Reviews Alloy Hydraulic Bending

Antstone 1/4” 3/8” 1/2” O.D. Tubing Bender 3 in 1 Tube Bender 180° HVAC Copper Aluminum Tubes Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for soft copper / aluminum tubes.
  • applicable tube outer diameter: 1/4"、3/8"、1/2".
  • applicable wall thickness: 0.027”-0.059”(0.7mm-1.5mm).
  • bending radius: 0.82”, 1.14”, 1.43”(21mm, 29mm, 36.5mm).
  • [3-in-1 Design] - The tube bender is a 3 in 1 tool and will fit 1/4", 3/8", 1/2" outside diameter tubes..
  • [High Quality] - High-quality alloy aluminum body, which is lightweight and durable. (NOTE: if the tube wall thickness < 0.059”, it may be damaged.).
  • [Professional Design] - (1)Aluminum alloy material makes it light and portable.(2)The soft rubber handle provides a comfortable grip..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

Williams Hydraulics 5HD2S100 2 Speed Double Acting Hand Pump 128

  • Improve work efficiency: If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
  • Accurate pressure gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Large capacity tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside..
  • Working mode: Manual valve controls the return oil.
  • Application: The pump can be used for a variety of hydraulic equipment. Punching machine, bending machine, Jack split hydraulic products..
Check Stock

VEVOR Pipe Bender, 7 Dies 1/4-7/8 Inch Refrigeration Ratcheting Tube Bender Kit, 90° Tubing Bender with Reverse Bending Attachment for HVAC

  • Universal Usage: The multifunctional tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • 1/4"-7/8" Bending Range: We provide 7 Elbow diameter range for pipes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6, 8,10,12,16, 19, 22mm). Tubing cutter with reamer and extra blade capacity:1/8 to 1-1/8-inch (3-28mm). The bending heads can meet different usage needs, making your work more convenient..
  • Kit Included: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Inner Outer Reamer x 1, Carrying Box x 1, Manual x 1. Quality machined aluminum alloy is for strength and durability..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 6-22 mm tubes in both forward and reverse to 90 degrees. It allows tight 90 degree angles to be made easily out of a wall or ot....
Check Stock

Electric Hydraulic Pump Power Pack Unit 2 Stage Single Acting Electric Driven Hydraulic Pump Pedal Solenoid Valve Control equipments 2-70 Mpa

  • Electric hydraulic pump input voltage: 110V.Motor power: 0.75KW.Function: Single-acting, manual valve.
  • The pump can be used for a variety of hydraulic equipments..
  • Working mode: Pedal Solenoid valve Control.
  • Punching machine, bending machine, Jack split hydraulic products.
  • If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

750W Electric Driven Hydraulic Pump Single Acting Manual Valve 10000PSI Manual Valve Power-Units 7L 1400r/Min

  • [Feature]If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
  • [Working mode] Manual valve controls the return oil.The motor must have reliable grounding..
  • [Note]The oil pump regular working temperature between 10℃~50℃,when find the oil temperature≥70 ℃ should stop using after continuous working under high pressure, let it self-cooling before use..
  • [Use Occasion] The pump can be used for a variety of hydraulic equipments.Punching machine, bending machine, Jack split hydraulic products..
  • [Satisfaction Service]We ship directly from the US warehouse.If there is any questions please feel free to contact with us, we will response in 24 hours and we will provide the best suitable solutions for you..
Check Stock

Mophorn 12V Dump Trailer 13 Quart Single Acting Steel Reservoir, 3200PSI Power Unit with Control Remote 12 Volt Hydraulic Pump, Black

  • 【HIGH QUALITY MATERIAL FOR LONGEVITY】- This hydraulic power unit full high quality construction with high strength and hardness. Good wear resistance, durable in use..
  • 【FAST START】- The high-quality hydraulic pump ensures a fast start every time and a long using period, Reduce labor intensity, improve hydraulic trailer pump work efficiency..
  • 【RELIABLE QUALITY】- The electric hydraulic pump is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions..
  • 【EASY TO OPERATE】- This dump trailer hydraulic pump equipped with other hydraulic tools can carry out lifting, pressure type, elbow, bending row, straightening, cutting, assembly, demolition and many other work..
  • 【WIDE APPLICATION】- Hydraulic power used in applications where extending a hydraulic cylinder is needed, truck tailgate lift, scissor lift, dump trailer, lift truck, snow plow, aerial platform, road signs, material handling.
Check Stock

Amarine Made Boat Marine 5 Spoke 13-1/2 Inch Destroyer Steering Wheel with Black Foam Grip and Knob

  • 13.5'' Steering Wheel: Made of aluminum alloy and high-quality plastic. This boat hydraulic steering kit is anti-aging, corrosion-resistant, and high-density. The anti-slip wave design can make your operation more comfortable..
  • Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
  • Aluminum Alloy Casing: Our hydraulic steering kit for boats features high-strength aluminum alloy casing ensuring wear resistance and corrosion resistance, and effectively prevent seawater erosion..
  • Compact & Neat: The hydraulic pump has a compact internal structure and a stylish exterior. The hydraulic pump of our boat steering system for boats rated to a maximum of 300 HP..
  • Wide Application: These boat steering parts are suitable for ships under 300HP horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more..
Check Stock

Tube Bender Kit Refrigeration Ratcheting Tubing benders Hand Tool 1/4 to 7/8 Inch Aluminium Alloy Replacement Head

  • Elbow tubing diameter range: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6,8,10,12,16,19,22mm) O.D..
  • Easy to use: With a deburring tool for cleaning tubing, quick change bending mandrels and heads..
  • Complete ratchet hand bend kit: Aluminium alloy bender heads, uneasy to damage, solid and durable, prevent pipe deformation. Professional tool for commercial or occasional use..
  • Applications: sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • Package Include: 1x Tube Bender, 1x Pipe Cutter, 1x Deburring Tool With Extra Blade, 2x Fixed Supports, 7x Tube Bender Heads, 1x Carrying Box..
Check Stock

Universal Motorcycle ATV Hydraulic Brake Hose Line Aluminum CNC Pipe Tee Connector Coupling Tee Fitting 3 way Adapter (Black)

  • Information: Size is 44*39*17mm, Connector Bolts Hole is M10*1.25， Material: aluminum alloy， 100% CNC.
  • Applicable models for General M10 Brake Hose，mainly used for branching 2 brake discs with brake hose 10mm Banjo Hole (suitable for most hydraulic brake systems!).
  • ADVABTAGE: The beautiful shiny finish with anodized treatment lever improves corrosion resistance and hardness, and prevents bending and damage at the time of crash..
  • EASY INSTALLATION: Perfect and easy to fit, no need modification. 100% test before shipping to ensure product perfect, stability and durability..
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • ...r machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock