Reviews Air Cooled Condenser Supplier

WeldingCity TIG Welding Torch Accessory Kit Large Gas Lens Setup 1/8 Collet-Large Gas Lens-Cup-Gasket-Back Cap for Torch 9 20 and 25 Series Lincoln Miller Hobart ESAB Weldcraft CK AHP T45

  • Premium TIG welding torch accessory kit (large gas lens set-up) for air-cooled and water-cooled TIG torch 9, 20 and 25 series for use with Tungsten....
  • Accessory kit contains torch consumables 13NL-series collets and 45VS large gas lens collet bodies (0.040", 1/16", 3/32" and 1/8"), 53N/57N-series....
  • Detailed content description for each accessory kit is shown in listed parts table and pictures. Compatible with TIG welding torches from Lincoln,....
  • For use with air-cooled TIG welding torch 9-series (125-amp), water-cooled 20-series (250-amp) and 25-series (200-amp)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Laboy Glass Liebig Condenser with 24/40 Joints 300mm in Jacket Length Used in Reflux or Distillation Aapparatus Chemistry Lab Glassware with 10mm Glass Hose Connections

  • SIMPLE DESIGN EASY SETUP----The liebig condenser is the most basic water-cooled condenser,also named “water condenser”,which consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket to condensate the vapor in the inner tube,having a better cooling performance than air condenser..
  • COMMONLY USED ----A liebig condenser commonly used in a distillation apparatus,also in reflux process and soxhlet extraction can be placed in vertical and oblique position as a reflux condenser and a distillation condenser.As jointed glassware part,it is usually used with a round bottom flask,a three way distillation adapter,a take off adapter to assemble a distillation or reflux setup..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connectionsconnecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With the jacket length of 300mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • BUY WITH CONFIDENCE----100% 90 DAY MONEY ....
Check Stock

Klimaire 3 Ton Light Commercial Floor/Ceiling Inverter Heat Pump System (36K BTU_208-230V 16 SEER)

  • Klimaire Floor/Ceiling Inverter Heat Pump system includes indoor floor/ceiling unit, outdoor condenser, wall bracket, 15-ft installation kit, and remote control. Great option for Hydroponic indoor gardens. AHRI Certified & ETL Intertek Approved..
  • Slim stylish profile, off white color to blend in any deco. Can be mounted low on the wall, floor, or ceiling suspended without any modifications. Extremely quiet and rugged construction makes it ideal for areas of heavy traffic..
  • Using remote control, set the unit to auto swing. 3D air flow ensures that your commercial space is cooled evenly and prevents a continuous blast of cold air in one direction. This is especially important in commercial applications such as hydroponic indoor gardens or restaurants..
  • Fresh air outside can be led into the room via a connection pipe, which keeps the indoor air fresh and healthy. Standard features include sleep mode, 2-way draining, auto-restart function, anti-cold air function, independent dehumidification, timer, low ambient cooling, and auto defrosting..
  • Washable, re-usable air filter for easy maintenance. Indoor floor/ceiling is pre-vacuumed. Outdoor condenser is pre-charged up to 25-ft. With a built-in base pan heater, it ensures reliable operation in temperatures as l....
Check Stock

DADAKEWIN 400mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 400mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/40, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 29/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 29)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 300mm/24 * 29)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Color : 300mm/24 * 40)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 24/40, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 400mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 400mm/24 * 29)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 29/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 300mm/29 * 2)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 29/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock