Reviews Alloy Shaft Part

4Pcs 1:10 RC Car Drive Shaft Front and Rear Universal Axles Drive Shaft CVD Heavy Duty Compatible with 1/10 Traxxas Slash 4X4 Rustler VXL 4WD Replacement Parts (Gray)

  • ▶Compatibility: 4Pcs front and rear drive shaft CVD heavy duty replacement parts, compatible with 1/10 scale Traxxas Slash Platinum/Ultimate/VXL 4x4 4WD, Hoss 4X4 VXL, Rustler 4X4 VXL, Stampede 4X4 VXL etc..
  • ▶Update Material: CVD drive shaft made of high-quality metal materials: middle part and wheel hex adaptor is made of 6061-T6 alloy, axle part is made of update material Q235 Carbon steel, ensuring maximum durability and for long time service life..
  • ▶Performance: Ingenious design, professional manufacturing and fine workmanship, high reliability, ensuring smooth transmission..
  • ▶Separate use or use together: Good compatibility, suitable for most 1/10 traxxas rc car models, you can separate these front and rear drive shaft CVD or use them together according to your needs..
  • ▶Easy to install: these rc cars drive shaft CVD comes with Screws and nuts and easy to use, you can directly use them on your RC car model. If you have any questions during use it, please contact us anytime..
Check Stock

GPM for Traxxas Slash 4X4 / Slash 4X4 LCG / Slash 2WD F-150 / Stampede 4X4 VXL Upgrade Parts Stainless Steel 304 + Aluminum Rear CVD Drive Shaft with Steel Wheel Hex - 1Pr Set Red

  • Product Name : Stainless Steel 304 + Aluminum Rear CVD Drive Shaft With Steel Wheel Hex - 1Pr Set.
  • Axle joints are made with stainless steel 304, more sturdy and not easy to rust. Special design on the axle joint, the joints are protected and wrapped inside the axle. Aluminum shaft body made from alloy 6061T6 material which is light weight with high tensile strength. The drive shaft is desgined slightly thicker than the original for longer durability. Silicon O-rings are inserted at the axle joint to minimize the impact on the CVD when landing on ground..
  • Accessories included : 3mm Steel Hex Shim-2pcs.
  • Original stock part number : 6828X + 6850X + 6853X..
  • Will fit : Traxxas 1/10 Slash 4X4, Slash 4X4 LCG (68086-21), Slash 2WD Ford F150 Raptor, Stampede 4X4 VXL.
Check Stock

Lionscool EZ Curl Bar, Olympic Curl Bar 2 Inch with 2 Barbell Collars, 47 inch(350lb/700lb Weight Capacity Available), Excellent for Biceps and Triceps (Black 28mm)

  • The Curl Bar That Wows: This version of the LIONSCOOL Curl Bar has been upgraded with a 28mm diameter for an superior grip, and ultra-strong 87k PSI alloy steel to handle all your demands..
  • 28MM Comfortable Curved Shaft: As one of the most critical areas of a curl bar, the bent shaft of this bar is comfortable and very effective. The cambered angles on LIONSCOOL EZ Curl Bar place your hands in a more natural position that lessens elbow and wrist strain. More importantly, the diameter of the shaft has been upgraded to 28mm, providing a firm grip and exeptional comfort..
  • Knurling Design: The LIONSCOOL EZ Curl Bar features a 1.2mm standard diamond knurl without being too aggressive, which provides an ample and superior grip for sweaty hands. The bar has two sections of knurling totaling 15 inches, both are fully covered through the curves. It gives you a solid grip for any movement from curls to rows..
  • Smooth Performance: Most curl bars are only bushing-operated, but not with us. With one premium ball bearing and one self-lubricating brass bushing per sleeve, this LIONSCOOL Curl Bar provides the perfect combination of spin and....
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

Warrior Burn Pro Attack Carbon Lacrosse Shaft

  • More durable. -- Metal 3 Pro goalie shafts feature an improved alloy and smarter construction to make them stronger while reducing extra weight to keep your hands fast..
  • Improved alloy. -- Better manufacturing makes the Metal 3 Pro alloy stronger, and the refined taper means your shaft stays light but strong where it needs to be..
  • Better options. -- Metal 3 Pro goalie shafts come in multiple strength and weight options so you can focus on faster hands or a tougher shaft to match your playing style..
Check Stock

Flex Shaft 6mm Shank,Metal Flexible Shaft for Wood Carving Knife Chise Grinder Tool with Hex Wrench,100mm/3.93 Inch(Length)

  • FOREDOM FLEXSHAFT SET MOTOR MAINTENANCE KIT S-93 INNER SHAFT & S-77 OUTER SHEATH.
  • FOREDOM FLEX SHAFT MOTOR PARTS INNER SHAFT & OUTER SHEATH FOREDOM "Original" PARTS - SET OF REPLACEMENT PARTS These are original Foredom Flex Shaft replacement parts, used for the maintenance of your Flex Shaft Motor. Sale is for the set inner and outer replacement parts. The Outer Sheath measures 36-1/4" long, standard material outer sheath comes equipped on most of the standard models. FOREDOM Item Number: S-77 NOVELTOOLS # 0616-77 The Inner Shaft Cable the standard KEY TIP SHAFT, a 39" long inner shaft is used to replace broken or worn shafts. FOREDOM Part Number S-93 NOVELTOOLS # 0616-93 NOTE: Shaft should be greased when replacing part. Please see our store for 1oz Tube of Grease..
Check Stock

Aluminum Electronic Guitar Potentiometer Knobs for 6 mm Diameter Shaft, Volume Tone Knob, Bass Knobs 25mm Dia. x 15.5mm Height 2 Pack (Blue)

  • Dress up your guitar or bass! With knurled grip texture, these flat-top knobs are an eye-catching customization. Compatible with most electric guitars or basses, lap steels and other instruments..
  • [Long lasting durability] Made of corrosion-assistant aluminium Alloy with exquisite Oxidation coating that won't fade over time. Available in Silver, Black, Red, Blue. Full aluminium alloy structure and always hold tight even when control the high torque..
  • [Size and Fitment] 0.61" tall x 0.98" diameter (15.5mm x 25mm). Fit 6mm solid shaft pots, and both fine or coarse-knurled split shaft pots..
  • [Easy to Install] Simply slide the knob onto the shaft for smooth shaft potentiometer and then use the wrench to tighten the set screw against the shaft. When installing on a split shaft pot you need to tighten the set screw in line with the split..
  • Beefy, large diameter shape allows for easy and quick adjustment of the controls..
Check Stock

Aluminum RC Shocks for 1/10 Traxxas Slash 4x4 2WD Rustler 4X4 VXL Shocks Stampede 4X4 Shocks Hoss 4X4 Monster Truck,Front & Rear Replace 5862 4PCS Navy Blue

  • The RC shocks are Perfect Compatible with:1/10 Traxxas Slash 2WD / 4x4, Stampede 2WD / 4x4 VXL, Rustler 4x4 VXL / 2WD, Ford F-150, Hoss 4X4, Bandit RC....
  • The shock body made of 6061-T6 aluminum alloy, the shock shaft made of hard steel, the rod end made of quality plastic, Heavy duty, durable and....
  • Good choice of Big Bore Shock Set. Replacement of stock part 5862 (These Shocks come without pre oiled so make sure you get some before installing.).
  • Package include: 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total....
  • Gohobby Quality Guarantee- 100% custumers satisfaction warranty.
Check Stock

Mr. Heater F232010 MH9BX Buddy 4,000-9,000-BTU Indoor-Safe Portable Propane Radiant Heater (Green)

  • Temperature Fuel Control Knob (23.5mm shaft) for MH9BX Mr. Heater Portable Buddy Propane Heaters (mfg 2009-Present), Part #32017.
  • This knob has a 23.5mm OD shaft size. Please measure outside diameter of knob shaft for proper fit..
  • For use on Mr. Heater, Heat Star, and Enerco MH9BX (mfg 2009 through Present) Portable Buddy Propane Heaters..
  • (*Use Part #73418 knob for heaters manufactured prior to 2009, where the knob has 12.7mm shaft base*.).
Check Stock

Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T

  • Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle..
  • Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
  • Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
  • OEM Fit, Quality, Finish - While this is not a genuine....
Check Stock