Reviews Airsoft M14

Evike Airsoft – CYMA Sport Airsoft M14 DMR AEG Rifle (Color: Tan)

  • Exact 1:1 Scale of M14 SOCOM style airsoft gun with RIS Rail System.
  • Included with a magazine that holds approximately 200 rounds, Tactical Red Dot Scope with illuminated crosshair.
  • Shoots at approximately 260 FPS with 0.12g BBs and 200 FPS with 0.20g BBs.
  • Single shot spring gun. Requires you to cock each time to shoot..
  • Fast, clean, and inexpensive to maintain. Requires no gas or battery to operate..
Check Stock

DoxiGlobal Mini Tracer Unit Colorful Simulated Spitfire Lighter V BBS Glow in Dark Automatic Gun Pistol Light Tactical Airsoft for 14mm CCW/ M14 CCW Thread(Octopus)

  • Material:Aluminium alloy shell with built-in USB charger,more durable and water-proof.It is the best friend to upgrade your tracer and make airsoft bbs glowing in dark..
  • Upgrade Colorful Spitfire Tracer Unit :Press to switch between 11 different colors： Colorful,Red,Blue,Green,Purple,Yelllow,Pink,Orange,Red+Blue,Red+Green,Blue+Green..
  • This airsoft gun tracer supports green luminous bbs or water beads. Suitable for 14mm CCW (M14 CCW Thread).
  • Smart Energy Saving: Automatically Switch ON / OFF : It would turn off automatically after leaving it idle for 40 minutes.Led power indicator / battery power indicator.Built in lithium battery for USB charging cable .it can be use up to 4 hours.Fully charged battery would Last over to 2000 rounds..
  • Not Working? Pls Week Up Battery:Please plug in the charging cable to charge,then press the switch button and hold it until the switch button indicator light flashes green, you can unplug the charging cable and release the switch button. You can reinsert the charging cable to charge, Then the battery can enter the normal working state for work and use.(If the indicator light dose not flash,Please repeat the above steps several times to wake up the battery.).
Check Stock

ComeFloor Angle Grinder Attachments Drill Adapter 5/8 inch 11 Female to M14 Male 12,000 RPM Rated Wire Wheel Adaptor Compatible with Dewalt, Makita, Milwaukee Ryobi Tools

  • Heavy-duty, solid steel, commercial grade adapter for using a European attachment (Metric 14) on North American 5/8"-11 angle grinder, grinder saw, concrete angle grinder. 12,000 RPM rated. Female side is 5/8"-11 and male side is M14 threaded. Mortar rake adapter.
  • M14 side is 0.75 inch long. You can use M14 Threaded Mortar Rake, Diamond Tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw, hole saw drill attachment with your standard American 5/8" 11 threaded power tools.
  • If you have a 5/8"-11 standard North American power tool, this american to european adapter will help you use M14 (metric 14) a female threaded wheel polisher drill attachment, diamond core drill bit, hole drill attachment, angle grinding wheel, angle grinder polisher..
  • Standard small hand polisher can utilize this angle grinder arbor adapter or M14 drill adapter for a polishing spindle, metric hole saw, mortar rake..
  • This adapter is designed for European M14 tool attachments to be used with North American power tools with 5/8 inch-11 threaded spindles. 5/8 inch-11 thread is the standard for North American Tools Metric 14 (M14) is very common for European Tools.
Check Stock

DoxiGlobal Mini Simulated Spitfire Tracer Unit Lighter S Tactical Airsoft Automatic Gun Pistol Light BBS Glow in Dark for 14mm CCW / 10mm CW Thread M14 CCW Thread to M11 CW Thread Paintball

  • NEW Style Pattern:Aluminium alloy shell with built-in USB charger,more durable and water-proof.It is the best friend to upgrade your tracer and make airsoft bbs glow in dark..
  • ncrease Simulated Spitfire Mode:Switch between flash and spitfire mode. Supports sustain trace function up to 35 PRS (2100 RPM) Running fire..
  • This airsoft gun tracer supports green luminous bbs or water bombs. Suitable for 10mm CCW pistols and 14mm CW automatic rifles(M14 CCW Thread to M11 CW Thread).
  • Smart Energy Saving: Automatically Switch ON / OFF : It would turn off automatically after leaving it idle for 40 minutes.Led power indicator / battery power indicator.Built in lithium battery for USB charging cable .it can be use up to 4 hours.Fully charged battery would Last over to 2000 rounds..
  • Not Working? Pls Week Up Battery:Please plug in the charging cable to charge,then press the switch button and hold it until the switch button indicator light flashes green, you can unplug the charging cable and release the switch button. You can reinsert the charging cable to charge, Then the battery can enter the normal working state for work and use.(If the indicator light dose not flash,Please repeat the above steps several times to wake up the battery.).
Check Stock

WoSporT Mini Simulated Spitfire Tracer Unit Lighter S Tactical Airsoft Automatic Gun Pistol Light BBS Glow in Dark for 14mm CCW / 10mm CW Thread M14 CCW Thread to M11 CW Thread Airsoft Guns Pistol

  • High quality material:Aluminium alloy shell with built-in USB charger，more durable and water-proof.It is the best friend to upgrade your tracer and make airsoft bbs glow in dark..
  • Increase Simulated Spitfire Mode:Switch between flash and spitfire mode. Supports sustain trace function up to 35 PRS (2100 RPM) Running fire..
  • This airsoft gun tracer supports green luminous bbs or water bombs. Suitable for 10mm CCW pistols and 14mm CW automatic rifles(M14 CCW Thread to M11 CW Thread).
  • Smart Energy Saving: Automatically Switch ON / OFF : It would turn off automatically after leaving it idle for 40 minutes.Led power indicator / battery power indicator.Built in lithium battery for USB charging cable .it can be use up to 4 hours.Fully charged battery would Last over to 2000 rounds..
  • Not Working? Pls Week Up Battery:Please plug in the charging cable to charge,then press the switch button and hold it until the switch button indicator light flashes green, you can unplug the charging cable and release the switch button. You can reinsert the charging cable to charge, Then the battery can enter the normal working state for work and use.(If the indicator light dose not flash,Please repeat the above steps several times to wake up the battery.).
Check Stock

DT-DIATOOL Diamond Core Drill Bits Kit for Porcelain Tile Ceramic Marble Granite Concrete Hole Saw (19/28/35/45/51mm) + Finger Bits (20mm) + 2 Adapters

  • 【Specification】Totally 8pcs/box: 5pcs(19/28/35/45/51mm) drill bits + 1pc 20mm finger bit + 1pc hex shank adapter + 1pc M14 to 5/8"-11 adapter..
  • Drill bits: Diameter 19mm-51mm, 5/8-11 thread, total length 75mm(3 Inch).
  • Finger bit: Diameter 20mm, 5/8-11 thread, total length: 65mm. Workable length 50MM, Grit #50/60..
  • Hex adapter: 5/8"-11 male thread, 3/8" hexagon shank.
  • M14 adapter: 5/8-11 male thread to M14 female thread.
  • 【Application】Drills Bits for dry or wet drilling holes.
  • Finger Bits for grinding,enlarging or shaping holes on porcelain ceramic tiles, granite, masonry,marble,concrete,etc. Adapters change 5/8 Inch-11 thread to 3/8-Inch hexagon shank or M14 thread and allow your bits to fit a wider range of machines..
Check Stock

Angle Grinder Attachment M14 Adapter 5/8 inch 11 Female to M14 Male 12,000 RPM Rated Wire Wheel Drill Adaptor Compatible with Dewalt, Makita, Milwaukee, Hitachi, Ryobi Tools

  • Heavy-duty, solid steel, commercial grade adapter for using a European attachment (Metric 14) on North American 5/8"-11 angle grinder, grinder saw, concrete angle grinder. 12,000 RPM rated. Female side is 5/8"-11 and male side is M14 threaded. Mortar rake adapter.
  • M14 side is 0.75 inch long. You can use M14 Threaded Mortar Rake, Diamond Tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw, hole saw drill attachment with your standard American 5/8" 11 threaded power tools..
  • This wheeler angle grinder drill chuck adapter has a water hole in the center for cooling diamond tools, diamond hole saw, diamond core drill bits..
  • If you have a 5/8"-11 standard North American power tool, this american to european adapter will help you use M14 (metric 14) a female threaded wheel polisher drill attachment, diamond core drill bit, hole drill attachment, angle grinding wheel, angle grinder polisher..
  • Standard small hand polisher can utilize this angle grinder arbor adapter or M14 drill adapter for a polishing spindle, metric hole saw, mortar rake..
Check Stock

BRST 150W AC Adapter for Dell Slim Alienware M14x M14 P18G P18G001 M14x R2 M14xR2 Gaming Laptop Power Supply Cord Cable Battery Charger Mains PSU

  • 【Specifications】: Laptop Charger / Adapter / Cable worldwide input voltage range: 100-240V 50/60HZ.
  • 【Compatible With】:Our product is the replacement.not orginal,but All Laptop Chargers&Cables have been 100% tested ensure it works with the models shown in th title..
  • 【Certified】: All our products are CE FCC RoHS approved with over-voltage,over-current,over-load,short-circuit protection.Each product undergoes a 48-hour aging test..
  • 【Best Service】: We offer a no-questions-asked full money back guarantee. Additionally, for 3 year from the date of purchase, we will exchange your product free of charge should it become defective. 24-hour customer service..
  • BRST 150W AC Adapter for Dell Slim Alienware M14x M14 P18G P18G001 M14x R2 M14xR2 Gaming Laptop Power Supply Cord Cable Battery Charger Mains PSU.
Check Stock

M1A / M14 Bipod Adapter

  • This adapter will work on any M14 or M1A rifle with wood or polymer stock.
  • With this adapter you can install a "Sling Swivel Stud" on your stock so you can attach any Harris Bipod to it. works with the M1A or M14 rifles with both Wood or Polymer stocks.
Check Stock

EilxMag 110PCS Hardened Alloy Steel Metric Tap and Die Rethreading Tool Set - Cutting External & Internal Threads with Storage Case (Pakage)

  • 【Tap and die set size】: M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5.
  • 【Easy to USE】: Constructed from hardened alloy steel for maximum strength, durability and longevity. Heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization. Tapered teeth design to start threading easily and smoothly and prevent overthreading..
  • 【Wide applications & Quality guarantee】: suitable for the repair of new threads or damaged threads on most metals such as carbon steel, cast iron, aluminum, brass, copper and stainless steel. We promise one year warranty, if you encounter problems can contact us at any time..
Check Stock