Reviews Air Tank Pressure Release Valve

SMACO Scuba Diving Equipment 1L Mini Scuba Tank with Hand Pump Support 15-20 Minutes Underwater Breathing(No More Than 30m) S400Pro Diving Oxygen Tanks for Diving Sightseeing/Backup Air Source, Black

  • ✅【Longer Diving Time】The S400 diving cylinder can be used for 15-20 minutes when it is full of air (it's a test result in an environment of 16 ft underwater and 50°F, the diving time related to many factors: water temperature, water pressure, and personal breath rate and so one). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft)..
  • ✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
  • equipped with air switch, which can be turned off when not use to avoid air leak.
  • equipped with pressure gauge to see the real-time pressure.
  • the release valve is equipped in the breath valve, can easily release pressure..
  • ✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
  • equipped with a weight belt, you can carry the gas cylinder on your waist and move freely.
Check Stock

Scuba Tank 1L Mini Scuba Tank Support 15-20 Minutes Underwater Breathing No More Than 30m Scuba Diving Accessories Diving Oxygen Tanks for Water Rescue/Diving Sightseeing/Backup Air Source Green

  • ...iation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
  • equipped with air switch, which can be turned off when not use to avoid air leak.
  • equipped with pressure gauge to see the real-time pressure.
  • the release valve is equipped in the breath valve, can easily release pressure..
  • ✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
  • equipped with a weight-bearing strap, the gas cylinder can be fixed to the chest, and we can check air pressure at any time underwater.
  • The scuba tank will be split into three parts in the package: bottle body, regulator, and breathing valve, you need to assemble it by yourself before inflation and use it. You can also take it on the plane after disassembly, and inflate it at the destination..
  • ✅【Multiple Inflation Methods】Use the scuba adapter is the most efficient way to inflate, you can use the scuba adapter to introduce compressed air into the SMACO cylinder from a large cylinder, it only need 8-10s to full fill it.
  • If you have an electric pump, it usually cost 12-15 mins, but please EQUIPPED WITH AN OIL-WATER SEPAR....
Check Stock

Scuba Tank with Hand Pump Mini Scuba Tank Support 15-20 Mins Underwater Breathing No More Than 30m Scuba Equipment Diving Oxygen Tanks for Water Rescue/Diving Sightseeing/Backup Air Source Green

  • ...iation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
  • equipped with air switch, which can be turned off when not use to avoid air leak.
  • equipped with pressure gauge to see the real-time pressure.
  • the release valve is equipped in the breath valve, can easily release pressure..
  • ✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
  • equipped with a weight-bearing strap, the gas cylinder can be fixed to the chest, and we can check air pressure at any time underwater.
  • The scuba tank will be split into three parts in the package: bottle body, regulator, and breathing valve, you need to assemble it by yourself before inflation and use it. You can also take it on the plane after disassembly, and inflate it at the destination..
  • ✅【Multiple Inflation Methods】Use the scuba adapter is the most efficient way to inflate, you can use the scuba adapter to introduce compressed air into the SMACO cylinder from a large cylinder, it only need 8-10s to full fill it.
  • If you have an electric pump, it usually cost 12-15 mins, but please EQUIPPED WITH AN OIL-WATER SEPAR....
Check Stock

Scuba Tank with Hand Pump Mini Scuba Tank Support 15-20 Mins Underwater Breathing(No More Than 30m) Scuba Equipment Diving Oxygen Tanks for Water Rescue/Diving Sightseeing/Backup Air Source, Black

  • ...iation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
  • equipped with air switch, which can be turned off when not use to avoid air leak.
  • equipped with pressure gauge to see the real-time pressure.
  • the release valve is equipped in the breath valve, can easily release pressure..
  • ✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
  • equipped with a weight-bearing strap, the gas cylinder can be fixed to the chest, and we can check air pressure at any time underwater.
  • The scuba tank will be split into three parts in the package: bottle body, regulator, and breathing valve, you need to assemble it by yourself before inflation and use it. You can also take it on the plane after disassembly, and inflate it at the destination..
  • ✅【Multiple Inflation Methods】Use the scuba adapter is the most efficient way to inflate, you can use the scuba adapter to introduce compressed air into the SMACO cylinder from a large cylinder, it only need 8-10s to full fill it.
Check Stock

PointZero 1/3 HP Double Piston Airbrush Compressor with Air Tank, Regulator, Gauge and Water Trap - Quiet Professional Pump

  • ...livers excellent power with approximate air delivery of 1.3 CFM, with advanced, precision-forged pistons for very little noise (59 dB). Oil-less design makes this compressor suitable for food decorating and body/nail art along with all other standard airbrushing applications..
  • Smooth, precise air output: A sensitive pressure regulator with integrated gauge and water-trap allows precise adjustment and control of airflow to deliver clean, dry air.
  • Power-saving & dual-operating modes: When switched on in the primary position, compressor runs until pressure reaches approximately 60 psi, then cycles off until the pressure drops to 40 psi, when the unit restarts. This power-saving feature reduces motor wear while maintaining enough pressure to operate most airbrushes. In the secondary switch position, the compressor runs continuously, when maximum output is desired (up to 85 psi)..
  • Constant pressure with zero pulsation: Air is drawn from the large, 3.5-liter (1 gallon) air storage tank, providing constant, regulated pressure and smooth output. This eliminates the pressure pulsations common with tankless compressors. Tank features a threaded drain plug for purging any accumulated water and a pressure-release valve for safety (release pressure prior to dra....
Check Stock

4Pcs 1/8' NPT Tank Valve, A.I.FORCE Air Compressor Tank Fill Valve with Anti-Corrosion Brass Schrader Valve and Caps, 4Pcs Extra Replacement Valve Stems Cores and Schrader Valve Tool

  • [WHAT YOU GET] – You will get 4Pcs 1/8" NPT Tank Valve with built-in Schrader valves and valve caps, 4Pcs Extra Replacement Valve Stems Cores and 1Pc Schrader Valve Tool..
  • [MAIN FUNCTION] – The air compressor box filling valves can prevent air from leaking out while allowing for air to pass through for inflation. The 4 extra Schrader Valves work for replacement valve core. With Schrader Valve Tool, we can tighten the valve core or replace Schrader Valve if there is a leakage..
  • [WIDE APPLICATION] - The 1/8" Male NPT Tank Valves are used for air compressor tanks to fill vessels with air. Through the Tank valve, we can fill up the vessels with our air compressors in a rapidly speed..
  • [SPECIFICATIONS] – The air tank valves with 1/8'' NPT Male Threads and Schrader Valve. Max working pressure 200psig and Do not Exceed Maximum pressure. Teflon or similar tape can be used during install on the threaded area that screws into the tank etc..
  • [HEAVY DUTY DESIGN] – The 1/8 schrader valves are made of solid brass, which is durable, rustproof and durable. Nickel plating valve stem core can effectively prevent rust and corrosion..
Check Stock

GODESON 1/8'NPT Tank Valve, Anti-Corrosion Brass Schrader Valve with 1/8'Male NPT,Using with Air Compressor Tanks( Pack of 4)

  • 1.USING WITH AIR COMPRESSOR TANK: GODESON 1/8" NPT Tank Valve Prevents Air from Leaking out while Allowing for Air Inflating in.
  • 2.HEAVY DUTY DESIGN:100% Anti -Corrosion Solid Brass. 1/8" Male National Pipe Thread with Schrader Valve.
  • 3.LIMITED PRESSURE:Max Working Pressure of 200PSI ..
  • 4.INCLUDES: Come with 4 Pieces Tank Valve and 4 Caps.
  • 5.SATISFACTION GUARANTEED：1 Year Warranty, Whatever Problems You Meet with Our Tank Valve, Please Contact Us for the Solution.
Check Stock

California Air Tools 1810C 10 Gallon Casting Pressure Pot

  • 【EXCELLENT QUALITY】- This paint pressure pot is made of high-quality metal material, has the anti-rust function, and is very durable. All delicate components can be used for a long time..
  • 【LARGE CAPACITY】- Pressure pots for painting have a 10 liters (2.5 gallons) volume pressure tank, which is suitable for large-capacity paint and industrial applications..
  • 【SAFETY DESIGN】- Pressure gauge and fluid pressure regulator ensure accurate setting, safety and stability, and long service life..
  • 【HEAVY-DUTY NOZZLE】- Nozzle of this paint pressure pot is a simple operation, uniform atomization, improved work efficiency, suitable for spraying various solvents and water-based coatings..
  • 【WIDELY USE】 - Painting pressure pot is widely used in automotive, oil-based, latex, varnish, paint, primer, wood coating, adhesive, and other coatings. Note: Check whether there is still pressure in the tank every time before opening the lid. If so, release with an air pressure relief valve..
Check Stock

Portable Scuba Tanks,2.3L Scuba Diving Gear,DOT Certified Tanks，Underwater 30-45 Minutes Diving Tank,Bacup Air Tanks

  • ★【2.3LDiving Tank Package】The D23-A incorporates improvements to the diving package, including bottle head first stage valves and pressure gauges, as well as pressure tubes,and added some configurations to enhance the diving experience.The total weight of D23-A diving package is 4.6kg. It can be carried directly for short distances, and can be transported in the car if traveling..
  • ★【Bottle top valve】: The main material of D23-A bottle top valve is brass chrome plating, using vacuum color plating process, to improve the anti-seawater corrosion performance, and more beautiful appearance. The bottle valve has a low pressure interface, which can be connected to BCD or life jacket for better applicability. The air inlet adopts high precision filter core, which can filter particles over 5 microns. The scuba tank is stamped with the DOT certification mark, you can always check..
  • ★【Pressure gauge and pressure tube】: D23-A scuba tank uses A more stable pressure tube, which is made of PVC and butadiol mixture material. It can bear A maximum pressure of 10MPa, and the internal pressure is only 0.8-1.2mpa in normal use. In order to make it easier to check the remaining air in the tank during the dive, we use an extended tube connection pressure g....
Check Stock

BESTOOL Air Hydraulic Pump - 10,000 PSI Hydraulic Foot Pump Pressure 1/2 Gal Air Over Hydraulic Pump (Single Acting) Green - with Hose

  • BESTOOL Air actuated hydraulic treadle pump internal pressure relief valve for overload protection, prevent oil leakage.The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Air powered hydraulic pumps maximum adjustable pressure: 10,000PSI, used for all 10-ton applications.Output oil 98 cubic inches/1.6 liters Fuel tank.Connector Type: 3/8" NPT quick hydraulic coupler with dust cap..
  • This hydraulic ram pump features a high-quality aviation aluminum pump core and with a more durable aluminum reservoir.Hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer..
  • The air over hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • This air hydraulic foot pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications..
Check Stock