TIG torch available through our website..
  • This latest version of our economy minded 155 amp MIG welder now includes the ability to remove the torch cable and replace it with our aluminum spool gun. After inserting the spool gun a simple flick of the switch inside the welders drive roller housing enables spool gun operation..
  • The MIG155GD can run .023, .030, and .035 MIG and flux cord wire. No need to disconnect electrical terminals change polarities. With the Mig 155 GD changing polarity is as simple as swapping the dongle cable from plus to minus dinse connector right on the front of the machine..
  • Packaged with multiple drive rollers, both smooth and knurled for flux core welding, a reel of flux core wire, and a gas regulator for MIG welding, along with a stick welding electrode stinger, the MIG155GD is ready to handle most any DC welding needs..
  • Portable, capable and versatile, still with the ability to run 120V as well as 240V this little powerhouse is tough to beat. PDF product manual is also available on the Weldpro website. 3 Year Warranty.
Check Stock

Klutch 2-Tier Welding Cart with Locking Cabinet - 31 1/2in.L x 16 1/8in.W x 28in.H

  • ...achine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire, .035”/.045” aluminum wire..
  • SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds..
  • MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, it’s more convenient to start the next welding job..
  • REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier and more clear without taking off your helmet. Easy to ca....
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

MILLER ELECTRIC MIG Welder,120/240VAC,1 Phase

  • Price For: Each Series: Millermatic 211 Aluminum - Material Thickness: 18 ga. to 3/8" Mild Steel - Material Thickness: 24 ga. to 3/8" Stainless Steel - Material Thickness: 20 ga. to 1/4" Hz: 60 Input Amps: 17.
  • Millermatic 211 MIG Welder with Advanced Auto-Set - 907614.
  • Includes: 10 ft. M-10 MIG Gun, 10 ft. Work Cable with Clamp, Built-In Gas Solenoid Valve, Dual Gauge Regulator with Gas Hose, Sample Spool of 0.030 in. Solid Wire, (2) 0.030 in. Contact Tips, (2) Hook-and-Loop Cord Wraps, Material Thickness Gauge Overall Width: 20-1/2 inch Standards: CSA Certified Overall Height: 12-1/2 inch.
  • Features: Advanced Auto-SetTM, Auto Spoolgun Detect, Smooth-StartTM, Angled Cast-Aluminum Drive System, Quick SelectTM Drive Roll, Thermal Overload Protection, Fan-on-Demand Phase: 1 Input Voltage: 240VAC Welded Material: Aluminum, Steel Output Range: 30 to 230A DC Welding Processes: MIG/Flux Core Portability: Handheld Portable Application: Maintenance, Repair, Auto/Cycle Shops, Farm and Ranch Jobs, Hobby Welding.
Check Stock