Reviews Altin End Milling Cutter

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
  • Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..
Check Stock

7pcs/Set Roughing End Mill HSS CNC 4 Flutes Milling Cutter End Mill Router Bit Roughing Chipbreaker Tool M6/M8/M10/M12/M14/M18/M20

  • MATERIAL: 4 flutes milling cutter end mill is adopted of high quality high speed steel for durable and long serving life.
  • EFFICIENCY: End mill cutter has good milling and cutting performance, ensure the high efficiency of the work..
  • HIGH QUALITY: Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board, the surface is clean, neat, no glitches.
  • LONG LASTING: High strength, resistance to bending, breakage resistance, and have excellent physical properties, long tool life.
  • APPLICATION: Cnc router bits are suitable for CNC data processing center, carved, high-speed machines.
Check Stock

CNC Milling Cutter, Fulte Milling Cutter for Professional Use for Workshop Processing for Factory for Electronic Components

  • Completely worn and durable, making a strong guarantee for the service life of the milling cutter to ensure that the cutting sharpness is longer..
  • This 4 flute end drill uses micro‑grain tungsten steel base material, which has higher wear resistance and strength..
  • The tool is an exclusive milling cutter for high‑strength high‑speed cutting applications..
  • This cutting edge is acute and the exterior is free of burrs, making it easy to operate..
  • The ultra‑fine carbide materials can ensure its engraving and milling performance..
Check Stock

CNC Milling Cutter, Portable Fulte Milling Cutter for Electronic Components for Professional Use for Factory for Workshop Processing

  • Completely worn and durable, making a strong guarantee for the service life of the milling cutter to ensure that the cutting sharpness is longer..
  • This 4 flute end drill uses micro‑grain tungsten steel base material, which has higher wear resistance and strength..
  • The tool is an exclusive milling cutter for high‑strength high‑speed cutting applications..
  • This cutting edge is acute and the exterior is free of burrs, making it easy to operate..
  • The ultra‑fine carbide materials can ensure its engraving and milling performance..
Check Stock

Chamfer End Mill 3 Flute Chamfering Router Bit 90° Tungsten Steel CNC Polishing Carving Tool for Small Cutting Amount(D3*90°*50L)

  • 3 FLUTES: The chamfering knife is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
  • ONE-PIECE DESIGN: The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • EASY TO USE: The milling cutter bit dopts professional chamfer design, which can polish and engrave the workpiece without unloading..
  • STANDARD SIZE: The end mill chamfer bit has standard size and can be used as an aluminum‑copper milling cutter tool and an engraving milling cutter head..
  • APPLICATION: The chamfering tool is compact design, easy to carry and store, mainly used for 90° chamfering or taper hole processing on the workpiece..
Check Stock

5PCS 1/2' Carbide Square End Mill Bits Set, Milling Bits Cutter 1/2 Carbide End Mills for Alloy Steels/Hardened Steels, HRC 45 Deg Single End 4 Flute AlTiN Coating

  • Package Included: 5pcs 1/2" carbide square end Mill.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel..
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance..
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron..
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining..
Check Stock

CNC Milling Cutter, Compact Durable Fulte Milling Cutter for Workshop Processing for Factory for Professional Use for Electronic Components

  • Completely worn and durable, making a strong guarantee for the service life of the milling cutter to ensure that the cutting sharpness is longer..
  • This 4 flute end drill uses micro‑grain tungsten steel base material, which has higher wear resistance and strength..
  • The tool is an exclusive milling cutter for high‑strength high‑speed cutting applications..
  • This cutting edge is acute and the exterior is free of burrs, making it easy to operate..
  • The ultra‑fine carbide materials can ensure its engraving and milling performance..
Check Stock

xiji T-Slot Milling Cutters, 16mm Cutting Dia 8 Flutes HSS T Slot End Mill High Speed Steel Keyway Knife HSSAL Straight Shank T Slot End Mill Keyway Cutter Woodruff Keyseat Set, 1pcs

  • PREMIUM MATERIAL: This T Slot Cutter End Mill is made of high quality high speed steel (HSSAL) material, wear resistant and not easy to stick cutter. Woodruff key seat cutter can facilitate CNC processing and improve work efficiency..
  • FEATURES: It Is A Special Tool For Processing T-Slots. The End Edge Of The Milling Cutter Has A Suitable Cutting Angle. The Cutter Teeth Are Designed According To Helical And Staggered Teeth, And The Cutting Is Stable And The Cutting Force Is Small..
  • ADVANTAGE: The cutting edge is sharp and wear-resistant, it is not easy to break the edge, the surface is clean and free of burrs, and the finished workpiece has high smoothness. After The Straight Slot Is Milled, The T-Slot With The Required Precision Can Be Milled At One Time..
  • DURABLE: The high-frequency welding process is adopted at the connection between the cutter head and the cutter body, which is durable and not easy to break the knife, which greatly improves the practical life of the cutter. T‑slot cutter has stable structure, excellent performance and long service life..
  • WIDE APPLICATION: Used To Process T-Shaped Grooves On Various Mechanical Tables Or Other Structures. Suitable for milling steel, aluminum, copper, iron and non ferrous materials. It Has Sufficient H....
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
  • This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill router bits are used for side milling, end milling, finish machining, etc..
Check Stock