Reviews Air To Air Intercooler 3

FORTLUFT Universal Turbo Aluminum Intercooler Piping & Joiner Coupling (Straight Pipe, 3.00''/76mm)

  • Outside Diameter 3.00''/76mm - Wall Thickness 0.07''/1.8mm – Overall Length 23.60''/600mm.
  • Universal, Polished Aluminum, Bead rolled edges.
  • Used in automotive, industrial and marine, such as air intake, cooling systems, turbo intercooler piping.
  • FORTLUFT provides the guarantee for the Universal Turbo Intercooler Piping Aluminum tightness for the 2-year period without any limitation on the mileage after the spare part installation..
Check Stock

Design Engineering 080108 CryO2 Intercooler Sprayer Kit

  • Enhances intercooler thermal transfer ability.
  • Lowers air temperatures by as much as 35%.
  • Improves intercooler efficiency by as much as 50%.
  • Non-invasive system - Ability to run more boost safely.
  • Straight forward easy bolt on installation.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo....
Check Stock

Rev9 ICK-056-BLACK ICK-056-BLACK Front Mount Intercooler Kit, Stealth Black FMIC Performance Upgrade, Bolt On, compatible with Ford Focus ST 2013-18

  • compatible with Ford Focus ST 2013, 2014, 2015, 2016, 2017, 2018.
  • Larger Intercooler Provides More Efficient Cooling Power Equals More Power.
  • With Wind Deflector To Tunnel Air Into The intercooler.
  • Instant Horsepower And Torque Gain By Replacing Factory Intercooler.
  • Included Hardware For Direct Bolt On Installation.
  • No Install Instructions, Install Perform By Experienced Professional Installer Is Recommended..
Check Stock

AMS Performance Aftermarket Turbo Inlet Tubes Compatible with 2015-2021 F150 2.7L EcoBoost

  • Material: It is made of 100% high quality silicone..
  • Structure: Intake Kit featuring high quality silicone construction, 4-ply polyester.
  • Resistance Temperature Range: Withstands operating temperatures from -40F to 356F(428F) degrees fahrenheit..
  • Pressure Range: 0.3-2.4MPa, special requirement can reach to 3.0MPa..
  • Scope of Application: The Pipe delivers much better air flow for greater efficiency. For charge air, coolant and water, on intercooler, radiator, turbocharger and supercharger, and other systems..
Check Stock

CXRacing Aluminum Y Pipe Dual 3' to 4' Cold Air Twin Turbo Intercooler Piping

  • CXRacing Aluminum Y Pipe, Dual 3" to Single 4", For Air Intake or Intercooler Piping.
Check Stock

Wire Harness Connector For Bosch Water Pumps Adapter Fitting

  • 12V DC Water /Coolant Pump for Radiator/Heat Exchanger. Perfect for Air to water Intercooler, Super Charger Applications..
  • Volume: 30L/Min (8 Gal/Min)- Inlet outlet: 3/4" (O.D.)- 9500rpm Brushless Motor- Voltage: 12V DC- Current: 2.8A±10%- Capacity: 30L/Min (8 Gal/Min or....
Check Stock

Mishimoto Black Oil Catch Can

  • Separates oil particles from PCV/CCV air.
  • Diameter: 3.25" / Can Height: 5" / Overall Height: 6".
  • Inlet & Outlet: 9/16" / Weight: 1.3lbs / Fluid Capacity: 16oz.
  • Defends intercooler, intake system, and essential components from oil blow-by.
Check Stock

Phillips 66 Victory AW 20w50 Aviation Oil Case of 12qts

  • For BMW E82 E88 135i 1M E90 E91 E92 335i E89 Z4.
  • Core length: 20",core height: 6" (lower side ) 8 " ( taller side).
  • Core thickness: 5",inlet / outlet size: 3.25",end to end length: 27"approx..
  • 50 % + more volume air flow then oem intercooler.
Check Stock

28' x 7' x 2.5' Universal Turbo Intercooler with Front Mount Intercooler 12pcs 2.5' Coupler + Chrome Piping + Intercooler Kit+T-Bolt Clamps Black

  • Made of high quality aluminum material, it is durable and sturdy for you use a long time. And it is perfect for all the turbo car, upgrade and replacement..
  • 1. Made of High quality T-6061 Lightweight Aluminum Piping 2. 2.5" Piping Diameter 3. Perfect for all the turbo car, upgrade, replacement 4. Increase 65% air flow comparing with other standard piping.
  • Piping Kit Feature: Will increase about 10-20HP,Size: 2.5",Pipe Thickness: 1/16 in. (1.58 mm),Max. PSI: 30 Up to 400HP.
  • Intercooler: Core Size: 28" x 7" x 2.5",Color: chrome,Max. PSI: 30 Up to 400HP,Fitment: Universal for all the turbo car,upgrade,replacement.
  • Package Inlcludes:1 x Intercooler,6 x 90 Degree Long-Pipes,4 x 90 Degree Short-Pipes,2 x Straight Pipes,24 x T-Bolt Clamps,12 x Hoses and Necessary Hardware.
Check Stock