Reviews Air Brake Tool

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

OEMTOOLS 25252 Automatic Slack Adjuster Release Tool and Wrench, Slack Adjuster Tools for Big Truck, Trailer Brake Adjustment Tool, Hand Tools for Mechanics

  • SLACK ADJUSTER TOOLS: Our slack adjuster tool set is designed to aid in the installation and servicing of Meritor-brand air braking systems on heavy-duty trucks, long-haul trucks, and trailers.
  • Brake adjustment tool simplifies brake service.
  • CONVENIENT FEATURES: The slack adjuster wrench tool comes with a 5/16 inch double-square head and a built-in offset ratcheting mechanism that provides extra clearance for hands and knuckles.
  • Ratcheting brake tool speeds up installation and service.
  • EASY TO USE: This Meritor slack adjuster features a side-mounted forward and reverse lever, allowing for quick direction changes without removing the brake adjuster tool from the slack adjuster.
  • Convenient hand tools for any mechanic tool set.
  • HANDS-FREE OPERATION: The fork-end slack tool fits securely under the pull pawl for hands-free operation to release the tension button.
  • Truck slack adjuster fork-end tool retains tensioner release button securely without prying or causing damage.
  • COMFORTABLE TRUCK BRAKE TOOLS: Our double-square offset reversible truck tool wrench comes with an EZ grip handle fo....
Check Stock

DUOYI Brake Spring Tool, 5081 S-Cam Air Brake Tools Replace for Semi Trucks Brakes Shoes, Brake Tools for Heavy Duty Trucks, Tractors & Trailers, Steel Mechanic Tool for Automotive Brake Repair

  • 【Air Brake Spring Tool】 It is safer and easier to replace the heavy duty tractors and trailers brake shoes, without the need for screwdrivers or tool pliers to remove the brake shoes..
  • 【Brake Spring Tool is Easy to Operate】Just hook the tab to the fixed spring ring, press the bar end down on the shaft, hold the handle and push it down and inward until the spring ring is firmly fixed on the brake shoe..
  • 【Principle of Use of Spring Tools】The end of this spring tool is in a "v"-shaped structure, which effectively utilizes the principle of leverage and is against the axle to separate the spring ring from the brake shoe more safely and easily..
  • 【Brake Adjustment Tool is Made of High-quality Steel】Made of selected high-quality steel, wear-resistant and strong, durable..
  • 【Note】This tool is used for heavy machinery vehicles such as tractors and trailers. Pay attention to safety during operation and use..
Check Stock

Phoenix Systems (2005-B) Bench Brake Bleeder Kit, One Person Bleeder, Fits All Makes and Models

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bench bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The Bench Bleeder is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

Phoenix Systems (2003-B) V-12 Reverse Brake & Clutch Bleeder Kit, Medium Duty One Person Bleeder, Hard Case

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The V-12 is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid. Comes with a injection molded hard case..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

OEMTOOLS 27311 Power Steering and Brake Bleed Adapter Kit Works w/Hand Vacuum Bleeder Brake Line Bleeder Kit w/ 2 Rubber Power-Steering Adapters

  • POWER STEERING BLEEDER: Power steering adapter kit works on most vehicles.
  • Meant to be used with a hand vacuum brake bleeder.
  • ACCESSIBLE BRAKE BLEEDER KIT: Not just a power steering bleeder.
  • Select one of 3 different sized brake bleed adapters for your caliper, hook up the....
  • REMOVE AIR FROM LINES: Remove trapped air with this power steering and brake bleeder adapter kit.
  • Check that your vehicle’s power steering reservoir....
  • HAND VACUUM PUMP READY: Couple the power steering fluid tool and brake system bleeding tools with a hand vacuum pump to effectively bleed air without....
  • DURABLE TIGHT FITTING COMPONENTS: This power steering vacuum adapter kit comes with 2 EPDM tapered rubber adapters and 3 rubber brake bleeder....
Check Stock

OTC 5081 S-Cam Air Brake Spring Tool

  • OTC's S-Cam Air Brake Spring Tool eliminates makeshift, unsafe methods of unhooking and reconnecting brake shoe retaining springs.
  • For use when replacing brake shoes on heavy-duty tractors and trailers.
  • Simply hook the retaining spring loop and press down.
  • Lever action agains the axle makes the job a snap.
  • Crafted from high-grade materials to ensure quality performance over the lifetime of the tool.
Check Stock

Bestong 5081 S-Cam Air Brake Spring Tool Compatible for Heavy-Duty Tractors and Trailers Diesel Drive Semi-Truck Replace Brake Shoe

  • 【 Compatible for 】: works great on tractor and trailer brakes, any heavy duty brakes!.
  • 【 Material】: Corrosion-resistant & Durable Steel construction with extreme anti-wear property..
  • 【 Installation】: This tool makes install spring on the S Cam Air Brake a snap. No more using vise grip and screwdriver to remove brake shoes.Simply hook the retaining spring loop and press down against the axle..
  • 【 Features 】: Best choice for doing brakes in a hurry. Serve as a lever against the axle to seperate the spring loop from the brake shoe. Safely replace brake shoes..
  • 【 Package included 】: 1pcs S-Cam Air Brake Spring Tool . 【 100% Satisfaction service 】— If you're not 100% satisfied with our PRODUCTS, simply return it for a full refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase.Thank you..
Check Stock

Fauvipone 5081 S-Cam Air Brake Spring Compressor Tool, Brake Shoes Installer Tool, Compatible for Heavy-Duty Tractors and Trailers Diesel Drive Semi-Truck Replace Brake Shoe

  • ✔【Brake Spring Tool for Replacing Brake Shoes】This s-cam air brake spring tool is a better alternative to a vise grip, pry bar or screwdriver, and is used to safely replace brake shoes on heavy-duty tractors, trailers and semi-trucks..
  • ✔【Hook Design】There are some pliers similar to car brake spring calipers, but in most cases, you can't use them in close proximity to the brake chambers or suspension. The semi brake spring tool does not have this problem, and it will not take up too much space in your toolbox..
  • ✔【Better Material】The heavy-duty semi brake spring tool is made of high-quality hard steel material, which has excellent performance of anti-wear and corrosion resistance and is durable.
  • ✔【Easy to use 】No additional tools such as vices and screwdrivers are needed. Just hook the fixed spring ring and press down on the shaft. The semi trailer brake tools only take a few seconds to easily remove and install the shoe spring..
  • ✔【100% GUARANTEE】All products have a lifetime warranty, Every time you buy, you will enjoy the fast and convenient FBA service. Contact us if you notice any questions about product. We'll try our best to solve your concern as soon as possible..
Check Stock