Reviews Aluminum High Temperature Cable

HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat

  • ...all and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

HEATIT HISD 12-feet Pipe Heating with Built-in Thermostat, Black

  • ... in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black

  • ... in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

Permatex 09128 Copper Anti-Seize Lubricant, 8 oz.

  • Prevents seizing, corrosion and galling where high temperature conditions exist.
  • Fortified with high quality rust and corrosion inhibitors.
  • Suggested Applications: Spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts, oxygen sensors, knock sensors, thermostat housing bolts, fuel filter fittings and battery cable connections.
Check Stock

DEWENWILS Roof Heat Cable, 6ft Heat Tape for Pipe, Gutter, Roof, Self-Regulating Cable Pre-Assembled, UL Listed

  • ...tall and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

Qmark WHT500 Utility Heater for Use in Well Houses, Utility Rooms, and Areas with Pipes and Machinery, 500 Watt, 240 Volt, Beige

  • ...tall and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

Multi Charging Cable, [2Pack 4FT] 3 in 1 Charging Cable Multiple USB Cord Nylon Braided Charger for IP/Type-C/Micro-USB Compatible with Most Cell Phones/Tablets/Samsung Galaxy/and More

  • 【More Durable】- Nylon braided multi charging cable is more flexible and durable, which can withstand more than 20,000 times bending tests. 3D aluminum connector and exclusive laser welding technology can ensure that the metal part will not break, high-quality aluminum shell makes the cable more durable, high temperature resistant, and corrosion resistant.
  • 【Universal Compatibility】- The 3-in-1 multi charging cable compatible with Phone 13/12/11/11Pro/XS /XS Max/XR/8/8 Plus/7/7 Plus/6/6 Plus and Pad Air/Mini, Galaxy S10/S9/S8/S6/S4/Note 9/8, LG G5/G6/V20, Google Pixel, Google Nexus 5X 6P, Huawei P9/10, Lumia 950/950 XL, OnePlus, HTC, iPad, Sony, and other Type-C and Micro devices.
  • 【What You Get】- 2-Pack of 3-in-1 multi phone charging cable with 30-day free return and 12-month worry-free warranty.
Check Stock

EP 16/2 Low Voltage Landscape Lighting Wire, Outdoor Direct Burial Cable, 250 Feet

  • [100 FEET LOW VOLTAGE CABLE] - 12AWG*2C (0.254mmBC*65 pure copper wire), Black, maximum working voltage: 300V, great for uses with 30 volts or less, Flexible and easy to strip.
  • [DIRECT BURIAL & TANGLE-FREE] - Waterproof, dust and dirt resistant, rated for direct burial, Withstanding prolonged sun exposure, Weather resistant. Rated temperature: 140°F, neither cracking at the high temperature, nor turning hard in the cold, offering long-lasting durability.
  • [100% PURE COPPER WIRE] - Pure copper conductors are more flexible, higher conductivity and lower resistance compared to CCA(copper clad aluminium). Lower resistance of copper reduces the risk of fire due to overheating of the cable. Copper is also much stronger than aluminum and will not breaks easily during installation.
  • [LOW VOLTAGE APPLICABILITY] - Lighting cable is suitable for low voltage outdoor uses such as accent lights, path lights, spotlights, garden accessories, outdoor speaker, solar panel and so on.
  • [QUALITY & SAFETY] - RoHS compliant, Fire-proof level: VW-1 with the guarantee of quality and lifetime satisfaction.
Check Stock

Loctite 555336 Copper Anti-Seize Lubricant Brush Top, 8-oz.

  • A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist.
  • Typical applications include spark plug threads installed in aluminum, exhaust manifold bolts, engine, bolts, thermostat housing, fuel filter fittings, oxygen sensors and battery cable connections.
Check Stock

DEWALT Cable Crimping Tool, Dieless (DCE350M2)

  • The cable crimpting tool has #8 - 750 McM Cu / 750 Al crimping capacity for copper and aluminum cable and connectors.
  • Crimp Connect software of the battery cable crimping tool provides detailed reports of work done.
  • Onboard diagnostics of the cable crimper indicates battery life successfully completed cycles, service needed, and operating temperature range.
  • Guard rails help to protect crimping head when crimping small diameter cable.
  • Bright LED light helps to illuminate work area.
Check Stock