Reviews Aluminum Machine Parts

Vanell Mini Manual Heat Press Machine 350kg Max Down Force Hot Presser 3 X 2 Inch Heat Platen LCD controller 300W Shirt Heat Press Transfer Sublimation Press Machine

  • Herb Drying & Oil Extraction Heat presser heat platen: 1.2-inch thick solid aluminum made heating element, 3x2inch Platen, 0~250/485 Temperature Range, 2~5 Temperature Difference.
  • The clamshell heat presser is able to generate 350kg/ 770lb force and work perfectly, Digital Control Panel, Aluminum Heating Element.
  • CE (EMC, MD, Rohs)/ UL certified spare parts: spare parts used on prior heat presses are either CE or UL certified, which remains stable working condition and lower fail rate.
  • Attention: Before Using, you need to increase the pressure by using the pressure adjustment wrench to adjust the pressure nut. Please kindly noted that do not adjust the pressure very large, this may cause the machine problem like handle broken, and will influence the heat press machine service life.
Check Stock

FoxAlien x WoodMads WM-3020 CNC Router for Metal Caving, 300W Spindle Linear Rails and Ball Screws 3-axis Milling Engraving Machine for Aluminum Copper Wood Acrylic

  • [Outstanding Precision and Accuracy] The WM-3020 CNC machine is equipped with HG-15 linear bearings and 12mm balls crews on all 3 axes. These industrial components enable the carving to be faster, quieter, and more stable and precisely..
  • [Multiple Spindle Options] WM-3020 comes with a 300watt spindle, which is capable to engrave and cut wood, acrylic, carbon fiber, aluminum and brass. The z-axis is compatible with 65mm and 69mm spindle clamp, which means it is compatible with the trimmer routers such as DWP611, RT0701C, engraving module, and 1.5kw spindle..
  • [Aluminum Spoilboard with Scale] One-piece aluminum spoilboard enhances the flatness and strength. The scale is convenient for measurement and positioning. It is compatible with most of the hold-down clamps in the market..
  • [Grbl Open-source Based] The control board uses a 32-bit chip and is based on Grbl. It supports to set homing origin to any corner by editing the Grbl configurations..
  • [Main parts pre-assembled] Main parts are pre-assembled. It just takes 30-45 minutes to fully assemble the machine. It is made of all aluminum, which is sturdier and more stable. All necessary accessories for trial run are included in the package..
Check Stock

Katzco Magnetic Mini Tray Holders - 4 Pack Multi Color - Use in Garage, Home, Construction - for Nuts, Bolts, Washers, Iron, Nails, Screws, Sockets, Bits, Etc. - 4 Inch Diameter x 1-1/4 Inch Depth

  • HIGH QUALITY CONSTRUCTION- Heavy-gauge polished Aluminum construction Base bowl with strong magnetic built into the base- Includes 4 trays for more organizational flexibility, This bench top accessory keeps small parts accessible and all in one place..
  • HOLDS SMALL PARTS- The magnet parts bowl will hold any small steel or ferrous metal object. Keeps nuts and bolts, parts, and small tools within reach of work area..
  • RUBBER COATED BOTTOM -Base has a rubber bottom coated magnets to prevent marring of painted to finished surfaces , You can Mount The tray horizontal or even vertically or up-side-down..
  • IDEAL FOR STORAGE- Keeps small metal parts and tools from getting lost Great addition to any workshop Holds Small Parts securely, Helps prevent lost or misplaced parts, fasteners, and tools Screws for nuts, bolts, screws, nails, needles & thimbles..
  • EXTRA MAGANATIC- 4 1/4″ diameter Aluminum steel tray Hold Adheres to any ferrous metal surface Attach the bowl to any metal machine in your shop to hoods, fenders, or other ferrous metal surfaces Even works sideways and upside down..
Check Stock

PrimeWeld MIG180 Mig Welder, 180 Amp Wire Feed Welding Machine With Dual Voltage 220v, 110v

  • ...se than other welding methods. The MIG180 allows you to create excellent, intricate welding designs..
  • Amazing Performance - The MIG180 gives you three different welding processes. Like most MIG welders, you can run flux-core wire without gas using the same equipment as you do for MIG with gas. This machine also adds aluminum welding and includes an electrode holder for stick welding into your shop's arensal..
  • Aluminum Welding - Welding aluminum can be impossible without the proper equipment. PrimeWeld MIG180 solves the problem with its own special spool gun to alleviate any kinks or jams..
  • Multiple Features - This welder machine has dual 120/240 volts input and can be used as a DC stick welder (MMA), flux core welder (FCAW) and of course a MIG welder (GMAW). The Mig180 comes ready to use right out of the box! Drive Rollers for MIG and Flux are Included. This machine Also takes standard Tweco Consumables..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your MIG180 MIG Welder Machine, simply reach out to Customer Support and we'll make things right for you! All Employees, Parts and Customer service Is located in the USA!.
Check Stock

LuckyHigh Electric Dual 4-1/4' Polisher Buffer Bench Top Machine Variable Speed Mini Jewelry Bench Polisher for Jewelry, Wood, Silver, Amber Polishing

  • This buffer is used for polishing jewelry, aluminum, chrome, acrylic dental materials, metal parts or plastic parts..
  • This bench polisher has variable speed dial. Adjustable speed range 2000 -7000RPM(without any accessories). Different speeds to polish different materials..
  • The 2 black bonnets (Spindle Sleeves) are marked with “L” and “R”. “L“ bonnet (Spindle Sleeve) should be installed at left side of the machine, “R” bonnet (Spindle Sleeve) should be installed at right side..
  • This buffing machine is made with a stable cast iron base. The 4 rubber feet of the buffing machine keep it on a table or any workbench stablely..
  • This polishing machine comes with two tapered spindles for holding buffs and brushes up to a 4-1/4″ (108mm) in diameter..
Check Stock

Mini Induction Heating Machine 110V 1000W 10 Coil Kits Auto Use Bolt Removal Tool PDR Car Garage Repairing Flameless Handhled Electromagnetic Induction Heater

  • 【CAR REPAIRING】 Preheat become attached or rusted fasteners and parts that need to be separate e.g.Removing rust from metal and car body by high-speed heating parts, and flaking rust. Removing paint coating to a metal surface or body cars.Heating the surface of the hood or other surfaces to be coated vinyl.Straighten small hail and other similar dents without painting paint layer without breaking the car, Removal of Strip on auto body parts when you restore or straightening..
  • 【REMOVE FIXTURES】Removing glued on painted metal spoilers, moldings, stickers.Snyatie small laminated glass sealants for metal..
  • 【BURNING SILENT BLOCKS】 Pressed on beams running gear or other machinery and equipment..
  • 【HEAT TREATMENT】 Heat treatment of metal parts,hardening,tempering,normalizing. Be attention: the machine can't heat Copper and Aluminum..
  • 【WARRANTY】One year quality assurance, Due to power limitation, the machine has overheat protection device, usually 2-3 minutes will stop heating.
Check Stock

1-1/8\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

1-1/2\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • ✿ 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • ✿ 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • ✿ 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • ✿ Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • ✿ The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

Snaool Snap Press + 1000 Sets Original Snap Buttons + Size 20 Dies Set,Snaps for Clothing,Plastic Snap Fastener,No-Sew Button,Plastic Snaps Tool

  • 1 KST-02 Hand Press Machine + 1 Size 20 (T5) Plastic Snap Button Dies Set + 1,000 Sets ( 50 Sets *20 Colors) Plastic Snaps + 1 Awl.
  • Most trusted brand plastic snaps,which are Lead Free. 20 Colors & 2 sizes in the package. Size 20 is commonly used, size 20 extra long prong can be....
  • Our KST-02 Press Machine is made of Aluminum + Metal,which is bigger,but lightter, it's easy to be taken everywhere. And the press machine's color is....
  • 1000 Full Sets Snap Buttons, each set contains 4parts: 2 caps + 1 socket + 1 stud. Sizes & Colors Details in the picture.18 Colors * 50 Sets Size 20....
  • Important--How to use:  Our Press Machine is made of Aluminum + Iron Alloy. It has the advantage of being pretty big but light.....
Check Stock

10 Pieces 1/2\ Aluminum 6061 Round Rod 14\ Long +/-.07\ Solid T6 Lathe Extruded Bar Stock .50\ OD

  • 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock