Reviews Aluminum Alloy Tube

RUNCL Fishing Hook Remover, Long Nose Hook Extractor, Fish Release Tool for Saltwater/Freshwater, Ice Fishing Dehooker, 10.6/13.6 Inch

  • 【10.6" Aluminum Alloy Long Nose Fish Hook Remover】: Our this fishing hook remover equipped with longer nose than needle nose pliers, can reach deep into the fish mouth, never worry about injury. The aluminum alloy tube is much more firm and durable than plastic ones. Size: Total Length: 10.6inch(27cm), Tube Length: 9inch(23cm).
  • 【Squeeze Out Fish Hook Extractor】: The fishing hook extractor constructed with spring-loaded trigger handle, makes it more convenient to take off fishing hooks with only just one hand even in a wet or cold situation, easy to work with.
  • 【Stainless Steel Rounded Hook】: The removal hook is designed to be more rounded, less harm to fish mouth and fishing line. And there're two small groove on the tube opeing, help to fix the fish hook firmly and avoid slippage. Stainless steel material avoid rust and keeps a long last life time.
  • 【Widen Hollow Out ABS Handle】：Ergonomic design, features in widen handle with anti-slip rubber strips, offers a solid grip even with wet hands.
  • the hollow-out handle made of high strength ABS significantly reduces the weight without sacrificing strength and....
Check Stock

Digital Microscope Extension Tube, See Entire Coin, Extender Pole for Elikliv DM10 DM9 DM5 DM4

  • 【Microscope Extension Tube, See the Entire Coin Clearly】 This extension tube can extend the length of the digital microscope stand. It can obtain a wider and higher field of view under microscope observation. Very suitable for coin and stamp inspection..
  • 【Compatible with Most LCD Digital Microscopes】Elikliv extension tube is compatible with Tomlov, Elicliv, Opqpq or other brands of digital microscopes.
  • 【Sturdy Aluminum Alloy Material】 It is made of aluminum alloy material, which makes this extension tube durable and beautiful. Strongly support your digital microscope.
  • 【Small and light】 The length of the microscope extension rod is about 6 inches (15.2 cm), and the net weight is about 5.3 ounces (220 grams). Light weight, easy to carry and store.
  • 【Easy installation】 Just screw the extension tube to the digital microscope. With extension rods, you can easily achieve higher-angle digital microscope view.
Check Stock

VEVOR Copper Pipe Bender, 7 Colorful Dies 1/4-7/8 inch 90 Degrees Forward and Reverse Bending, 6-22 mm for Copper & Aluminum Tubes with Reverse Bend Attachment

  • ...forward and reverse to 90 degrees. It allows tight 90-degree angles to be made easily out of a wall or other difficult places. Mechanical ratchet for fast and precise bending..
  • 1/4"-7/8" Bending Range: We provide 7 colorful interchangeable tube bender dies, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy for durable use. The bending heads can meet different usage needs, making your work more convenient..
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good processing performance is widely used and sturdy for long service life..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, and hydraulic systems..
Check Stock

IBOSAD HVAC Hydraulic SWAGING tool kit for copper tubing Expanding 3/8 inch to 1 1/8 inch

  • Made of aluminum alloy,very portable,Easily Swage on the job..
  • Suitable for Used for soft copper tube, Aluminum tube, Titanium tube, soft steel and other soft tube.
  • Comes with 7 dies ranging with 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1 1/8″.
Check Stock

20Inch Bike Fat Air Fork Snow/Beach Bike Fork Double Shoulder Air Gas Suspension Magnesium & Aluminum Alloy Spread 135mm Fit 4.0’’Fat Tire

  • Material: Magnesium and Aluminum Alloy , sturdy and durable..
  • Size: Travel:140mm, straight tube : Aluminum alloy Φ28.6x230mm (1-1/8), Spread 135mm..
  • Features: Rebound adjust, Lock-out system, Air spring..
  • Steady: The inner tube diameter is 34mm, stronger than the previous 30/32mm inner tube, steady and sturdy..
  • Suitable for:20 inch Snow/ Beach Bike - 4.0" Tire, E-Bike, etc..
Check Stock

Antstone 1/4” 3/8” 1/2” O.D. Tubing Bender 3 in 1 Tube Bender 180° HVAC Copper Aluminum Tubes Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for soft copper / aluminum tubes.
  • applicable tube outer diameter: 1/4"、3/8"、1/2".
  • applicable wall thickness: 0.027”-0.059”(0.7mm-1.5mm).
  • bending radius: 0.82”, 1.14”, 1.43”(21mm, 29mm, 36.5mm).
  • [3-in-1 Design] - The tube bender is a 3 in 1 tool and will fit 1/4", 3/8", 1/2" outside diameter tubes..
  • [High Quality] - High-quality alloy aluminum body, which is lightweight and durable. (NOTE: if the tube wall thickness < 0.059”, it may be damaged.).
  • [Professional Design] - (1)Aluminum alloy material makes it light and portable.(2)The soft rubber handle provides a comfortable grip..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

IBOSAD HVAC Hydraulic SWAGING tool kit for copper tubing Expanding 3/8 inch to 1 5/8 inch

  • Made of aluminum alloy,very portable,Easily Swage on the job..
  • Suitable for Used for soft copper tube, Aluminum tube, Titanium tube, soft steel and other soft tube.
  • Comes with 11 dies ranging with 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1 1/8″, 1 1/4″,1 3/8″,1 1/2″,1 5/8″.
Check Stock

Heyiarbeit RC Antenna Tube Green with Green Mount and Cap for RC Boat 5pcs

  • 【Parameters】- Tube Inner Diameter: 2mm/0.08".
  • Material: Plastic Tube, Aluminum Alloy Mount.
  • 【Good Material】-The antenna base is made of high-quality aluminum alloy material, waterproof, wear-resistant, corrosion-resistant, sturdy and durable.
  • The antenna tube is made of high-quality plastic, sturdy and durable, and has good flexibility, It protects the fragile receiving antenna and protects the antenna from damage, Won't break in a collision.
  • 【Easy to Use】-This antenna tube is easy to trim and use, you can cut it to fit the size, well-made, durable, very suitable for protecting your antenna.
  • antenna base can be used as a good support for the transmitting antenna, which helps to fix the receiving antenna at a proper angle to obtain the best signal.
  • 【Application】- RC antenna mount is compatible with DIY RC model, such as RC boat, RC vehicles and so on.
  • 【Package Contents】- 5 pcs x RC Antenna Mount +5pcs x Antenna Tube.
Check Stock

IBOSAD HVAC Hydraulic SWAGING tool kit for copper tubing Expanding 3/8' inch to 1 1/8 inch

  • If can’t work after receive the goods,please follow the vedio to operate..
  • Made of aluminum alloy,very portable,Easily Swage on the job..
  • Suitable for Used for soft copper tube, Aluminum tube, Titanium tube, soft steel and other soft tube.
  • Comes with 7 dies ranging with 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1 1/8″.
Check Stock

HMANE γ-Shape Stirling Engine Kit for Adults, DIY Unassembled Retro Generator Model Science Educational Toys with LED Lights, Bronze

  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service life. The quartz glass cylinder is high temperature resistance and fracture resistance. Easy to assemble and has collection value. It can be used as a decoration or as a school experiment item. Package list: 1 stirling engine.
  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service life. The quartz glass cylinder is high temperature resistance and fracture resistance. Eas....
Check Stock