Reviews Alloy Carbide Rods

Warthog Extreme Edge Stones - Coarse

  • REPLACEMENT HONES - for the V-Sharp Xtreme EDGE Diamond Sharpener. Includes 2 rods..
  • 3 DIAMOND/STEEL RODS AVAILABLE - Fine, Medium, and Coarse with a honing steel back..
  • ALL DIAMOND RODS AVAILABLE - Medium (600 grit) on one side and Fine (1,000 grit) on the other..
  • DIAMOND SHARPENER - Harder than stone and tungsten-carbide to give your knives a smooth edge..
  • MADE IN SOUTH AFRICA - Skillfully made and assembled at our factory in George, South Africa.
Check Stock

FERROFIRE 3/8 X 4 drilled Ferro rods Flint Steel ferrocerium rods with a Lanyard Hole Pack of 5

  • FERROFIRE branded drilled ferro rods are second to none with its stable quality, higher ignition rate, less smoke, and a lanyard hole..
  • Too hard rods are hard to make sparks, while too soft rods have poor capability of strikes, FERROFIRE 3/8" thick ferro rods have a capability up to....
  • A premium flint rod don't need to long length, 4" ferrocerium rod of FERROFIRE is quite enough. Prepare some fat wood as ignition material in advance,....
  • A blade or a carbide steel striker made by FERROFIRE can easily make sparks shower, light a camping fire, any weather condition can't stop your....
  • FERROFIRE ferro rods are quite easy to make hot sparks even if a normal size of 4 inch, take a longer rods than 5" in your back pack will be....
Check Stock

FERROFIRE 1/2 X 4 Drilled Ferro Rods Flint Steel Ferrocerium Rod with Lanyard Hole for Paracord Pack of 2

  • Too hard rods are hard to make sparks, while too soft rods have poor capability of strikes, FERROFIRE 1/2" thick drilled ferro rods have a capability....
  • FERROFIRE branded drilled ferro rods are second to none with its stable quality, higher ignition rate, less smoke, and a lanyard hole..
  • A premium flint rod don't need to long length, 4" ferrocerium rod of FERROFIRE is quite enough. Prepare some fat wood as ignition material in advance,....
  • A blade or a carbide steel striker made by FERROFIRE can easily make sparks shower, light a camping fire, any weather condition can't stop your....
  • FERROFIRE ferro rods are quite easy to make hot sparks even if a popular length of 4 inch, take a longer rods than 5" in your back pack will be....
Check Stock

KNIFE SHARPENER BELT KIT

  • Sharpening band set with a grain size of 3600.
  • For the Work Sharp Knife & Tool Sharpener.
  • The knife sharpener from Work Sharp is suitable for use on the workbench or worktop as well as in the garden or in the warehouse.
  • The basic sharpness is created via two crossed carbide elements, while the fine extraction is done with the two ceramic rods.
  • Thanks to the integrated suspension, the carbide elements follow the shape of the blade, making the result much more even.
Check Stock

Accusize Industrial Tools 2-24'' by 0.001'' Resolution Inside Micrometer Set, 3011-5051

  • The combining of extension rods provides a wide measuring range. Supplied with a standard caliper gauge for zero setting..
  • Carbide measuring faces. Diameter of extension rods: φ15.5mm. Rod Diameter: 0.61".
  • Accuracy: Metric(3+n+L/50)μm, (n=number of rod, L=maximum. Measuring length (mm) [Inch]. Resolution: 0.0001".
  • Each interchangeable rod is marked with its measuring range. Use to measure 3 flute cutting heads such as end mills, taps and reamers..
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

Carbide Lathe Turning Tools, 20\ Full Size woodturning Tools, including Swan Neck Hollower, Rougher, Finisher, detachable alloy handle (Alloy Tool Set)

  • Include 11" handle, 9" tool bar and pre-installed carbide cutter, wrench*2, aluminum alloy case with sponge liner..
  • The length of the tool bar can be adjusted freely. For safety, please make sure the tool bar is fixed tighlty by both screws. So the total length of the tool should be within 19"..
  • Top grade product. Tungsten carbide tip, stainless steel bar and aluminium alloy handle & case. Everything in this tool set is vibrant and reliable..
  • One nice thing about carbide cutter is that you can just replace the cutters and continue with your project. No need to sharpen the cutter..
  • Versatile and Convenient. Offers 2 alloy handle so it's easy to just grab and use without changing bits, the red and blue coating is easthetically pleasing while practically addiing friction..
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

Glass Cutter Kit 2mm-20mm, Alloy Handle Mirror Cutter Tool Alloy Scribe Pen for Thick Glass Mosaic and Tiles - Pencil Shape & Design (Glass Cutter) (Regular).

  • Professional Glass Cutter Tool: Specifications: Product Name: Glass Cutter.
  • Material: Carbide cutter wheel, Alloy handle, Cutting Range: 2-20mm..
  • Glass Cutter Package Includes: 2 × Alloy Handle, 1 × 2-6mm Cutting Head, 2× 6-12mm Cutting Head, 1 × 12-20mm Cutting Head, 1 × Oil Dropper, x1 Alloy scribe pen..
  • Easy to use: Anti-skid durable alloy handle reduces wrist fatigue. When pressure is applied, an automatic oil dispensing system keeps the wheel lubricated every time you cut, making the cutting head more fluent and sharp..
  • Premium Carbide glass cutter, The glass cutter adopts an ultra-strong diamond carbide blade with solid hardness and sharp cutting to guarantee smooth operations, 3 Pieces of cutting heads with different sizes in package, 2-6mm, 6-12mm, and 12-20mm, cutting different glass thicknesses..
  • Wide application: It’s perfect for cutting stained glass and other craft and household uses. A must-have cutter tool for DIY projects. It suits mirrors, windows, glass shelves, stained glass cutting, etc..
Check Stock

40Pcs End Mill Bits Set 1/8\ Shank, Mcwdoit CNC Router Bits Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits

  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance..
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs..
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
  • 【Parameter】Overall Length（OAL）: 38mm.
Check Stock