Reviews Aluminum Fabrication Metal Part

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 20 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

HPS AST-138 6061 T6 Seamless Aluminum Round Straight Tubing, 16 Gauge, 1' Length, 1-3/8' OD, 0.065' Wall Thickness

  • Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
  • Commonly used in industrial, automotive, marine and aerospace industry.
  • Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.
Check Stock

Zerodis Double Head Sheet Cutter Metal Nibbler Cutter Electric Power Drill Attachment Portable Nibbler Cutting Tool

  • 【High Quality】This metal nibbler cutter is made of metal and plastic material, , strong and durable. Can be used on 8mm 1500~3000RPM electric drills or pneumatic drills..
  • 【Practical】This cutter can cut stainless steel sheet, iron sheet, aluminum and copper sheet, etc. Convenient alternative to traditional electric pneumatic nibbler..
  • 【Cut Different Shapes】Double cutting heads are adjustable, allowing you to cut in any direction you want. With this cutter, you can cut out straight line, curve line, arc line or many other irregular lines and shapes..
  • 【Application】Its ergonomic designed handle is comfortable to hold and labor-saving. Portable and compact, suitable for car repair and maintenance and metal sheet productions..
  • 【Guarantee】Quality checks strictly in every section du the fabrication. If you have any questions about our product, please contact us. We will be very happy to answer questions and resolve problems for you..
Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

  • MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
  • GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
  • REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
  • VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
  • PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..
Check Stock

Makita 5 Pack - 4.5" Grinding Wheel For Grinders - Aggressive Grinding For Metal - 4-1/2 x 1/4 x 7/8-Inch

  • ...carbon steel, structural steel, iron, steel pipes and alloy steel over an extra-long life span due to Makita’s High-performance Brown fused Aluminum Grain and hard bond matrix | Synthetic Resinoid Bond is ideal for fast stock removal, high operating speeds and aggressive grinding action used by professional metal fabrication, auto shops, maintenance repair, construction & general industrial applications.
  • ✅ AVOID Premature Disintegration, Wheel Shatter, & Injury with lower priced wheels by relying on Makita’s proprietary strong bond matrix that binds Premium White Aluminum Oxide with Phenol Resin allowing for optimal grain wear which yields smooth grinding PERFORMANCE, AGGRESSIVITY & BALANCE, grinding longer and faster than other wheels in its class.
  • ✅ QUICKLY REMOVE General Steel, Metal & Weld Stock with Makita’s Coarse 24 Grit Grains | Quality Assured, Aggressive and Long Life Wheels for consistent performance in the most demanding applications.
Check Stock

A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Silver

  • Silver Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening.
  • Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads.
  • Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings.
  • 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum.
Check Stock

A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black

  • Black Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening.
  • Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads.
  • Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings.
  • 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum.
Check Stock

HZXSDEG Soapstone Holder with 16 Pcs Soapstone Pencil Refills, Flat Soapstone Pen, Markers, Natural Soapstone Chalks

  • 【Premium Material】Soapstone refills are made of natural white soapstone. They are uniform in texture and size. Will not contaminate welds and easy to wipe off when desired..
  • 【 Widely Use】Perfect for any slate, tiles, metal, asphalt and many more surfaces, also works on chalkboard, does't break as easily as my other same stonepen cut..
  • 【Perfect Function】This Soapstone Pencil Kit are excellent for your marking needs. Make Perfect Markings for welding, metal fabrication, and construction, perfect tool for Marking Steel, Iron, and Aluminum..
  • 【Package Includes】1 Soapstone Holder and 14 pcs Soapstone Pencils Refills, IN CASE THERE ARE SOME DAMAGED PENCILS DURING DELIVERY, WE USE 2 SMALL ELASTIC BANDS TO FIX THE PRODUCT..
  • 【After Sale Service】If you’re not satisfied with the product, you can return the product and get refunded quickly..
Check Stock

Hobart H222106-R19 2-Pound E71T-11 Carbon-Steel Flux-Cored Welding Wire, 0.030-Inch

  • Particularly On Thin-gauge Mild Or Galvanized Steel.
  • Typically Used For Light Structural, Machinery Part Fabrication, Prefab Construction, Railroad Car Repair, Short Assembly Welds, Tanks And General Fabrication.
Check Stock