Reviews Air Intake 2

Air Intake Hose - Compatible with Honda Accord V6 2003-2007 and Acura TL 2004-2006 - Replaces 17228-RCA-A00 696-001

  • Replacement Air Intake Hose - This air intake hose some times known as an intake duct, intake boot, or intake tube is located between the air intake....
  • Compatible Replacement for Honda Accord & Acura TL - This air intake hose is a direct replacement for the factory air intake hose on Accord V6 3.0....
  • Replaces Part# - 17228-RCA-A00, 17228RCAA00, 17228 RCA A00, 696-001, 696001 This air intake hose is a direct replacement for these part numbers which....
  • OEM Fit, Quality, Finish - This air intake hose is constructed of a high temperature rubber that will not break down and crack like the factory hose.....
  • Lifetime Warranty - This air intake hose for your Accord or TL comes complete with a Lifetime warranty. If the intake hose cracks, chips, or breaks in....
Check Stock

Air Intake Hose - Compatible with Honda Accord 2.4L 2003 - 2007 - Replaces 696-739 17228-RAA-A00

  • Replacement Air Intake Hose - This air intake hose some times known as an intake duct, intake boot, air filter hose, or intake tube is located between....
  • Compatible Replacement for Honda Accord Vehicles - This air intake hose is a direct replacement for the factory air intake hose on Accord 2003, 2004,....
  • Replaces Part# - 17228-RAA-A00 , 17228 RAA A00 , 17228RAAA00, 696-739 This air intake hose is a direct replacement for these part numbers which are....
  • OEM Fit, Quality, Finish - This air intake hose is constructed of a high temperature rubber that will not break down and crack like the factory hose.....
  • Lifetime Warranty - This air intake hose for your Accord comes complete with a Lifetime warranty. If the intake hose cracks, chips, or breaks in....
Check Stock

XTechnor Tesla Model 3 Air Intake Filters Cabin Air Vent Intake with Activated Carbon Air Conditioning Air Intake Inlet Cover for 2017 2018 2019 Tesla Model 3

  • Best Part to keep filter life longer- XTechnor Tesla Model 3 Air Intake Filters is Customed fit for 2017 2018 2019 Tesla model 3 exterior accessories frunk air inlet cover..
  • UPGRADED PROTECTION- Unlike the other intake grille, XTechnor carbon air inlet vent cover can keep leaves or small stuff from clogging up and block impurities, fall into the AC intake system. Even prevents harmful fine particles and dust from entering the vehicle cabin while keeping clean and healthy environment to passengers..
  • Apply High Quality Air Filter: (1)Fine fiber filter paper and small molecular material, with dust collection and filtration effect.
  • (2)High-performance activated carbon strongly adsorbs odors and harmful gases in the air.
  • (3)A melt blown electrostatic layer is added to trap fine particles by electrostatic charge..
  • ONE STEP TO INSTALL- It is easy to Install, take off the original air conditioning air intake grille cover, and just place the air intake filters to there without any tools..
  • XTechnor PROMISE – We offer a LIFETIME, NO-QUESTIONS-ASKED, MONEY-BACK GUARANTEE to our tesla model 3 owner after ordering our car air filter..
Check Stock

Air Intake Filter,Akozon 13mm/0.5in Mini Air Intake Filter Vent Crankcase Breather Universal Car Accessory(Noire )(black) for crankcase vent filter

  • APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 13 mm/0.5 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter for pcv breather filter.
  • APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 0 mm/1 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter.
  • EXCELLENT FUNCTION: The car air filter can increase the intake air flow, filter the impurities in the air, make the engine breathe more smoothly, prevent the dust suspended in the air from being sucked into the cylinder, and reduce the wear of the piston group and the cylinder. for 7/8" crankcase vent filter for d16 valve cover intake.
  • UNIQUE DESIGN: The unique shape reduces the air intake resistance of the engine and improves the air intake and volumetric efficiency per unit time when the engine is running. for valve cover breather for k n crankcase filter.
  • HIGH-QUALITY MATERIALS: The car air filter is made of Nonwoven Fabric, which is very breathable, very durable, and has a long service life, which enhances the ability of car air filtration. for crankcase breather filter for 301 predator valve vent filter.
Check Stock

Universal Car Air Intake Pipe, 63mm 2.5\ Modified Air Intake Flexible Expansion Pipe Ducting Silicone Hose

  • Compatible with Universal Cold Air Intake fits for most vehicles with intake/tube/hose size 63mm/2.5inch.
  • Designed for Designed for discharging cold or hot air from car engine compartment and braking system. Air intake Expansion Pipe is very flexible ducting and easy installation.
  • Extendable Easy to buckle and good tensile. It can extend to 1 meter, easy to use. Air intake Expansion Pipe is very flexible ducting and easy installation.
  • Durable Made of high quality silicone. heat-resistant, excellent electric insulating and waterproof. Bore size 63mm. Please check the size before purchasing.
  • Quality Warranty Friendly return policy and customer service. Any questions, please feel free to contact with us.
Check Stock

Tetra Whisper Bio-Bag Disposable Filter Cartridges 3 Count, For aquariums, Medium (26169)

  • Ultra Quiet: Made of ABS thickening engineering plastics, super silent aquarium air pump. Soft rubber foot pads, further palliation for noise..
  • Long Service Life: Manually adjustable air volume, won’t cause shakes and electric field fluctuation, much safer than electronic adjustment, lower failure rate..
  • Aquarium Air Pump with 2 outlets, dual hose fish tank air pump, fit for fish tanks from 20 to 100 gallon..
  • Unique Design: The air intake cotton is replaceable, it can filter the impurities in the air and extend the service life of the air pump, also come with 1 more replacement..
  • Complete Accessories: Comes with everything you need, includes: 2 x Return Valve, 2 x Air Stone,2 x Air tube (2 x 4.9ft), Connector, Air intake cotton. Original quality, professional manufacturer..
Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

  • 【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
  • 【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
  • 【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..
Check Stock

Skunk2 907-05-9051 Ultra Series Intake Manifold Spacer

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

GY6 50CC 49CC Carburetor with Electric Choke for 4 Stroke Scooter Moped 139QMA 139QMB Taotao Engine PD18J Carb with Intake Manifold Air Filter kit

  • GY6 50cc Carburetor with 2-pin Male Electric Choke 18mm Intake Manifold.
  • GY6 50CC Carburetor comes with a #75 Main Jet. upgraded jets for better starting, idling and performance..
  • Size:Intake Manifold Side:18mm(Inner Diameter),28mm(Outer Diameter).
  • Air Filter Intake:35mm(inner diameter),39mm(Outer Diameter) ..
  • This is a 18mm Intake Carburetor,it fits most 4 stroke GY 49CC 50cc 80c 139QMA 139QMB Engine scooters carb, such as Taotao Baja, JMstar, Jonway,....
  • Package include: 1x Carburetor,1x Air Filter,1x Fuel Filter，1x Plug Spark,1x Intake Manifold，2 xGaskets..
Check Stock

AP A-Premium Engine Air Cleaner Intake Hose Tube Replacement for Honda Accord 2003-2007 V6 3.0L Only Acura TL 2004-2006 V6 3.2L

  • 【Vehicle Fitment】Compatible with Acura TL Base 2004-2006 3.2L Sedan.
  • Compatible with Honda Accord EX 3.0L, LX 2003-2007 Coupe & Sedan, SE 2005....
  • 【Specification】With 1PC Air Intake Hose---(Inside Diameter: 2.8 inch.
  • 【Buy with Confidence】OE replacement Air Intake Hose, easy to install. It is made of rubber materials that contain the component of high-tenacity....
  • 【Importance of Parts】The air intake hose plays an important parts that fixes between air intake box and throttle body on vehicle, which connects....
  • 【Reference Number】(Make sure this part fits your vehicle exactly) OEM Part Number: 17228-RCA-A00, 17228RCAA00, 696-001.
Check Stock