Reviews Air Ventilation Nozzle

Hon&Guan 4'' Dryer Vent Covers for House, Dryer Vent Cover Outdoor Exterior Wall Vent Cover Opening Flap Vent with Built-in Guard Screen.

  • ...LL]: Insert the nozzle into the square exhaust fan outlet. The 4″ gable vent is then fastened to the wall to create a tight seal using the 4 stainless steel screws. Easy to install, easy to remove and clean, saving you valuable time and effort..
  • [WIDELY USE]: Hon&Guan 4” exterior wall vent cover are suitable for ventilation ducts, bathroom vents and fume extraction equipment, air conditioners, kitchen fans and vents, all home wall vents, heat transfer, ventilation systems and industrial use, keeping you away from unwanted odors and outdoor elements. In cold weather, the easy moving lamellas on the dryer vent cap helps keep cold air from passing through the vents..
  • [HIGH QUALITY]: Includes 1 pc 4 inch outdoor dryer vent cover and 4 pcs screws. Our exterior dryer vent cover made in high-impact poly plastic construction, contain UV stabilizer to reduce fading due to exposure to sunlight..
  • [GREAT VENTILATION]: Hon&Guan outside dryer vent covers for house helps keep wind, rain and snow from entering outdoor dryer vents, also protect your house from damage..
  • [BUY WITH CONFIDENCE] We promise to ensure your absolute satisfaction with every purchase. Risk-free shopping. If you are not satisfied, you can replace it for free or give it a full refund..
Check Stock

AVID POWER 1800W Heat Gun with 2-Temp Settings, Five Nozzle Attachments for Crafts, Tube Bending, Stripping Paint

  • Powerful Versatile Heat GunThis well-made heat gun is ideal for shrinking tube/wrap, woodburning projects, adhesive removal, electronics, plastic wrap, paint removal or floor clean, heating PVC, removing rusted bolts, crafts and more heating or thawing purpose..
  • Dual Temperature SettingsThis craft heat gun have 2-temp control and strong power to quickly heat up to 1205. Temperature settings [I:716 , II:1205], two air flow speeds: I-300L/min, II-500L/min are suitable for crafts and heavy duty projects..
  • Reliable Overload ProtectionProfessional built-in overheating protection also prevents heat gun from being damaged when machine is overload. Please Note: Get the soldering heat gun a rest when continuous using for 30 minutes..
  • Ergonomic DesignRubber-covered non-slip handle for comfortable grip. With the ventilation slot, heat dissipation system can cool down motor during operation. Five different nozzle attachments provide convenience for plenty of projects..
  • Package IncludesHeat Gun with 5.9Ft/1.8m cord, four attachments (1pc reflector nozzle, 1pc deflector nozzle, 1pcs reduction nozzles and 1pcs BBQ lighter), user manual. 24H After-Sale Service: We are always here to solve your problems with our products, please feel free to contacting us..
Check Stock

WINSINN 40mm Fan 5V, 3D Printer Micro 5 Volt Fans 4010 Hydraulic Bearing, Brushless Cooling 40mmx10mm 2PIN (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 5V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 5V, Current: 0.15A, Power: 0.75W, Speed: 5100PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

PowerNet XL Volleyball Wheeled Cart | Portable Hammock Ball Cart | Collapsible Rolling Training Equipment Basket | Lightweight Bin | Great for Indoor and Outdoor Use | Multisport

  • What you will receive: 1 piece of air pump valve adaptor, 1 piece of Metal air pump converter, 4 piece of air valve nozzles converter. Lightweigh and easy to carry, the air valve adapter set can meets all your needs..
  • Broad applicability: our air valve adapter set includes 4 different air nozzle converters. Round head nozzle fits inflatable beds, pools and boats. Sharp head nozzle fits swim rings and pool floats. Square head nozzle fits SUPs and dinghies. Spiral head nozzle fits kayaks and canoes..
  • High quality material: the air pump valve adaptor and air valve nozzles converter are made of high strength hard plastic and alloy, nozzle air pump converter made of copper. These two materials are quite sturdy and durable,can be used for a long time..
  • Easy to use: Choose the right nozzle for the adapter. Connect the air compressor hose to our adapter. Insert the adapter into the inflation port of SUP. Turn on the air compressor and start filling..
  • Works great: It works great, could hold down the pin, and prevents back flow of air so you can get the right pressure. It will be a Indispensable accessories of your inflatable pontoon boat..
Check Stock

G830 2.0 Gelcoat Spray Gun

  • 【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
  • 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
  • 2 x 1000ml Plastic Cup (with metal cup cover).
  • 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
  • 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
  • Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
  • Hold thehandle and hold the gun. The air is ejected from the air jet..
  • 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other materials such as parting films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced gelcoats, adhesives and paints..
Check Stock

AVID POWER 1500W Heat Gun with Variable Speed, Hot Air Gun 122-1022, 3-Temp Settings, Five Nozzle Attachments for Crafts, Tube Bending, Stripping Paint

  • Variable Temp Control & 3-Temp SettingsUnlike other dual temperature heat guns, Avid Power heat guns provide variable temperature control and strong power to quickly heat up to 1022. Three temp settings [I:122250L/min, II:752 250L/min, III:1022500L/min] are suitable for various heating applications..
  • Cooling Mode & Overheating ProtectionThe cooling mode 122(50) design makes it easier to cool down the material from high temperature. Professional built-in overheating protection also prevents heat gun from being damaged..
  • Five Nozzle AttachmentsThis hot air gun includes four different nozzles and a triangular scraper. Perfect for crafts, paint and adhesive removal, heat shrinking tubing, shaping PVC tubes, thawing frozen pipes, removing rusted bolts and more..
  • Ergonomic DesignWith the ventilation slot, heat dissipation system can cool down motor during operation.
  • Rubber-covered handle for comfortable grip. Front protection tube could be disassembled for working in narrow places..
  • Package IncludeHeat Gun with 6.2Ft/1.9m cord, five attachments (1pc reflector nozzle, 1pc deflector nozzle, 2pcs reduction nozzles and triangular scraper), user manual. If you receive a defective item, please contact us for further assistance..
Check Stock

Forney 85337 MIG Welder Nozzle, Tweco Style, 5/8-Inch Bore

  • Easy to replace, high-quality stainless steel, durable material..
  • No air leak, highly univeral for various heat guns and heat resistant..
  • Effective way to avoid the hot air gap between the outlet steel pipe to drain from the air nozzle with hot air gun..
  • Practical and neccessary replacement for your plastic hot air welder gun. Besides, we have high quality heat guns in our shop!.
  • Package included: 1x Triangle Welding Nozzle, 1x Round Welding Nozzle, 1x Welding fixed nozzle.(Welding fixed nozzle: Used for fixing before welding.).
Check Stock

Valwix 20PSI High Pressure SUP Air Pump The Whale - Dual Stage Inflation/Deflation Electric Pump Auto Cooling for Inflatable Stand Up Paddle Boards

  • ACTIVE COOLING TECHNOLOGY - Inflates 3 BOARDS UP TO 20 PSI IN A ROW for families and group outing. AUTOMATICALLY COOLS DOWN from the first second of....
  • DUAL STAGE,AUTO OFF INFLATION - 1st stage for MAXIMUM SPEED at 350L/min and 2nd stage for MAXIMUM PRESSURE at 70L/min, approximately 8-10 mins for....
  • 12V CAR CONNECTION & REAL TIME PRESSURE - Connected to CAR CIGARETTE LIGHTER or power station with 12V OUTLET. Real time digital display, target....
  • SAND-PROOF MESH INLET, ENHANCED VENTILATION - Metal mesh blocks sand, grass and dirt out of the air intake to ensure maximum airflow. Improves cooling....
  • 7 VALVE SET FOR BOTH HIGH/LOW PRESSURE INFLATABLES - Comes with H3 (Hokey-Roberts/ HR) nozzle for most branded paddle boards, Boston nozzle for....
Check Stock

JINSLU 2PCS Flux Core Gasless Nozzle, Compatible with Lincoln | Forney | Chicago Welder Part | Clarke MIG Welder, and More, Tweco Mini/#1 (KP1939-1).

  • Replacement nozzle for vinyl hot air gun..
  • Easy to replace, high-quality stainless steel, sturdy and durable..
  • Resistant to high temperature, no air leakage, convenient to replace, versatility..
  • Effective way to avoid the hot air gap between the outlet steel pipe to drain from the air nozzle with hot air gun..
  • Package included: 1x Triangle Welding Nozzle, 1x Round Welding Nozzle, 1x Welding fixed tacking nozzle. (Welding fixed nozzle: Used for fixing before welding.).
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock