Reviews Alloy Bbr Frame

BBR Tuning Heavy Duty Springer Bicycle Fork – Motorized Gas Bike Suspension Fork (Black)

  • SMOOTH RIDE: The BBR Tuning Heavy Duty Springer Bicycle Suspension Fork Features a large front facing spring ready to absorb those hard bumps in the road and keep your ride smooth. These forks are constructed of heavy duty steel so there durable and built to last!.
  • STYLISH DESGN: The Heavy Duty Springer Fork is a great addition to any bicycle needing front suspension. Springer forks provide great suspension as well as a sleek and vintage look for beach cruisers, chopper bicycles, and many other style bikes..
  • EASY INSTALLATION: Installation is so easy: Just slip the bearings and cups in to your frame, slide the fork in to the frame, fasten down the headset, and you’re ready for action..
  • UNIVERSAL FIT: Designed to fit most 26 inch cruiser style bikes that use a 1' threaded headset.
  • PACKAGE INCLUDES: 1x BBR Tuning Heavy Duty Springer Bicycle Fork.
Check Stock

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • RACE READY PERFORMANCE: With the BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly with OKO 21mm Carburetor w/ Velocity Stack you’ll get the power and speed your build’s been looking for. A ported cylinder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cyl....
Check Stock

BBR Tuning 66/80cc Black Motorized Bicycle Kit – 2 Stroke Gas Powered Bike Motor Engine

  • RELIABLE: All of the BBR Tuning bike engines feature the latest upgrades, including Japanese crank bearings and clutch components. We make certain that all of our manufactures abide by strict quality control assurance measures and use the highest quality material so that we can make certain that all of our customers get only the best. Made for experienced riders and builders, our BBR Tuning 66cc engine kit is ready soar- are you?.
  • HIGH PERFORMANCE: Unlike most standard bicycle engine kits, the BBR Tuning 66/80cc comes standard with high quality components designed to last. This engine puts out 5-6 HP (horse power) and has a top speed of 25-35MPH (miles per hour) stock..
  • COMPLETE DIGITAL INSTALLATION GUIDE: Each BBR Tuning bicycle engine kit comes with an easy-to-follow installation guide that takes you step by step through installing, adjusting, and fueling your brand new engine kit for the ride of your life. NOTE: Engines come 90% assembled and require the installation of the cylinder head and piston..
  • FUEL EFFECIENT: The BBR Tuning Black Angle Fire 2-Stroke Engine Kit is extremely affordable and fuel efficient. Providing 100 – 150 miles per gallon..
  • INDUSTRY LEADING 6 MONTH WARRANTY: Backed by an industry leading 6 month manufacture warranty and life....
Check Stock

BBR Tuning 10T Billet Precision Bearing Idler Sprocket

  • BETTER CHAIN ALIGNMENT: No more chains coming out of alignment or coming out from your idler wheel. This 10 Tooth sprocket locks your chain on your idler with minimal resistance because of the precision high grade bearings..
  • LONG LASTING: The BBR Tuning 10 Tooth Billet Aluminum Pulley Idler is designed to out last those standard plastic pulley wheels and.
  • EASY INSTALLATION: Installation is a breeze: uninstall your idler roller from your chain idler pulley, replace with this idler sprocket, install your chain, and you're ready to roll.
  • UNIVERSAL FIT: Compatible with 415 heavy duty bicycle engine chains, regular and spring chain tensioner..
  • PACKAGE INCLUDES: 1x BBR Tuning 10 Tooth Billet Aluminum Sprocket with Bearing, 1x Mounting Nut and Bolt with Spacer and washer.
Check Stock

BBR XR50 Handlebar Kit (Black) Compatible With 04-19 HONDA CRF50F

  • The BBR XR50 Handlebar Kit raises the handlebars for adult backyard racing.Stock controls will NOT fit on the standard 7/8" bars supplied with this kit, so this kit comes with all necessary parts including controls.Anodized, CNC-machined billet aluminum t.
  • Honda XR / CRF50 handlebars from 3/4" diameter to standard motorcycle / bicycle 7/8"..
  • This throttle, cable, and carburetor top are a special design to work with the super short slide of the O.E.M..
  • If you have a larger aftermarket carb, you will need a different throttle and cable (consider BBR's carb kit throttle and cable.
Check Stock

WAC Landscape Lighting, LED 12V Horizontal Indoor or Outdoor Step and Wall Light 2700K Warm Built-in LED in Black

  • 12V step and wall lights by WAC Landscape Lighting are offered in a variety of styles and can be installed on existing 12V landscape lighting systems..
  • Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements..
  • Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments..
  • Magnetic or Electronic 12V power supply is required. Recommended power supply WAC Landscape Lighting Stainless Steel outdoor transformer: (75W) 9075-TRN-SS, (150W) 9150-TRN-SS, (300W) 9300-TRN-SS, (600W) 9600-TRN-SS..
  • High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000. Smooth and continuous dimming to 10% with a Magnetic Low Voltage Dimmer..
  • Standards: UL & cUL 1838 and IP66 Rated for Wet Locations (See Specification Sheet for complete details)..
Check Stock

WAC Landscape Lighting, LED 12V Horizontal Indoor or Outdoor Step and Wall Light 3000K Warm Built-in LED in Black

  • 12V step and wall lights by WAC Landscape Lighting are offered in a variety of styles and can be installed on existing 12V landscape lighting systems..
  • Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements..
  • Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments..
  • Magnetic or Electronic 12V power supply is required. Recommended power supply WAC Landscape Lighting Stainless Steel outdoor transformer: (75W) 9075-TRN-SS, (150W) 9150-TRN-SS, (300W) 9300-TRN-SS, (600W) 9600-TRN-SS..
  • High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000. Smooth and continuous dimming to 10% with a Magnetic Low Voltage Dimmer..
  • Standards: UL & cUL 1838 and IP66 Rated for Wet Locations (See Specification Sheet for complete details)..
Check Stock

WAC Landscape Lighting, LED 12V Horizontal Indoor or Outdoor Step and Wall Light Amber 1800K Built-in LED in Black

  • 12V step and wall lights by WAC Landscape Lighting are offered in a variety of styles and can be installed on existing 12V landscape lighting systems..
  • Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements..
  • Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments..
  • Magnetic or Electronic 12V power supply is required. Recommended power supply WAC Landscape Lighting Stainless Steel outdoor transformer: (75W) 9075-TRN-SS, (150W) 9150-TRN-SS, (300W) 9300-TRN-SS, (600W) 9600-TRN-SS..
  • High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000. Smooth and continuous dimming to 10% with a Magnetic Low Voltage Dimmer..
  • Standards: UL & cUL 1838 and IP66 Rated for Wet Locations (See Specification Sheet for complete details)..
Check Stock

WAC Landscape Lighting, LED 12V Horizontal Indoor or Outdoor Step and Wall Light 2700K Warm Built-in LED in White

  • 12V step and wall lights by WAC Landscape Lighting are offered in a variety of styles and can be installed on existing 12V landscape lighting systems..
  • Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements..
  • Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments..
  • Magnetic or Electronic 12V power supply is required. Recommended power supply WAC Landscape Lighting Stainless Steel outdoor transformer: (75W) 9075-TRN-SS, (150W) 9150-TRN-SS, (300W) 9300-TRN-SS, (600W) 9600-TRN-SS..
  • High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000. Smooth and continuous dimming to 10% with a Magnetic Low Voltage Dimmer..
  • Standards: UL & cUL 1838 and IP66 Rated for Wet Locations (See Specification Sheet for complete details)..
Check Stock

WAC Landscape Lighting, LED 12V Vertical Indoor or Outdoor Step and Wall Light 2700K Warm Built-in LED in Bronze

  • 12V step and wall lights by WAC Landscape Lighting are offered in a variety of styles and can be installed on existing 12V landscape lighting systems..
  • Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements..
  • Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments..
  • Magnetic or Electronic 12V power supply is required. Recommended power supply WAC Landscape Lighting Stainless Steel outdoor transformer: (75W) 9075-TRN-SS, (150W) 9150-TRN-SS, (300W) 9300-TRN-SS, (600W) 9600-TRN-SS..
  • High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000. Smooth and continuous dimming to 10% with a Magnetic Low Voltage Dimmer..
  • Standards: UL & cUL 1838 and IP66 Rated for Wet Locations (See Specification Sheet for complete details)..
Check Stock